asterisk users - Jan 2012 - Asterisk 10.0 & 1.4 - iax codec are not compatible

I'm trying Asterisk 10.0 (as 8.x is not passing PSTN CallerID) and Asterisk
10.0 is no better.

I'm still getting:
WARNING[12295]: chan_sip.c:14446 check_auth: username mismatch, have <11>,
digest has <pstn-1270>
NOTICE[12295]: chan_sip.c:22769 handle_request_invite: Failed to authenticate
device "KMIEC Z" <sip:7804715665 at 10.0.0.110>;tag=1c1222950155

Anybody know what is the magic solution to get a CallerID to work?

In addition iax -codec are not compatible with earlier asterisk (1.4); I have
selected ulaw / alaw but Asterisk 1.4 wants GSM:

chan_iax2.c:9541 socket_process: Rejected connect attempt from 192.168.141.8,
requested/capability 0x2/0x703 incompatible with our capability 0xc.

-- 
Joseph

----- Original Message -----
> I'm trying Asterisk 10.0 (as 8.x is not passing PSTN CallerID) and
> Asterisk 10.0 is no better.
> 
> I'm still getting:
> WARNING[12295]: chan_sip.c:14446 check_auth: username mismatch, have
> <11>, digest has <pstn-1270>
> NOTICE[12295]: chan_sip.c:22769 handle_request_invite: Failed to
> authenticate device "KMIEC Z"
> <sip:7804715665 at 10.0.0.110>;tag=1c1222950155
> 
> Anybody know what is the magic solution to get a CallerID to work?
> 
> In addition iax -codec are not compatible with earlier asterisk (1.4);
> I have selected ulaw / alaw but Asterisk 1.4 wants GSM:
> 
> chan_iax2.c:9541 socket_process: Rejected connect attempt from
> 192.168.141.8, requested/capability 0x2/0x703 incompatible with our
> capability 0xc.
> 
IAX is a signalling protocol, not a codec. And, interop between the various
branches of Asterisk is not a problem. Looking at your logs, the problem appears
to be you have a codec mismatch between peers, or your authentication details
are wrong. Please also check that you have calltokens set the same on both sides
(enabled on both or disabled on both).

--Tim

Chances are the incoming call is not matching anything in iax.conf.  turn on iax
debug, try a call, post the results.  Maybe someone familiar with IAX can help
you.

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces
at lists.digium.com] On Behalf Of Andres
Sent: Saturday, January 07, 2012 12:20 PM
To: asterisk-users at lists.digium.com
Subject: Re: [asterisk-users] Asterisk 10.0 & 1.4 - iax codec are not
compatible

>
> Error message on asterisk-1.4.39
> chan_iax2.c:9541 socket_process: Rejected connect attempt from 
> 192.168.141.8, requested/capability 0x2/0x703 incompatible with our 
> capability 0xc.
>
>
According to this log, server 192.168.141.8 has codecs defined as 0xc (ulaw and
alaw), which matches your config, but the other end has codecs
0x703 (g723, gsm, g729, speex, ilbc) which does not match your config.  
You should debug and make sure the call setup is choosing the peers you are
expecting in your config.

--
Technical Support
http://www.telesip.net


--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
               http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users