Does anybody please have any experience with
the following CentOS 6 warnings in logwatch?
WARNING: Kernel Errors Present
ACPI Error (psargs-0359): [ ...: 1 Time(s)
pci 0000:00:01.0: PCIe errors handled by OS. ...: 1 Time(s)
pci 0000:00:1c.0: PCIe errors handled by OS. ...: 1 Time(s)
pci 0000:00:1c.5: PCIe errors handled by OS. ...: 1 Time(s)
pci 0000:00:1c.6: PCIe errors handled by OS. ...: 1 Time(s)
pci 0000:00:1c.7: PCIe errors handled by OS. ...: 1 Time(s)
The /var/log/mcelog is empty.
The dmesg output is below:
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-131.17.1.el6.x86_64
(mockbuild at c6b5.bsys.dev.centos.org) (gcc version 4.4.5 20110214 (Red
Hat 4.4.5-6) (GCC) ) #1 SMP Thu Oct 6 19:24:09 BST 2011
Command line: ro root=/dev/md2 crashkernel=auto
SYSFONT=latarcyrheb-sun16 LANG=en_US.UTF-8 KEYTABLE=de
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
BIOS-e820: 0000000020200000 - 0000000040000000 (usable)
BIOS-e820: 0000000040000000 - 0000000040200000 (reserved)
BIOS-e820: 0000000040200000 - 00000000bac15000 (usable)
BIOS-e820: 00000000bac15000 - 00000000bac71000 (ACPI NVS)
BIOS-e820: 00000000bac71000 - 00000000bada4000 (reserved)
BIOS-e820: 00000000bada4000 - 00000000badb5000 (ACPI NVS)
BIOS-e820: 00000000badb5000 - 00000000badcc000 (reserved)
BIOS-e820: 00000000badcc000 - 00000000badce000 (usable)
BIOS-e820: 00000000badce000 - 00000000badd6000 (reserved)
BIOS-e820: 00000000badd6000 - 00000000bade0000 (ACPI NVS)
BIOS-e820: 00000000bade0000 - 00000000bae3a000 (reserved)
BIOS-e820: 00000000bae3a000 - 00000000bae7d000 (ACPI NVS)
BIOS-e820: 00000000bae7d000 - 00000000bb000000 (usable)
BIOS-e820: 00000000bb800000 - 00000000bfa00000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000043fe00000 (usable)
DMI 2.6 present.
SMBIOS version 2.6 @ 0xF0450
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==>
(reserved)
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==>
(reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x43fe00 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask C00000000 write-back
1 base 400000000 mask FC0000000 write-back
2 base 0BB800000 mask FFF800000 uncachable
3 base 0BC000000 mask FFC000000 uncachable
4 base 0C0000000 mask FC0000000 uncachable
5 base 43FE00000 mask FFFE00000 uncachable
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 16GB, type WB
reg 1, base: 16GB, range: 1GB, type WB
reg 2, base: 3000MB, range: 8MB, type UC
reg 3, base: 3008MB, range: 64MB, type UC
reg 4, base: 3GB, range: 1GB, type UC
reg 5, base: 17406MB, range: 2MB, type UC
total RAM covered: 16310M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 128M num_reg: 8 lose
cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3000MB, range: 8MB, type UC
reg 3, base: 3008MB, range: 64MB, type UC
reg 4, base: 4GB, range: 4GB, type WB
reg 5, base: 8GB, range: 8GB, type WB
reg 6, base: 16GB, range: 1GB, type WB
reg 7, base: 17406MB, range: 2MB, type UC
e820 update range: 00000000bb800000 - 0000000100000000 (usable) ==>
(reserved)
last_pfn = 0xbb000 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000bb000000
0000000000 - 00bb000000 page 2M
kernel direct mapping tables up to bb000000 @ 10000-14000
init_memory_mapping: 0000000100000000-000000043fe00000
0100000000 - 043fe00000 page 2M
kernel direct mapping tables up to 43fe00000 @ 12000-24000
RAMDISK: 1f39c000 - 1ffef811
ACPI: RSDP 00000000000f0420 00024 (v02 ALASKA)
ACPI: XSDT 00000000bac63068 0004C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000bac6cfa0 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 00000000bac63140 09E5F (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 00000000badd7f80 00040
ACPI: APIC 00000000bac6d098 00092 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 00000000bac6d130 001D6 (v01 AMICPU PROC 00000001 MSFT 03000001)
ACPI: MCFG 00000000bac6d308 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 00000000bac6d348 00038 (v01 ALASKA A M I 01072009 AMI. 00000004)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-000000043fe00000
Bootmem setup node 0 0000000000000000-000000043fe00000
NODE_DATA [000000000001f000 - 0000000000052fff]
bootmap [0000000000100000 - 0000000000187fbf] pages 88
(8 early reservations) ==> bootmem [0000000000 - 043fe00000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 0002007524] TEXT DATA BSS ==> [0001000000 - 0002007524]
#3 [001f39c000 - 001ffef811] RAMDISK ==> [001f39c000 - 001ffef811]
#4 [000009d800 - 0000100000] BIOS reserved ==> [000009d800 - 0000100000]
#5 [0002008000 - 000200834e] BRK ==> [0002008000 - 000200834e]
#6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
#7 [0000012000 - 000001f000] PGTABLE ==> [0000012000 - 000001f000]
found SMP MP-table at [ffff8800000fcd90] fcd90
Reserving 129MB of memory at 48MB for crashkernel (System RAM: 17406MB)
[ffffea0000000000-ffffea000edfffff] PMD ->
[ffff88002c600000-ffff88003a5fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x0043fe00
Movable zone start PFN for each node
early_node_map[7] active PFN ranges
0: 0x00000010 -> 0x0000009d
0: 0x00000100 -> 0x00020000
0: 0x00020200 -> 0x00040000
0: 0x00040200 -> 0x000bac15
0: 0x000badcc -> 0x000badce
0: 0x000bae7d -> 0x000bb000
0: 0x00100000 -> 0x0043fe00
On node 0 totalpages: 4171559
DMA zone: 56 pages used for memmap
DMA zone: 116 pages reserved
DMA zone: 3809 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 745938 pages, LIFO batch:31
Normal zone: 46585 pages used for memmap
Normal zone: 3360775 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 0000000020000000 - 0000000020200000
PM: Registered nosave memory: 0000000040000000 - 0000000040200000
PM: Registered nosave memory: 00000000bac15000 - 00000000bac71000
PM: Registered nosave memory: 00000000bac71000 - 00000000bada4000
PM: Registered nosave memory: 00000000bada4000 - 00000000badb5000
PM: Registered nosave memory: 00000000badb5000 - 00000000badcc000
PM: Registered nosave memory: 00000000badce000 - 00000000badd6000
PM: Registered nosave memory: 00000000badd6000 - 00000000bade0000
PM: Registered nosave memory: 00000000bade0000 - 00000000bae3a000
PM: Registered nosave memory: 00000000bae3a000 - 00000000bae7d000
PM: Registered nosave memory: 00000000bb000000 - 00000000bb800000
PM: Registered nosave memory: 00000000bb800000 - 00000000bfa00000
PM: Registered nosave memory: 00000000bfa00000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
Allocating PCI resources starting at bfa00000 (gap: bfa00000:3f31c000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 30 pages/cpu @ffff88002c200000 s92504 r8192 d22184 u262144
pcpu-alloc: s92504 r8192 d22184 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4110522
Policy zone: Normal
Kernel command line: ro root=/dev/md2 crashkernel=129M at 0M
SYSFONT=latarcyrheb-sun16 LANG=en_US.UTF-8 KEYTABLE=de
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
AMD-Vi disabled by default: pass amd_iommu=on to enable
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880024000000 - ffff880028000000
software IO TLB at phys 0x24000000 - 0x28000000
Memory: 16228152k/17823744k available (5013k kernel code, 1137508k
absent, 458084k reserved, 7291k data, 1232k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:472
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 167772160 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory
cgroups
hpet clockevent registered
alloc irq_desc for 24 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 25 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 26 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 27 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 28 on node 0
alloc kstat_irqs on node 0
HPET: 8 timers in total, 5 timers will be used for per-cpu timer
Fast TSC calibration using PIT
Detected 3411.853 MHz processor.
Calibrating delay loop (skipped), value calculated using timer
frequency.. 6823.70 BogoMIPS (lpj=3411853)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 20705 entries in 82 pages
Not enabling x2apic, Intr-remapping init failed.
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz stepping 07
Performance Events: PEBS fmt1+, generic architected perfmon, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 Ok.
Brought up 8 CPUs
Total of 8 processors activated (54583.90 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2616 bytes
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63
PCI: Not using MMCONFIG.
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI Error (psargs-0359): [RAMB] Namespace lookup failure, AE_NOT_FOUND
ACPI Exception: AE_NOT_FOUND, Could not execute arguments for [RAMW]
(Region) (20090903/nsinit-347)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG at e0000000 - e3ffffff
ACPI: BIOS _OSI(Linux) query ignored
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:02.0: reg 10 64bit mmio: [0xfe000000-0xfe3fffff]
pci 0000:00:02.0: reg 18 64bit mmio pref: [0xc0000000-0xcfffffff]
pci 0000:00:02.0: reg 20 io port: [0xf000-0xf03f]
pci 0000:00:16.0: reg 10 64bit mmio: [0xfe504000-0xfe50400f]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:00:1a.0: reg 10 32bit mmio: [0xfe503000-0xfe5033ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: PME# disabled
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: PME# disabled
pci 0000:00:1d.0: reg 10 32bit mmio: [0xfe502000-0xfe5023ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1f.2: reg 10 io port: [0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 14 io port: [0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 18 io port: [0xf090-0xf097]
pci 0000:00:1f.2: reg 1c io port: [0xf080-0xf083]
pci 0000:00:1f.2: reg 20 io port: [0xf060-0xf07f]
pci 0000:00:1f.2: reg 24 32bit mmio: [0xfe501000-0xfe5017ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 64bit mmio: [0xfe500000-0xfe5000ff]
pci 0000:00:1f.3: reg 20 io port: [0xf040-0xf05f]
pci 0000:03:00.0: reg 10 64bit mmio: [0xfe400000-0xfe407fff]
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.5: bridge 32bit mmio: [0xfe400000-0xfe4fffff]
pci 0000:04:00.0: reg 10 io port: [0xe000-0xe0ff]
pci 0000:04:00.0: reg 18 64bit mmio pref: [0xd0004000-0xd0004fff]
pci 0000:04:00.0: reg 20 64bit mmio pref: [0xd0000000-0xd0003fff]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:00:1c.6: bridge io port: [0xe000-0xefff]
pci 0000:00:1c.6: bridge 64bit mmio pref: [0xd0000000-0xd00fffff]
pci 0000:00:1c.7: transparent bridge
pci 0000:05:00.0: transparent bridge
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7.BR19._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
HEST: Table is not found!
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 28, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
hpet: hpet2 irq 24 for MSI
hpet: hpet3 irq 25 for MSI
hpet: hpet4 irq 26 for MSI
hpet: hpet5 irq 27 for MSI
hpet: hpet6 irq 28 for MSI
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: iomem range 0xfed10000-0xfed19fff has been reserved
system 00:01: iomem range 0xe0000000-0xe3ffffff has been reserved
system 00:01: iomem range 0xfed90000-0xfed93fff has been reserved
system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:01: iomem range 0xfee00000-0xfee0ffff has been reserved
system 00:02: ioport range 0x290-0x29f has been reserved
system 00:06: ioport range 0x4d0-0x4d1 has been reserved
system 00:09: ioport range 0x400-0x453 has been reserved
system 00:09: ioport range 0x458-0x47f has been reserved
system 00:09: ioport range 0x500-0x57f has been reserved
system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:09: iomem range 0xfec00000-0xfecfffff could not be reserved
system 00:09: iomem range 0xfed08000-0xfed08fff has been reserved
system 00:09: iomem range 0xff000000-0xffffffff has been reserved
system 00:0a: ioport range 0x454-0x457 has been reserved
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: bridge window [io disabled]
pci 0000:00:01.0: bridge window [mem disabled]
pci 0000:00:01.0: bridge window [mem pref disabled]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0: bridge window [io disabled]
pci 0000:00:1c.0: bridge window [mem disabled]
pci 0000:00:1c.0: bridge window [mem pref disabled]
pci 0000:00:1c.5: PCI bridge to [bus 03-03]
pci 0000:00:1c.5: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.5: bridge window [io disabled]
pci 0000:00:1c.5: bridge window [0xfe400000-0xfe4fffff]
pci 0000:00:1c.5: bridge window [mem pref disabled]
pci 0000:00:1c.6: PCI bridge to [bus 04-04]
pci 0000:00:1c.6: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.6: bridge window [0xe000-0xefff]
pci 0000:00:1c.6: bridge window [mem disabled]
pci 0000:00:1c.6: bridge window [0xd0000000-0xd00fffff]
pci 0000:05:00.0: PCI bridge to [bus 06-06]
pci 0000:05:00.0: PCI bridge, secondary bus 0000:06
pci 0000:05:00.0: bridge window [io disabled]
pci 0000:05:00.0: bridge window [mem disabled]
pci 0000:05:00.0: bridge window [mem pref disabled]
pci 0000:00:1c.7: PCI bridge to [bus 05-06]
pci 0000:00:1c.7: PCI bridge, secondary bus 0000:05
pci 0000:00:1c.7: bridge window [io disabled]
pci 0000:00:1c.7: bridge window [mem disabled]
pci 0000:00:1c.7: bridge window [mem pref disabled]
pci 0000:00:01.0: PCIe errors handled by OS.
pci 0000:00:01.0: ACPI _OSC control granted for 0x1c
alloc irq_desc for 16 on node -1
alloc kstat_irqs on node -1
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCIe errors handled by OS.
pci 0000:00:1c.0: ACPI _OSC control granted for 0x1c
alloc irq_desc for 17 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.5: PCIe errors handled by OS.
pci 0000:00:1c.5: ACPI _OSC control granted for 0x1c
pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1c.6: PCIe errors handled by OS.
pci 0000:00:1c.6: ACPI _OSC control granted for 0x1c
alloc irq_desc for 18 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.6: setting latency timer to 64
pci 0000:00:1c.7: PCIe errors handled by OS.
pci 0000:00:1c.7: ACPI _OSC control granted for 0x1c
alloc irq_desc for 19 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.7: setting latency timer to 64
pci 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:05:00.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:03: resource 1 mem: [0xfe400000-0xfe4fffff]
pci_bus 0000:04: resource 0 io: [0xe000-0xefff]
pci_bus 0000:04: resource 2 pref mem [0xd0000000-0xd00fffff]
pci_bus 0000:05: resource 3 io: [0x00-0xffff]
pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:06: resource 6 io: [0x00-0xffff]
pci_bus 0000:06: resource 7 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 12622k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1319544327.943:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 31720
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key 975E3587F32C7D2F
- User ID: CentOS (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
alloc irq_desc for 29 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:01.0: irq 29 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 30 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.0: irq 30 for MSI/MSI-X
pcieport 0000:00:1c.5: setting latency timer to 64
alloc irq_desc for 31 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.5: irq 31 for MSI/MSI-X
pcieport 0000:00:1c.6: setting latency timer to 64
alloc irq_desc for 32 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.6: irq 32 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
pci-stub: invalid id string ""
intel_idle: MWAIT substates: 0x1120
intel_idle: does not run on family 6 model 42
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
ACPI: SSDT 00000000baddf898 006F4 (v01 AMI IST 00000001 MSFT 03000001)
ACPI: SSDT 00000000badd6d98 000E4 (v01 AMI CST 00000001 MSFT 03000001)
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
processor LNXCPU:00: registered as cooling_device0
processor LNXCPU:01: registered as cooling_device1
processor LNXCPU:02: registered as cooling_device2
processor LNXCPU:03: registered as cooling_device3
processor LNXCPU:04: registered as cooling_device4
processor LNXCPU:05: registered as cooling_device5
processor LNXCPU:06: registered as cooling_device6
processor LNXCPU:07: registered as cooling_device7
ERST: Table is not found!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 65536K stolen memory, trimming to 32768K
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
crash memory driver: version 1.1
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input2
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
alloc irq_desc for 23 on node -1
alloc kstat_irqs on node -1
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 23, io mem 0xfe503000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-131.17.1.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfe502000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-131.17.1.el6.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect
please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:04: setting system clock to 2011-10-25 12:05:29 UTC (1319544329)
Initalizing network drop monitor service
Freeing unused kernel memory: 1232k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 1112k freed
Freeing unused kernel memory: 1796k freed
dracut: dracut-004-53.el6
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.20.6-ioctl (2011-02-02) initialised: dm-devel at
redhat.com
udev: starting version 147
input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input3
[drm] Initialized drm 1.1.0 20060810
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
alloc irq_desc for 33 on node -1
alloc kstat_irqs on node -1
i915 0000:00:02.0: irq 33 for MSI/MSI-X
vgaarb: device changed decodes:
PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
No connectors reported connected with modes
[drm] Cannot find any crtc or sizes - going 1024x768
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 128x48
fb0: inteldrmfb frame buffer device
drm: registered panic notifier
Slow work thread pool: Starting up
Slow work thread pool: Ready
[drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
[drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
acpi device:32: registered as cooling_device8
input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
dracut: Starting plymouth daemon
usb 1-1: new high speed USB device using ehci_hcd and address 2
ahci 0000:00:1f.2: version 3.0
alloc irq_desc for 20 on node -1
alloc kstat_irqs on node -1
ahci 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
alloc irq_desc for 34 on node -1
alloc kstat_irqs on node -1
ahci 0000:00:1f.2: irq 34 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048 at 0xfe501000 port 0xfe501100 irq 34
ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 34
ata3: DUMMY
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high speed USB device using ehci_hcd and address 2
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1: configuration #1 chosen from 1 choice
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-8: ST33000651AS, CC44, max UDMA/133
ata1.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST33000651AS CC44 PQ: 0 ANSI: 5
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ATA-8: ST33000651AS, CC44, max UDMA/133
ata2.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA ST33000651AS CC44 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
sd 0:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sdb:
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
sdb1 sdb2 sdb3
sd 1:0:0:0: [sdb] Attached SCSI disk
dracut: Autoassembling MD Raid
md: md0 stopped.
md: bind<sdb1>
md: bind<sda1>
md: raid1 personality registered for level 1
bio: create slab <bio-1> at 1
md/raid1:md0: active with 2 out of 2 mirrors
md0: detected capacity change from 0 to 2146369536
dracut: mdadm: /dev/md0 has been started with 2 drives.
md0:
md: md1 stopped.
md: bind<sdb2>
unknown partition table
md: bind<sda2>
md/raid1:md1: active with 2 out of 2 mirrors
md1: detected capacity change from 0 to 536805376
dracut: mdadm: /dev/md1 has been started with 2 drives.
md1: unknown partition table
md: md2 stopped.
md: bind<sdb3>
md: bind<sda3>
md/raid1:md2: active with 2 out of 2 mirrors
md2: detected capacity change from 0 to 2195265093632
dracut: mdadm: /dev/md2 has been started with 2 drives.
md2: unknown partition table
dracut: Autoassembling MD Raid
kjournald starting. Commit interval 5 seconds
EXT3-fs (md2): mounted filesystem with ordered data mode
dracut: Mounted root filesystem /dev/md2
dracut: Loading SELinux policy
SELinux: 2048 avtab hash slots, 212877 rules.
SELinux: 2048 avtab hash slots, 212877 rules.
SELinux: 9 users, 13 roles, 3431 types, 178 bools, 1 sens, 1024 cats
SELinux: 81 classes, 212877 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev md2, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1319544331.974:2): policy loaded auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
udev: starting version 147
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
r8169 0000:04:00.0: setting latency timer to 64
r8169 0000:04:00.0: unknown MAC, using family default
alloc irq_desc for 35 on node -1
alloc kstat_irqs on node -1
r8169 0000:04:00.0: irq 35 for MSI/MSI-X
eth0: RTL8168b/8111b at 0xffffc900065e8000, 14:da:e9:b3:99:b9, XID
0c200000 IRQ 35
xhci_hcd 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
xhci_hcd 0000:03:00.0: setting latency timer to 64
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:03:00.0: irq 17, io mem 0xfe400000
alloc irq_desc for 36 on node -1
alloc kstat_irqs on node -1
xhci_hcd 0000:03:00.0: irq 36 for MSI/MSI-X
alloc irq_desc for 37 on node -1
alloc kstat_irqs on node -1
xhci_hcd 0000:03:00.0: irq 37 for MSI/MSI-X
alloc irq_desc for 38 on node -1
alloc kstat_irqs on node -1
xhci_hcd 0000:03:00.0: irq 38 for MSI/MSI-X
alloc irq_desc for 39 on node -1
alloc kstat_irqs on node -1
xhci_hcd 0000:03:00.0: irq 39 for MSI/MSI-X
alloc irq_desc for 40 on node -1
alloc kstat_irqs on node -1
xhci_hcd 0000:03:00.0: irq 40 for MSI/MSI-X
alloc irq_desc for 41 on node -1
alloc kstat_irqs on node -1
xhci_hcd 0000:03:00.0: irq 41 for MSI/MSI-X
alloc irq_desc for 42 on node -1
alloc kstat_irqs on node -1
xhci_hcd 0000:03:00.0: irq 42 for MSI/MSI-X
alloc irq_desc for 43 on node -1
alloc kstat_irqs on node -1
xhci_hcd 0000:03:00.0: irq 43 for MSI/MSI-X
usb usb3: config 1 interface 0 altsetting 0 endpoint 0x81 has no
SuperSpeed companion descriptor
usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-131.17.1.el6.x86_64 xhci_hcd
usb usb3: SerialNumber: 0000:03:00.0
usb usb3: configuration #1 chosen from 1 choice
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
EXT3-fs (md2): using internal journal
kjournald starting. Commit interval 5 seconds
EXT3-fs (md1): using internal journal
EXT3-fs (md1): mounted filesystem with ordered data mode
SELinux: initialized (dev md1, type ext3), uses xattr
Adding 2096056k swap on /dev/md0. Priority:-1 extents:1 across:2096056k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
r8169: eth0: link down
r8169: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:04:00.0: eth0: link up
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
[drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
TCP: Peer 0000:0000:0000:0000:0000:ffff:d426:7e96:60683/80
unexpectedly shrunk window 2382943400:2382943401 (repaired)
[drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
[drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
