I just tested the new 4.10-BETA code to see if it had improved any
of the issues I had running HTTP under 4.9. Unfortunately they still seem
to be present. If I have a kernel configured with SMP options and I enable
HTT then I see random errors in processes. These are not the normal "signal
11"
things that I would associate with bad memory, but are odd occurrances such as
the exit code from a process being wrong, or the exeutable created by a
compile not running. Repeating the command will usually give the correct
results.
I had this issue originally with 4.9. I have not tested it with previous
versions as I did not have an HTT processor when running older systems.
The machine is a Dell Prescision 450 Workstation. The dmesg from a boot
is below (with the CPU disabled) as is the output from mptable in case it
helps anyone. I realise that other people are running with HTT quite happily
though, and this doesnt bother me as I just build a ketnel with no SMP
enabled. But as we were asked to test SMP in 4.10 I thought I should
mention it.
-pcf.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.10-BETA #0: Tue Apr 13 11:46:26 BST 2004
petefrench@dilbert.rattatosk:/usr/obj/usr/src/sys/DILBERT
Timecounter "i8254" frequency 1193182 Hz
CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2392.04-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf29 Stepping = 9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory = 536301568 (523732K bytes)
avail memory = 517771264 (505636K bytes)
Changing APIC ID for IO APIC #0 from 0 to 8 on chip
Changing APIC ID for IO APIC #1 from 0 to 10 on chip
Changing APIC ID for IO APIC #2 from 0 to 9 on chip
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
Programming 24 pins in IOAPIC #1
Programming 24 pins in IOAPIC #2
FreeBSD/SMP: Multiprocessor motherboard: 2 CPUs
cpu0 (BSP): apic id: 0, version: 0x00050014, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00050014, at 0xfee00000
io0 (APIC): apic id: 8, version: 0x00178020, at 0xfec00000
io1 (APIC): apic id: 10, version: 0x00178020, at 0xfec80000
io2 (APIC): apic id: 9, version: 0x00178020, at 0xfec80800
Preloaded elf kernel "kernel" at 0xc03f6000.
Warning: Pentium 4 CPU: PSE disabled
Pentium Pro MTRR support enabled
Using $PIR table, 8 entries at 0xc00feae0
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
IOAPIC #0 intpin 16 -> irq 2
IOAPIC #0 intpin 19 -> irq 13
IOAPIC #0 intpin 18 -> irq 16
IOAPIC #0 intpin 23 -> irq 17
IOAPIC #0 intpin 17 -> irq 18
pci0: <PCI bus> on pcib0
agp0: <Intel Generic host to PCI bridge> mem 0xe8000000-0xefffffff at
device 0.0 on pci0
pcib1: <PCI to PCI bridge (vendor=8086 device=2552)> mem
0xe0000000-0xe7ffffff at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pcib2: <PCI to PCI bridge (vendor=8086 device=2553)> at device 2.0 on pci0
pci2: <PCI bus> on pcib2
pci2: <unknown card> (vendor=0x8086, dev=0x1461) at 28.0
pcib3: <PCI to PCI bridge (vendor=8086 device=1460)> at device 29.0 on
pci2
IOAPIC #1 intpin 1 -> irq 19
IOAPIC #1 intpin 2 -> irq 20
IOAPIC #1 intpin 0 -> irq 21
pci3: <PCI bus> on pcib3
mpt0: <LSILogic 1030 Ultra4 Adapter> port 0xec00-0xecff mem
0xfe3c0000-0xfe3dffff,0xfe3e0000-0xfe3fffff irq 19 at device 12.0 on pci3
mpt1: <LSILogic 1030 Ultra4 Adapter> port 0xe800-0xe8ff mem
0xfe380000-0xfe39ffff,0xfe3a0000-0xfe3bffff irq 20 at device 12.1 on pci3
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.25> port
0xe4c0-0xe4ff mem 0xfe360000-0xfe37ffff irq 21 at device 14.0 on pci3
em0: Speed:N/A Duplex:N/A
pci2: <unknown card> (vendor=0x8086, dev=0x1461) at 30.0
pcib4: <PCI to PCI bridge (vendor=8086 device=1460)> at device 31.0 on
pci2
pci4: <PCI bus> on pcib4
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xff80-0xff9f irq
2 at device 29.0 on pci0
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xff60-0xff7f irq
13 at device 29.1 on pci0
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xff40-0xff5f irq
16 at device 29.2 on pci0
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <USB controller> at 29.7 irq 17
pcib5: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
pci5: <PCI bus> on pcib5
pcib6: <PCI to PCI bridge (vendor=3388 device=0022)> at device 13.0 on
pci5
IOAPIC #0 intpin 21 -> irq 22
IOAPIC #0 intpin 21 -> irq 22
pci6: <PCI bus> on pcib6
drm0: <Matrox G400/G450 (AGP)> mem
0xfd000000-0xfd7fffff,0xfdefc000-0xfdefffff,0xf6000000-0xf7ffffff irq 14 at
device 0.0 on pci6
info: [drm] AGP at 0xe8000000 128MB
info: [drm] Initialized mga 3.1.0 20021029 on minor 0
drm1: <Matrox G400/G450 (AGP)> mem
0xfc800000-0xfcffffff,0xfdef8000-0xfdefbfff,0xf4000000-0xf5ffffff irq 14 at
device 4.0 on pci6
info: [drm] AGP at 0xe8000000 128MB
info: [drm] Initialized mga 3.1.0 20021029 on minor 1
drm2: <Matrox G400/G450 (AGP)> mem
0xfc000000-0xfc7fffff,0xfdef4000-0xfdef7fff,0xf2000000-0xf3ffffff irq 14 at
device 8.0 on pci6
can't re-use a leaf (name)!
info: [drm] AGP at 0xe8000000 128MB
info: [drm] Initialized mga 3.1.0 20021029 on minor 2
drm3: <Matrox G400/G450 (AGP)> mem
0xfb800000-0xfbffffff,0xfdef0000-0xfdef3fff,0xf0000000-0xf1ffffff irq 14 at
device 12.0 on pci6
can't re-use a leaf (name)!
info: [drm] AGP at 0xe8000000 128MB
info: [drm] Initialized mga 3.1.0 20021029 on minor 3
isab0: <PCI to ISA bridge (vendor=8086 device=24c0)> at device 31.0 on
pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 ATA100 controller> port
0xffa0-0xffaf,0-0x3,0-0x7,0-0x3,0-0x7 irq 16 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <unknown card> (vendor=0x8086, dev=0x24c3) at 31.3 irq 18
pcm0: <Intel ICH4 (82801DB)> port 0xdc40-0xdc7f,0xd800-0xd8ff mem
0xfe500000-0xfe5000ff,0xfe500400-0xfe5005ff irq 18 at device 31.5 on pci0
pcm0: <Analog Devices AD1981B AC97 Codec>
orm0: <Option ROMs> at iomem
0xc0000-0xc87ff,0xc8800-0xcc7ff,0xcc800-0xcdfff,0xce000-0xcffff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
SMP: AP CPU #1 Launched!
acd0: CD-RW <SONY CD-RW CRX216E> at ata1-master PIO4
Waiting 3 seconds for SCSI devices to settle
Mounting root from ufs:/dev/da0s2a
da0 at mpt1 bus 0 target 0 lun 0
da0: <FUJITSU MAP3367NP 5608> Fixed Direct Access SCSI-3 device
da0: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged Queueing
Enabled
da0: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C)
em0: Link is up 100 Mbps Full Duplex
==============================================================================
MPTable, version 2.0.15
-------------------------------------------------------------------------------
MP Floating Pointer Structure:
location: BIOS
physical address: 0x000fe710
signature: '_MP_'
length: 16 bytes
version: 1.4
checksum: 0x91
mode: Virtual Wire
-------------------------------------------------------------------------------
MP Config Table Header:
physical address: 0x000f0000
signature: 'PCMP'
base table length: 552
version: 1.4
checksum: 0x5d
OEM ID: 'DELL '
Product ID: 'WS 450 '
OEM table pointer: 0x00000000
OEM table size: 0
entry count: 62
local APIC address: 0xfee00000
extended table length: 0
extended table checksum: 0
-------------------------------------------------------------------------------
MP Config Base Table Entries:
--
Processors: APIC ID Version State Family Model Step Flags
0 0x14 BSP, usable 15 2 9 0xbfebfbff
--
Bus: Bus ID Type
0 PCI
1 PCI
2 PCI
3 PCI
4 PCI
5 PCI
6 PCI
7 ISA
--
I/O APICs: APIC ID Version State Address
8 0x20 usable 0xfec00000
10 0x20 usable 0xfec80000
9 0x20 usable 0xfec80800
--
I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#
ExtINT active-hi edge 7 0 8 0
INT conforms conforms 7 1 8 1
INT conforms conforms 7 0 8 2
INT conforms conforms 7 3 8 3
INT conforms conforms 7 4 8 4
INT conforms conforms 7 5 8 5
INT conforms conforms 7 6 8 6
INT conforms conforms 7 7 8 7
INT conforms conforms 7 8 8 8
INT conforms conforms 7 9 8 9
INT conforms conforms 7 10 8 10
INT conforms conforms 7 11 8 11
INT conforms conforms 7 12 8 12
INT conforms conforms 7 14 8 14
INT conforms conforms 7 15 8 15
INT conforms conforms 0 29:A 8 16
INT conforms conforms 1 0:A 8 16
INT conforms conforms 0 31:B 8 17
INT conforms conforms 1 0:B 8 17
INT conforms conforms 0 31:A 8 18
INT conforms conforms 0 29:C 8 18
INT conforms conforms 0 29:B 8 19
INT conforms conforms 5 13:D 8 20
INT conforms conforms 5 14:C 8 20
INT conforms conforms 5 13:A 8 21
INT conforms conforms 5 14:D 8 21
INT conforms conforms 6 0:A 0 21
INT conforms conforms 6 4:A 0 21
INT conforms conforms 6 8:A 0 21
INT conforms conforms 6 12:A 0 21
INT conforms conforms 5 13:B 8 22
INT conforms conforms 5 14:A 8 22
INT conforms conforms 0 29:D 8 23
INT conforms conforms 5 13:C 8 23
INT conforms conforms 5 14:B 8 23
INT conforms conforms 3 14:A 10 0
INT conforms conforms 3 12:A 10 1
INT conforms conforms 6 0:A 0 1
INT conforms conforms 6 4:A 0 1
INT conforms conforms 6 8:A 0 1
INT conforms conforms 6 12:A 0 1
INT conforms conforms 3 12:B 10 2
INT conforms conforms 3 12:C 10 3
INT conforms conforms 3 12:D 10 4
INT conforms conforms 3 13:A 10 5
INT conforms conforms 3 13:B 10 6
INT conforms conforms 3 13:C 10 7
INT conforms conforms 3 13:D 10 8
--
Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#
ExtINT active-hi edge 7 0 255 0
NMI active-hi edge 7 0 255 1
===============================================================================
I almost wonder if you have a buggy set og CPUs. Have you tried updating the BIOS? Often times updated BIOSes have updated uCode patches for the CPU. Scott Pete French wrote:> I just tested the new 4.10-BETA code to see if it had improved any > of the issues I had running HTTP under 4.9. Unfortunately they still seem > to be present. If I have a kernel configured with SMP options and I enable > HTT then I see random errors in processes. These are not the normal "signal 11" > things that I would associate with bad memory, but are odd occurrances such as > the exit code from a process being wrong, or the exeutable created by a > compile not running. Repeating the command will usually give the correct > results. > > I had this issue originally with 4.9. I have not tested it with previous > versions as I did not have an HTT processor when running older systems. > > The machine is a Dell Prescision 450 Workstation. The dmesg from a boot > is below (with the CPU disabled) as is the output from mptable in case it > helps anyone. I realise that other people are running with HTT quite happily > though, and this doesnt bother me as I just build a ketnel with no SMP > enabled. But as we were asked to test SMP in 4.10 I thought I should > mention it. > > -pcf. > > > Copyright (c) 1992-2003 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 4.10-BETA #0: Tue Apr 13 11:46:26 BST 2004 > petefrench@dilbert.rattatosk:/usr/obj/usr/src/sys/DILBERT > Timecounter "i8254" frequency 1193182 Hz > CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2392.04-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > Hyperthreading: 2 logical CPUs > real memory = 536301568 (523732K bytes) > avail memory = 517771264 (505636K bytes) > Changing APIC ID for IO APIC #0 from 0 to 8 on chip > Changing APIC ID for IO APIC #1 from 0 to 10 on chip > Changing APIC ID for IO APIC #2 from 0 to 9 on chip > Programming 24 pins in IOAPIC #0 > IOAPIC #0 intpin 2 -> irq 0 > Programming 24 pins in IOAPIC #1 > Programming 24 pins in IOAPIC #2 > FreeBSD/SMP: Multiprocessor motherboard: 2 CPUs > cpu0 (BSP): apic id: 0, version: 0x00050014, at 0xfee00000 > cpu1 (AP): apic id: 1, version: 0x00050014, at 0xfee00000 > io0 (APIC): apic id: 8, version: 0x00178020, at 0xfec00000 > io1 (APIC): apic id: 10, version: 0x00178020, at 0xfec80000 > io2 (APIC): apic id: 9, version: 0x00178020, at 0xfec80800 > Preloaded elf kernel "kernel" at 0xc03f6000. > Warning: Pentium 4 CPU: PSE disabled > Pentium Pro MTRR support enabled > Using $PIR table, 8 entries at 0xc00feae0 > apm0: <APM BIOS> on motherboard > apm0: found APM BIOS v1.2, connected at v1.2 > npx0: <math processor> on motherboard > npx0: INT 16 interface > pcib0: <Host to PCI bridge> on motherboard > IOAPIC #0 intpin 16 -> irq 2 > IOAPIC #0 intpin 19 -> irq 13 > IOAPIC #0 intpin 18 -> irq 16 > IOAPIC #0 intpin 23 -> irq 17 > IOAPIC #0 intpin 17 -> irq 18 > pci0: <PCI bus> on pcib0 > agp0: <Intel Generic host to PCI bridge> mem 0xe8000000-0xefffffff at device 0.0 on pci0 > pcib1: <PCI to PCI bridge (vendor=8086 device=2552)> mem 0xe0000000-0xe7ffffff at device 1.0 on pci0 > pci1: <PCI bus> on pcib1 > pcib2: <PCI to PCI bridge (vendor=8086 device=2553)> at device 2.0 on pci0 > pci2: <PCI bus> on pcib2 > pci2: <unknown card> (vendor=0x8086, dev=0x1461) at 28.0 > pcib3: <PCI to PCI bridge (vendor=8086 device=1460)> at device 29.0 on pci2 > IOAPIC #1 intpin 1 -> irq 19 > IOAPIC #1 intpin 2 -> irq 20 > IOAPIC #1 intpin 0 -> irq 21 > pci3: <PCI bus> on pcib3 > mpt0: <LSILogic 1030 Ultra4 Adapter> port 0xec00-0xecff mem 0xfe3c0000-0xfe3dffff,0xfe3e0000-0xfe3fffff irq 19 at device 12.0 on pci3 > mpt1: <LSILogic 1030 Ultra4 Adapter> port 0xe800-0xe8ff mem 0xfe380000-0xfe39ffff,0xfe3a0000-0xfe3bffff irq 20 at device 12.1 on pci3 > em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.25> port 0xe4c0-0xe4ff mem 0xfe360000-0xfe37ffff irq 21 at device 14.0 on pci3 > em0: Speed:N/A Duplex:N/A > pci2: <unknown card> (vendor=0x8086, dev=0x1461) at 30.0 > pcib4: <PCI to PCI bridge (vendor=8086 device=1460)> at device 31.0 on pci2 > pci4: <PCI bus> on pcib4 > uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xff80-0xff9f irq 2 at device 29.0 on pci0 > usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0 > usb0: USB revision 1.0 > uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xff60-0xff7f irq 13 at device 29.1 on pci0 > usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1 > usb1: USB revision 1.0 > uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub1: 2 ports with 2 removable, self powered > uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xff40-0xff5f irq 16 at device 29.2 on pci0 > usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2 > usb2: USB revision 1.0 > uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub2: 2 ports with 2 removable, self powered > pci0: <USB controller> at 29.7 irq 17 > pcib5: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0 > pci5: <PCI bus> on pcib5 > pcib6: <PCI to PCI bridge (vendor=3388 device=0022)> at device 13.0 on pci5 > IOAPIC #0 intpin 21 -> irq 22 > IOAPIC #0 intpin 21 -> irq 22 > pci6: <PCI bus> on pcib6 > drm0: <Matrox G400/G450 (AGP)> mem 0xfd000000-0xfd7fffff,0xfdefc000-0xfdefffff,0xf6000000-0xf7ffffff irq 14 at device 0.0 on pci6 > info: [drm] AGP at 0xe8000000 128MB > info: [drm] Initialized mga 3.1.0 20021029 on minor 0 > drm1: <Matrox G400/G450 (AGP)> mem 0xfc800000-0xfcffffff,0xfdef8000-0xfdefbfff,0xf4000000-0xf5ffffff irq 14 at device 4.0 on pci6 > info: [drm] AGP at 0xe8000000 128MB > info: [drm] Initialized mga 3.1.0 20021029 on minor 1 > drm2: <Matrox G400/G450 (AGP)> mem 0xfc000000-0xfc7fffff,0xfdef4000-0xfdef7fff,0xf2000000-0xf3ffffff irq 14 at device 8.0 on pci6 > can't re-use a leaf (name)! > info: [drm] AGP at 0xe8000000 128MB > info: [drm] Initialized mga 3.1.0 20021029 on minor 2 > drm3: <Matrox G400/G450 (AGP)> mem 0xfb800000-0xfbffffff,0xfdef0000-0xfdef3fff,0xf0000000-0xf1ffffff irq 14 at device 12.0 on pci6 > can't re-use a leaf (name)! > info: [drm] AGP at 0xe8000000 128MB > info: [drm] Initialized mga 3.1.0 20021029 on minor 3 > isab0: <PCI to ISA bridge (vendor=8086 device=24c0)> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel ICH4 ATA100 controller> port 0xffa0-0xffaf,0-0x3,0-0x7,0-0x3,0-0x7 irq 16 at device 31.1 on pci0 > ata0: at 0x1f0 irq 14 on atapci0 > ata1: at 0x170 irq 15 on atapci0 > pci0: <unknown card> (vendor=0x8086, dev=0x24c3) at 31.3 irq 18 > pcm0: <Intel ICH4 (82801DB)> port 0xdc40-0xdc7f,0xd800-0xd8ff mem 0xfe500000-0xfe5000ff,0xfe500400-0xfe5005ff irq 18 at device 31.5 on pci0 > pcm0: <Analog Devices AD1981B AC97 Codec> > orm0: <Option ROMs> at iomem 0xc0000-0xc87ff,0xc8800-0xcc7ff,0xcc800-0xcdfff,0xce000-0xcffff on isa0 > pmtimer0 on isa0 > fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 > fdc0: FIFO enabled, 8 bytes threshold > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 > atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 > kbd0 at atkbd0 > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: model Generic PS/2 mouse, device ID 0 > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > sio0: type 16550A > sio1 at port 0x2f8-0x2ff irq 3 on isa0 > sio1: type 16550A > ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 > ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode > ppc0: FIFO with 16/16/8 bytes threshold > lpt0: <Printer> on ppbus0 > lpt0: Interrupt-driven port > SMP: AP CPU #1 Launched! > acd0: CD-RW <SONY CD-RW CRX216E> at ata1-master PIO4 > Waiting 3 seconds for SCSI devices to settle > Mounting root from ufs:/dev/da0s2a > da0 at mpt1 bus 0 target 0 lun 0 > da0: <FUJITSU MAP3367NP 5608> Fixed Direct Access SCSI-3 device > da0: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged Queueing Enabled > da0: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C) > em0: Link is up 100 Mbps Full Duplex > > > > ==============================================================================> > MPTable, version 2.0.15 > > ------------------------------------------------------------------------------- > > MP Floating Pointer Structure: > > location: BIOS > physical address: 0x000fe710 > signature: '_MP_' > length: 16 bytes > version: 1.4 > checksum: 0x91 > mode: Virtual Wire > > ------------------------------------------------------------------------------- > > MP Config Table Header: > > physical address: 0x000f0000 > signature: 'PCMP' > base table length: 552 > version: 1.4 > checksum: 0x5d > OEM ID: 'DELL ' > Product ID: 'WS 450 ' > OEM table pointer: 0x00000000 > OEM table size: 0 > entry count: 62 > local APIC address: 0xfee00000 > extended table length: 0 > extended table checksum: 0 > > ------------------------------------------------------------------------------- > > MP Config Base Table Entries: > > -- > Processors: APIC ID Version State Family Model Step Flags > 0 0x14 BSP, usable 15 2 9 0xbfebfbff > -- > Bus: Bus ID Type > 0 PCI > 1 PCI > 2 PCI > 3 PCI > 4 PCI > 5 PCI > 6 PCI > 7 ISA > -- > I/O APICs: APIC ID Version State Address > 8 0x20 usable 0xfec00000 > 10 0x20 usable 0xfec80000 > 9 0x20 usable 0xfec80800 > -- > I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# > ExtINT active-hi edge 7 0 8 0 > INT conforms conforms 7 1 8 1 > INT conforms conforms 7 0 8 2 > INT conforms conforms 7 3 8 3 > INT conforms conforms 7 4 8 4 > INT conforms conforms 7 5 8 5 > INT conforms conforms 7 6 8 6 > INT conforms conforms 7 7 8 7 > INT conforms conforms 7 8 8 8 > INT conforms conforms 7 9 8 9 > INT conforms conforms 7 10 8 10 > INT conforms conforms 7 11 8 11 > INT conforms conforms 7 12 8 12 > INT conforms conforms 7 14 8 14 > INT conforms conforms 7 15 8 15 > INT conforms conforms 0 29:A 8 16 > INT conforms conforms 1 0:A 8 16 > INT conforms conforms 0 31:B 8 17 > INT conforms conforms 1 0:B 8 17 > INT conforms conforms 0 31:A 8 18 > INT conforms conforms 0 29:C 8 18 > INT conforms conforms 0 29:B 8 19 > INT conforms conforms 5 13:D 8 20 > INT conforms conforms 5 14:C 8 20 > INT conforms conforms 5 13:A 8 21 > INT conforms conforms 5 14:D 8 21 > INT conforms conforms 6 0:A 0 21 > INT conforms conforms 6 4:A 0 21 > INT conforms conforms 6 8:A 0 21 > INT conforms conforms 6 12:A 0 21 > INT conforms conforms 5 13:B 8 22 > INT conforms conforms 5 14:A 8 22 > INT conforms conforms 0 29:D 8 23 > INT conforms conforms 5 13:C 8 23 > INT conforms conforms 5 14:B 8 23 > INT conforms conforms 3 14:A 10 0 > INT conforms conforms 3 12:A 10 1 > INT conforms conforms 6 0:A 0 1 > INT conforms conforms 6 4:A 0 1 > INT conforms conforms 6 8:A 0 1 > INT conforms conforms 6 12:A 0 1 > INT conforms conforms 3 12:B 10 2 > INT conforms conforms 3 12:C 10 3 > INT conforms conforms 3 12:D 10 4 > INT conforms conforms 3 13:A 10 5 > INT conforms conforms 3 13:B 10 6 > INT conforms conforms 3 13:C 10 7 > INT conforms conforms 3 13:D 10 8 > -- > Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# > ExtINT active-hi edge 7 0 255 0 > NMI active-hi edge 7 0 255 1 > > ==============================================================================> > _______________________________________________ > freebsd-stable@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"