thr3ads.net - Fedora xen - [Fedora-xen] RE: [Xen-ia64-devel] [Fedora-ia64-list] FC6 Test3 Xen test result [Sep 2006]

If this information is useful, please help other people find it:
Share via:

You, Yongkang

2006-Sep-21 05:59 UTC

[Fedora-xen] RE: [Xen-ia64-devel] [Fedora-ia64-list] FC6 Test3 Xen test result

Hi Akio,

Sorry for response late. I just tried with the config you provide (I changed
xenU modprobe.conf and fstab). But unfortunately it still couldn''t
work. XenU booting still report can not find filesystem /dev/root/ and kernel
panic.

Well, after add "ide0=noprobe" etc. xenU won''t complain to
check hda, hdb etc. again. Thanks for this information.

Best Regards,
Yongkang (Kangkang) 永康>-----Original Message-----
>From: Akio Takebe [mailto:takebe_akio@jp.fujitsu.com]
>Sent: 2006年9月21日 10:18
>To: Akio Takebe; You, Yongkang; Yang, Fred; y-oguchi@jp.fujitsu.com;
>fedora-xen@redhat.com
>Cc: xen-ia64-devel@lists.xensource.com
>Subject: RE: [Xen-ia64-devel] [Fedora-ia64-list] FC6 Test3 Xen test result
>
>Hi, Yongkang
>
>I have a small mistake.
>
>Please try the following configuration.
>    kernel = "vmlinuz-2.6.17-1.2630.fc6xen"
>    ramdisk = "initrd-2.6.17-1.2630.fc6xenU.img"
>    memory = 512
>    name = "domU"
>    vif = [ '''' ]
>    disk = [ ''file:/xen/image/fc6.root.img,sda1,w'' ]
<----this
>    root = "/dev/sda1 ro" <--------this
>    extra = "3 ide0=noprobe ide1=noprobe ide2=noprobe
ide3=noprobe" <---
>-this
>
>Best Regards,
>
>Akio Takebe
>
>>Hi, Yongkang
>>
>>I think this issue is configuration mistakes.
>>Can you try the following configuration?
>>I cannot try it because I meet another issue...
>>
>>1. /etc/modprobe.conf for initrd of domU
>>The following configuration would solve the issue of booting domU.
>>    [root@tiger156 xen]# cat /etc/modprobe.conf
>>    #alias eth0 e1000
>>    #alias scsi_hostadapter mptbase
>>    #alias scsi_hostadapter1 mptspi
>>    alias eth0 xennet  <----this
>>    alias scsi_hostadapter xenblk <----and this
>>
>>
>>2. domU.conf
>>The following configuration would solve the issue of probing ide disk.
>>    kernel = "vmlinuz-2.6.17-1.2630.fc6xen"
>>    ramdisk = "initrd-2.6.17-1.2630.fc6xenU.img"
>>    memory = 512
>>    name = "domU"
>>    vif = [ '''' ]
>>    disk = [ ''file:/xen/image/fc6.root.img,hda1,w'' ]
>>    root = "/dev/hda1 ro"
>>    extra = "3 ide0=noprobe ide1=noprobe ide2=noprobe
ide3=noprobe"
><----this
>>
>>
>>Best Regards,
>>
>>Akio Takebe
>>
>>>Hi,
>>>
>>>I have reported 2 bugs to redhat bugzilla:
>>>[Bug 207227] New: Xen0 reboot command can not reboot Tiger4 machine.
>>>[Bug 207241] New: XenU domain can not be created successfully.
>>>New xenU created failure serial log has been pasted to the bug.
>>>
>>>I also notice FC6-test3 Xen0 operation is a little slower, compared
with
>>>RHEL4u3. I assign 2 vcpus to Xen0. When I destroy domains or do some
>heavy
>>>IO operations, Xen0 operations will be blocked for a while. I
didn''t track
>>>this to bugzilla.
>>>
>>>There are also a lot of unaligned accessing from some applications.
They
>>>should be common FC6-test3 issues.
>>>
>>>Sometime Xen0 monitor will print "Bug: soft lockup detected on
CPU#0(or
>#1)"
>>>
>>>Best Regards,
>>>Yongkang (Kangkang) モタソオ
>>>
>>>>-----Original Message-----
>>>>From: xen-ia64-devel-bounces@lists.xensource.com
>>>>[mailto:xen-ia64-devel-bounces@lists.xensource.com] On Behalf Of
You,
>>>>Yongkang
>>>>Sent: 2006トsヤツ20ネユ 10:07
>>>>To: Yang, Fred; y-oguchi@jp.fujitsu.com; fedora-xen@redhat.com
>>>>Cc: xen-ia64-devel@lists.xensource.com
>>>>Subject: RE: [Xen-ia64-devel] [Fedora-ia64-list] FC6 Test3 Xen
test result
>>>>
>>>>Hi Fred & Yoshi,
>>>>
>>>>The former XenU creating failure issue seemed to be the config
issue.
>Now I
>>>>can create XenU. But XenU booting process met an old bug. It
will cost a
>>>>long
>>>>time to check hard disk IRQ response from hda to hdh.
>>>>
>>>>After that, xenU met the problem of mounting root partition to
start
>>>>services,
>>>>and then XenU booting failed (Kill init). I am not sure if it is
because
>>>>initrd issue.
>>>>I will continue to check it.
>>>>
>>>>Best Regards,
>>>>Yongkang (Kangkang) モタソオ
>>>>
>>>>>-----Original Message-----
>>>>>From: xen-ia64-devel-bounces@lists.xensource.com
>>>>>[mailto:xen-ia64-devel-bounces@lists.xensource.com] On
Behalf Of
>Yang,
>>>>>Fred
>>>>>Sent: 2006トsヤツ20ネユ 8:26
>>>>>To: y-oguchi@jp.fujitsu.com; fedora-xen@redhat.com
>>>>>Cc: xen-ia64-devel@lists.xensource.com
>>>>>Subject: RE: [Xen-ia64-devel] [Fedora-ia64-list] FC6 Test3
Xen test
>result
>>>>>
>>>>>Here it comes!
>>>>>-Fred
>>>>>
>>>>>>-----Original Message-----
>>>>>>From: y-oguchi@jp.fujitsu.com
[mailto:y-oguchi@jp.fujitsu.com]
>>>>>>Sent: Tuesday, September 19, 2006 4:23 PM
>>>>>>To: Yang, Fred; fedora-xen@redhat.com
>>>>>>Cc: xen-ia64-devel@lists.xensource.com
>>>>>>Subject: Re: [Xen-ia64-devel] [Fedora-ia64-list] FC6
Test3 Xen test
>>>>>>result
>>>>>>
>>>>>>Fred, Yongkang,
>>>>>>
>>>>>>> Other issues:
>>>>>>> 1) Xen0 operation is a little slower than RHEL4u3.
>>>>>>> 2) XenU creating failure, please see attachment for
the serial output.
>>>>>>
>>>>>>I can''t find the attachment.
>>>>>>Could you repost the serial log?
>>>>>>
>>>>>>Thanks,
>>>>>>Yoshi Oguchi
>>>>>>
>>>>>>"Yang, Fred" <fred.yang@intel.com>
wrote」コ
>>>>>>> Following is the quick Xen test result with FC6
Test3.  We will file
>>>>>>BZ for the issues tonight; the early data is to get
community to fix Xen
>>>>>>issues ASAP
>>>>>>> Thanks,
>>>>>>> -Fred
>>>>>>>
>>>>>>> ===>>>>>>> I have followed
Redhat instructions (FC6-test3 can not be installed
>>>>>>from CDs) to install FC6-Test3 and do some testing. 
Both Xen0 and
>VTI
>>>>>>can all boot up, but XenU couldn''t be created
successfully.
>>>>>>>
>>>>>>> Detailed Items:
>>>>>>> 1.  Using yum to upgrade FC6 Test2 to FC6 Test3   
[almost Pass]
>>>>need
>>>>>>manually reinstall kernel-xen rpm package.
>>>>>>> 2.  Boot Native Linux of FC6 Test3   [Pass]
>>>>>>> 3.  Boot Xen of FC6 Test3   [Pass]
>>>>>>> 4.  xend and xm commands are working.    [Pass]
>>>>>>> 5.  XenU Domain creating failed.     [__FAIL__]
>>>>>>> 6.  Missing VTI guest firmware
(/usr/lib/xen/boot/guest_firmware.bin)
>>>>>>    [__FAIL__ (expected)]
>>>>>>> 7.  After manually copy VTI guest firmware,
creating VTI domain
>>>>>>[Pass]
>>>>>>> 8.    VTI domain with network supported     [Pass]
>>>>>>> 9.    2 VTI domains coexisting testing      [Pass]
>>>>>>> 10.   Linux Kernel build in VTI domain         
[Pass]
>>>>>>> 11.   LTP testing in VTI domain          [Pass]
>>>>>>> 12.   SMP VTI domain          [Pass]
>>>>>>> 13.   SMP Xen0       [Pass]
>>>>>>> 14.   1 VTI Windows 2k3       [Pass] a little
slower.
>>>>>>> 15.   1 VTI Linux + 1 VTI Windows    [__FAIL__ VTI
Windows blue
>>>>>screen]
>>>>>>> 16.  Reboot machine failed with Xen FC6-test3.
[__FAIL__]
>>>>>>>
>>>>>>> Other issues:
>>>>>>> 1) Xen0 operation is a little slower than RHEL4u3.
>>>>>>> 2) XenU creating failure, please see attachment for
the serial output.
>>>>>>>
>>>>>>> Best Regards,
>>>>>>> Yongkang (Kangkang) モタソオ
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> Xen-ia64-devel mailing list
>>>>>>> Xen-ia64-devel@lists.xensource.com
>>>>>>> http://lists.xensource.com/xen-ia64-devel
>>>>
>>>>_______________________________________________
>>>>Xen-ia64-devel mailing list
>>>>Xen-ia64-devel@lists.xensource.com
>>>>http://lists.xensource.com/xen-ia64-devel
>>>
>>>_______________________________________________
>>>Xen-ia64-devel mailing list
>>>Xen-ia64-devel@lists.xensource.com
>>>http://lists.xensource.com/xen-ia64-devel
>>
>>
>>_______________________________________________
>>Xen-ia64-devel mailing list
>>Xen-ia64-devel@lists.xensource.com
>>http://lists.xensource.com/xen-ia64-devel

Akio Takebe

2006-Sep-22 05:05 UTC

head link

[Fedora-xen] RE: [Xen-ia64-devel] [Fedora-ia64-list] FC6 Test3 Xen test result

Hi, Yongkang and all

I can boot up domU by using my special initrd without vif.
I think mkinitrd of fc6 make initrd by using dom0 infomation.
(for example dom0''s /etc/fstab, dom0''s pci infomaition. )
So when xm boot domU, domU kernel don''t use bootparmeter of domU.

The below is a recipe of making my special inird

1. copy initrd
# mkdir tmp
# cp /boot/efi/efi/redhat/initrd-2.6.18-1.2679.fc6xenU.img tmp/

2. expand inird
# cd tmp
# gzip -cd ../initrd-2.6.18-1.2679.fc6xenU.img |cpio -id

3. modify init in initrd
# vi init
	insmod /lib/ohci-hcd.ko 
	echo "Loading ehci-hcd.ko module"
	insmod /lib/ehci-hcd.ko 
	mount -t usbfs /proc/bus/usb /proc/bus/usb
	echo "Loading jbd.ko module"
	insmod /lib/jbd.ko 
	echo "Loading ext3.ko module"
	insmod /lib/ext3.ko 
	#echo "Loading scsi_mod.ko module"           <<<<<<
comment out
	#insmod /lib/scsi_mod.ko                     <<<<<< comment
out
	#echo "Loading sd_mod.ko module"             <<<<<<
comment out
	#insmod /lib/sd_mod.ko                       <<<<<< comment
out
	#echo "Loading scsi_transport_spi.ko module" <<<<<<
comment out
	#insmod /lib/scsi_transport_spi.ko           <<<<<< comment
out
	#echo "Loading mptbase.ko module"            <<<<<<
comment out
	#insmod /lib/mptbase.ko                      <<<<<< comment
out
	#echo "Loading mptscsih.ko module"           <<<<<<
comment out
	#insmod /lib/mptscsih.ko                     <<<<<< comment
out
	#echo "Loading mptspi.ko module"             <<<<<<
comment out
	#insmod /lib/mptspi.ko                       <<<<<< comment
out
	echo "Loading xenblk.ko module"
	insmod /lib/xenblk.ko
	mkblkdevs
	#resume LABEL=SWAP-sda3                      <<<<<< comment
out
	echo Creating root device.
	mkrootdev -t ext3 -o defaults,ro sda1 <<<<change device to sda1
	echo Mounting root filesystem.
	mount /sysroot
	echo Setting up other filesystems.
	setuproot
	echo Switching to new root and running init.
	switchroot
4. make new initrd
# find . -print | cpio --quiet -c -o | gzip -9 >../initrd-new.img

5. my domU configuration
kernel = "/boot/efi/efi/redhat/vmlinuz-2.6.18-1.2679.fc6xen"
ramdisk = "/xen/initrd-new.img"
memory = 1024
name = "fc6.DomU"
#vif = [ '''' ]
disk = [ ''file:/xen/image/fc6.root.img,sda1,w'' ]
root = "/dev/sda1 ro"
extra = "4 ide0=noprobe ide1=noprobe ide2=noprobe ide3=noprobe selinux=0 
rhgb"

6. etc
   6.1. copy modlues into domU image file
        # mount -o loop domU.img /mnt
        # cp -a /lib/modules/2.6.18-1.2679.fc6xen/ /mnt/lib/modules/
   6.2. disable selinux
        # vi /etc/sysconfig/selinux
        SELINUX=disabled <<<< change enforcing to disabled
   6.3. modify /etc/fstab in domU.img
	/dev/sda1     /         ext3    defaults        1 1
	devpts        /dev/pts  devpts  gid=5,mode=620  0 0
	tmpfs         /dev/shm  tmpfs   defaults        0 0
	proc          /proc     proc    defaults        0 0
	sysfs         /sys      sysfs   defaults        0 0


But I cannot use network on domU.
I''ll check the src.rpm of kernel-xen.

Best Regards,

Akio Takebe

>Hi Akio,
>
>Sorry for response late. I just tried with the config you provide (I 
>changed xenU modprobe.conf and fstab). But unfortunately it still
couldn''t
>work. XenU booting still report can not find filesystem /dev/root/ and 
>kernel panic. 
>
>Well, after add "ide0=noprobe" etc. xenU won''t complain
to check hda, hdb
>etc. again. Thanks for this information. 
>
>Best Regards,
>Yongkang (Kangkang) モタソオ
>>-----Original Message-----
>>From: Akio Takebe [mailto:takebe_akio@jp.fujitsu.com]
>>Sent: 2006トヤツ21ネユ 10:18
>>To: Akio Takebe; You, Yongkang; Yang, Fred; y-oguchi@jp.fujitsu.com;
>>fedora-xen@redhat.com
>>Cc: xen-ia64-devel@lists.xensource.com
>>Subject: RE: [Xen-ia64-devel] [Fedora-ia64-list] FC6 Test3 Xen test
result
>>
>>Hi, Yongkang
>>
>>I have a small mistake.
>>
>>Please try the following configuration.
>>    kernel = "vmlinuz-2.6.17-1.2630.fc6xen"
>>    ramdisk = "initrd-2.6.17-1.2630.fc6xenU.img"
>>    memory = 512
>>    name = "domU"
>>    vif = [ '''' ]
>>    disk = [ ''file:/xen/image/fc6.root.img,sda1,w'' ]
<----this
>>    root = "/dev/sda1 ro" <--------this
>>    extra = "3 ide0=noprobe ide1=noprobe ide2=noprobe
ide3=noprobe" <---
>>-this
>>
>>Best Regards,
>>
>>Akio Takebe
>>
>>>Hi, Yongkang
>>>
>>>I think this issue is configuration mistakes.
>>>Can you try the following configuration?
>>>I cannot try it because I meet another issue...
>>>
>>>1. /etc/modprobe.conf for initrd of domU
>>>The following configuration would solve the issue of booting domU.
>>>    [root@tiger156 xen]# cat /etc/modprobe.conf
>>>    #alias eth0 e1000
>>>    #alias scsi_hostadapter mptbase
>>>    #alias scsi_hostadapter1 mptspi
>>>    alias eth0 xennet  <----this
>>>    alias scsi_hostadapter xenblk <----and this
>>>
>>>
>>>2. domU.conf
>>>The following configuration would solve the issue of probing ide
disk.
>>>    kernel = "vmlinuz-2.6.17-1.2630.fc6xen"
>>>    ramdisk = "initrd-2.6.17-1.2630.fc6xenU.img"
>>>    memory = 512
>>>    name = "domU"
>>>    vif = [ '''' ]
>>>    disk = [ ''file:/xen/image/fc6.root.img,hda1,w''
]
>>>    root = "/dev/hda1 ro"
>>>    extra = "3 ide0=noprobe ide1=noprobe ide2=noprobe
ide3=noprobe"
>><----this
>>>
>>>
>>>Best Regards,
>>>
>>>Akio Takebe
>>>
>>>>Hi,
>>>>
>>>>I have reported 2 bugs to redhat bugzilla:
>>>>[Bug 207227] New: Xen0 reboot command can not reboot Tiger4
machine.
>>>>[Bug 207241] New: XenU domain can not be created successfully.
>>>>New xenU created failure serial log has been pasted to the bug.
>>>>
>>>>I also notice FC6-test3 Xen0 operation is a little slower,
compared with
>>>>RHEL4u3. I assign 2 vcpus to Xen0. When I destroy domains or do
some
>>heavy
>>>>IO operations, Xen0 operations will be blocked for a while. I
didn''t track
>>>>this to bugzilla.
>>>>
>>>>There are also a lot of unaligned accessing from some
applications. They
>>>>should be common FC6-test3 issues.
>>>>
>>>>Sometime Xen0 monitor will print "Bug: soft lockup detected
on CPU#0(or
>>#1)"
>>>>
>>>>Best Regards,
>>>>Yongkang (Kangkang) ・筵Д宗Ε后ΕЁ
>>>>
>>>>>-----Original Message-----
>>>>>From: xen-ia64-devel-bounces@lists.xensource.com
>>>>>[mailto:xen-ia64-devel-bounces@lists.xensource.com] On
Behalf Of You,
>>>>>Yongkang
>>>>>Sent: 2006・ネs・茹Д20・ヘ・10:07
>>>>>To: Yang, Fred; y-oguchi@jp.fujitsu.com;
fedora-xen@redhat.com
>>>>>Cc: xen-ia64-devel@lists.xensource.com
>>>>>Subject: RE: [Xen-ia64-devel] [Fedora-ia64-list] FC6 Test3
Xen test
>>>>>result
>>>>>
>>>>>Hi Fred & Yoshi,
>>>>>
>>>>>The former XenU creating failure issue seemed to be the
config issue.
>>Now I
>>>>>can create XenU. But XenU booting process met an old bug. It
will cost a
>>>>>long
>>>>>time to check hard disk IRQ response from hda to hdh.
>>>>>
>>>>>After that, xenU met the problem of mounting root partition
to start
>>>>>services,
>>>>>and then XenU booting failed (Kill init). I am not sure if
it is because
>>>>>initrd issue.
>>>>>I will continue to check it.
>>>>>
>>>>>Best Regards,
>>>>>Yongkang (Kangkang) ・筵Д宗Ε后ΕЁ
>>>>>
>>>>>>-----Original Message-----
>>>>>>From: xen-ia64-devel-bounces@lists.xensource.com
>>>>>>[mailto:xen-ia64-devel-bounces@lists.xensource.com] On
Behalf Of
>>Yang,
>>>>>>Fred
>>>>>>Sent: 2006・ネs・茹Д20・ヘ・8:26
>>>>>>To: y-oguchi@jp.fujitsu.com; fedora-xen@redhat.com
>>>>>>Cc: xen-ia64-devel@lists.xensource.com
>>>>>>Subject: RE: [Xen-ia64-devel] [Fedora-ia64-list] FC6
Test3 Xen test
>>result
>>>>>>
>>>>>>Here it comes!
>>>>>>-Fred
>>>>>>
>>>>>>>-----Original Message-----
>>>>>>>From: y-oguchi@jp.fujitsu.com
[mailto:y-oguchi@jp.fujitsu.com]
>>>>>>>Sent: Tuesday, September 19, 2006 4:23 PM
>>>>>>>To: Yang, Fred; fedora-xen@redhat.com
>>>>>>>Cc: xen-ia64-devel@lists.xensource.com
>>>>>>>Subject: Re: [Xen-ia64-devel] [Fedora-ia64-list] FC6
Test3 Xen test
>>>>>>>result
>>>>>>>
>>>>>>>Fred, Yongkang,
>>>>>>>
>>>>>>>> Other issues:
>>>>>>>> 1) Xen0 operation is a little slower than
RHEL4u3.
>>>>>>>> 2) XenU creating failure, please see attachment
for the serial
>>>>>>>> output.
>>>>>>>
>>>>>>>I can''t find the attachment.
>>>>>>>Could you repost the serial log?
>>>>>>>
>>>>>>>Thanks,
>>>>>>>Yoshi Oguchi
>>>>>>>
>>>>>>>"Yang, Fred" <fred.yang@intel.com>
wrote。ケ・ウ
>>>>>>>> Following is the quick Xen test result with FC6
Test3.  We will file
>>>>>>>BZ for the issues tonight; the early data is to get
community to fix
>>>>>>>Xen
>>>>>>>issues ASAP
>>>>>>>> Thanks,
>>>>>>>> -Fred
>>>>>>>>
>>>>>>>> ===>>>>>>>> I have
followed Redhat instructions (FC6-test3 can not be installed
>>>>>>>from CDs) to install FC6-Test3 and do some testing. 
Both Xen0 and
>>VTI
>>>>>>>can all boot up, but XenU couldn''t be
created successfully.
>>>>>>>>
>>>>>>>> Detailed Items:
>>>>>>>> 1.  Using yum to upgrade FC6 Test2 to FC6 Test3
[almost Pass]
>>>>>need
>>>>>>>manually reinstall kernel-xen rpm package.
>>>>>>>> 2.  Boot Native Linux of FC6 Test3   [Pass]
>>>>>>>> 3.  Boot Xen of FC6 Test3   [Pass]
>>>>>>>> 4.  xend and xm commands are working.    [Pass]
>>>>>>>> 5.  XenU Domain creating failed.     [__FAIL__]
>>>>>>>> 6.  Missing VTI guest firmware
(/usr/lib/xen/boot/guest_firmware.bin)
>>>>>>>    [__FAIL__ (expected)]
>>>>>>>> 7.  After manually copy VTI guest firmware,
creating VTI domain
>>>>>>>[Pass]
>>>>>>>> 8.    VTI domain with network supported    
[Pass]
>>>>>>>> 9.    2 VTI domains coexisting testing     
[Pass]
>>>>>>>> 10.   Linux Kernel build in VTI domain         
[Pass]
>>>>>>>> 11.   LTP testing in VTI domain          [Pass]
>>>>>>>> 12.   SMP VTI domain          [Pass]
>>>>>>>> 13.   SMP Xen0       [Pass]
>>>>>>>> 14.   1 VTI Windows 2k3       [Pass] a little
slower.
>>>>>>>> 15.   1 VTI Linux + 1 VTI Windows    [__FAIL__
VTI Windows blue
>>>>>>screen]
>>>>>>>> 16.  Reboot machine failed with Xen FC6-test3.
[__FAIL__]
>>>>>>>>
>>>>>>>> Other issues:
>>>>>>>> 1) Xen0 operation is a little slower than
RHEL4u3.
>>>>>>>> 2) XenU creating failure, please see attachment
for the serial
>>>>>>>> output.
>>>>>>>>
>>>>>>>> Best Regards,
>>>>>>>> Yongkang (Kangkang) ・筵Д宗Ε后ΕЁ
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> Xen-ia64-devel mailing list
>>>>>>>> Xen-ia64-devel@lists.xensource.com
>>>>>>>> http://lists.xensource.com/xen-ia64-devel
>>>>>
>>>>>_______________________________________________
>>>>>Xen-ia64-devel mailing list
>>>>>Xen-ia64-devel@lists.xensource.com
>>>>>http://lists.xensource.com/xen-ia64-devel
>>>>
>>>>_______________________________________________
>>>>Xen-ia64-devel mailing list
>>>>Xen-ia64-devel@lists.xensource.com
>>>>http://lists.xensource.com/xen-ia64-devel
>>>
>>>
>>>_______________________________________________
>>>Xen-ia64-devel mailing list
>>>Xen-ia64-devel@lists.xensource.com
>>>http://lists.xensource.com/xen-ia64-devel

Fedora xen - Sep 2006 - RE: [Xen-ia64-devel] [Fedora-ia64-list] FC6 Test3 Xen test result

[Fedora-xen] RE: [Xen-ia64-devel] [Fedora-ia64-list] FC6 Test3 Xen test result

[Fedora-xen] RE: [Xen-ia64-devel] [Fedora-ia64-list] FC6 Test3 Xen test result