I just installed centos 5.5 x86_64 on a new HP laptop. It has the core i5 processor. only 1 cpu is detected should be 2. This has happened before. Is upstream not keeping up with new processors released and updating the kernel? I'd rather not go through the process again of putting a newer kernel on the machine and having something different out there than "stock" centos. Jerry
Peter Kjellstrom
2010-Jun-18 14:19 UTC
[CentOS] recognizing correct number of cores on CPU
On Friday 18 June 2010, Jerry Geis wrote:> I just installed centos 5.5 x86_64 on a new HP laptop. > It has the core i5 processor. > > only 1 cpu is detected should be 2. > > This has happened before. Is upstream not keeping up with > new processors released and updating the kernel?I've used the stock CentOS kernel with even unreleased CPUs, there is no general need for CPU to be supported. Maybe this is a bios problem. More information would also be nice (like dmesg output). /Peter> I'd rather not go through the process again of putting a newer kernel > on the machine and having something different out there than "stock" > centos. > > Jerry-------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: This is a digitally signed message part. URL: <http://lists.centos.org/pipermail/centos/attachments/20100618/f02d17bc/attachment-0001.sig>
-----Original Message----- From: centos-bounces at centos.org [mailto:centos-bounces at centos.org] On Behalf Of Peter Kjellstrom Sent: Friday, June 18, 2010 9:19 AM To: centos at centos.org Cc: Jerry Geis Subject: Re: [CentOS] recognizing correct number of cores on CPU On Friday 18 June 2010, Jerry Geis wrote:> I just installed centos 5.5 x86_64 on a new HP laptop. > It has the core i5 processor. > > only 1 cpu is detected should be 2. > > This has happened before. Is upstream not keeping up with new > processors released and updating the kernel?I've used the stock CentOS kernel with even unreleased CPUs, there is no general need for CPU to be supported. Maybe this is a bios problem. More information would also be nice (like dmesg output). /Peter> I'd rather not go through the process again of putting a newer kernel > on the machine and having something different out there than "stock" > centos. > > Jerry
Peter Kjellstrom wrote:> On Friday 18 June 2010, Jerry Geis wrote: > >> I just installed centos 5.5 x86_64 on a new HP laptop. >> It has the core i5 processor. >> >> only 1 cpu is detected should be 2. >> >> This has happened before. Is upstream not keeping up with >> new processors released and updating the kernel? >> > > I've used the stock CentOS kernel with even unreleased CPUs, there is no > general need for CPU to be supported. > > Maybe this is a bios problem. > > More information would also be nice (like dmesg output). > > /Peter > > >> I'd rather not go through the process again of putting a newer kernel >> on the machine and having something different out there than "stock" >> centos. >> >> Jerry >>more /proc/cpuinfo is showing: more /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 37 model name : Intel(R) Core(TM) i5 CPU M 430 @ 2.27GHz stepping : 2 cpu MHz : 2261.291 cache size : 3072 KB physical id : 0 siblings : 1 core id : 0 cpu cores : 1 apicid : 0 fpu : yes fpu_exception : yes cpuid level : 11 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall nx rdtscp lm constant_tsc up ida nonstop_tsc arat pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr sse4_1 sse4_2 popcnt lahf_lm bogomips : 4522.58 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: [8] dmesg is : Linux version 2.6.18-194.3.1.el5 (mockbuild at builder10.centos.org) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) #1 SMP Thu May 13 13:08:30 EDT 2010 Command line: ro root=LABEL=/ rhgb quiet noapic acpi=off apci=off BIOS-provided physical RAM map: BIOS-e820: 0000000000010000 - 000000000009d000 (usable) BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bf63f000 (usable) BIOS-e820: 00000000bf63f000 - 00000000bf6bf000 (reserved) BIOS-e820: 00000000bf6bf000 - 00000000bf7bf000 (ACPI NVS) BIOS-e820: 00000000bf7bf000 - 00000000bf7ff000 (ACPI data) BIOS-e820: 00000000bf7ff000 - 00000000bf800000 (usable) BIOS-e820: 00000000bf800000 - 00000000c0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000feb00000 - 00000000feb04000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved) BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1b000 - 00000000fed20000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffe80000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 000000013c000000 (usable) DMI 2.6 present. No NUMA configuration found Faking a node at 0000000000000000-000000013c000000 Bootmem setup node 0 0000000000000000-000000013c000000 No mptable found. Memory for crash kernel (0x0 to 0x0) notwithin permissible range disabling kdump On node 0 totalpages: 1010585 DMA zone: 2625 pages, LIFO batch:0 DMA32 zone: 765560 pages, LIFO batch:31 Normal zone: 242400 pages, LIFO batch:31 Nosave address range: 000000000009d000 - 00000000000a0000 Nosave address range: 00000000000a0000 - 00000000000e0000 Nosave address range: 00000000000e0000 - 0000000000100000 Nosave address range: 00000000bf63f000 - 00000000bf6bf000 Nosave address range: 00000000bf6bf000 - 00000000bf7bf000 Nosave address range: 00000000bf7bf000 - 00000000bf7ff000 Nosave address range: 00000000bf800000 - 00000000c0000000 Nosave address range: 00000000c0000000 - 00000000e0000000 Nosave address range: 00000000e0000000 - 00000000f0000000 Nosave address range: 00000000f0000000 - 00000000feb00000 Nosave address range: 00000000feb00000 - 00000000feb04000 Nosave address range: 00000000feb04000 - 00000000fec00000 Nosave address range: 00000000fec00000 - 00000000fec01000 Nosave address range: 00000000fec01000 - 00000000fed10000 Nosave address range: 00000000fed10000 - 00000000fed14000 Nosave address range: 00000000fed14000 - 00000000fed18000 Nosave address range: 00000000fed18000 - 00000000fed1a000 Nosave address range: 00000000fed1a000 - 00000000fed1b000 Nosave address range: 00000000fed1b000 - 00000000fed20000 Nosave address range: 00000000fed20000 - 00000000fee00000 Nosave address range: 00000000fee00000 - 00000000fee01000 Nosave address range: 00000000fee01000 - 00000000ffe80000 Nosave address range: 00000000ffe80000 - 0000000100000000 Allocating PCI resources starting at c2000000 (gap: c0000000:20000000) SMP: Allowing 0 CPUs, 0 hotplug CPUs Built 1 zonelists. Total pages: 1010585 Kernel command line: ro root=LABEL=/ rhgb quiet noapic acpi=off apci=off Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Checking aperture... ACPI: DMAR not present PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing software IO TLB between 0x1623000 - 0x5623000 Memory: 3966292k/5177344k available (2573k kernel code, 152032k reserved, 1305k data, 212k init) Calibrating delay loop (skipped), value calculated using timer frequency.. 4522.58 BogoMIPS (lpj=2261291) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 3072K using mwait in idle threads. CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM1) SMP alternatives: switching to UP code Freeing SMP alternatives: 32k freed weird, boot CPU (#0) not listed by the BIOS. SMP motherboard not detected. Using local APIC timer interrupts. Detected 8.313 MHz APIC timer. testing NMI watchdog ... OK. SMP disabled Brought up 1 CPUs testing NMI watchdog ... OK. time.c: Using 1.193182 MHz WALL PIT GTOD PIT/TSC timer. time.c: Detected 2261.291 MHz processor. sizeof(vma)=176 bytes sizeof(page)=56 bytes sizeof(inode)=560 bytes sizeof(dentry)=216 bytes sizeof(ext3inode)=760 bytes sizeof(buffer_head)=96 bytes sizeof(skbuff)=248 bytes checking if image is initramfs... it is Freeing initrd memory: 2601k freed NET: Registered protocol family 16 PCI: Using configuration type 1 ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) ACPI Error (tbget-0168): Invalid address flags 8 [20060707] ACPI Error (tbget-0168): Invalid address flags 8 [20060707] ACPI Error (tbget-0168): Invalid address flags 8 [20060707] ACPI Error (tbget-0168): Invalid address flags 8 [20060707] ACPI Error (tbget-0168): Invalid address flags 8 [20060707] ACPI Error (tbget-0168): Invalid address flags 8 [20060707] ACPI Error (tbget-0168): Invalid address flags 8 [20060707] ACPI Error (tbget-0168): Invalid address flags 8 [20060707] ACPI Error (tbget-0168): Invalid address flags 8 [20060707] ACPI Error (tbget-0168): Invalid address flags 8 [20060707] ACPI Error (tbget-0168): Invalid address flags 8 [20060707] ACPI Error (tbget-0168): Invalid address flags 8 [20060707] ACPI Error (tbget-0168): Invalid address flags 8 [20060707] ACPI Error (tbget-0168): Invalid address flags 8 [20060707] ACPI Error (tbget-0168): Invalid address flags 8 [20060707] ACPI Error (tbget-0168): Invalid address flags 8 [20060707] ACPI Error (tbget-0168): Invalid address flags 8 [20060707] ACPI Error (tbget-0168): Invalid address flags 8 [20060707] ACPI Error (tbget-0168): Invalid address flags 8 [20060707] ACPI Error (tbget-0168): Invalid address flags 8 [20060707] ACPI Error (tbget-0168): Invalid address flags 8 [20060707] ACPI Error (tbget-0168): Invalid address flags 8 [20060707] ACPI Error (tbget-0168): Invalid address flags 8 [20060707] PCI: Transparent bridge - 0000:00:1e.0 PCI: Discovered primary peer bus 06 [IRQ] PCI: Discovered primary peer bus 07 [IRQ] PCI: Discovered primary peer bus 08 [IRQ] PCI: Discovered primary peer bus 0b [IRQ] PCI: Using IRQ router PIIX/ICH [8086/3b03] at 0000:00:1f.0 PCI: setting IRQ 11 as level-triggered PCI: Found IRQ 11 for device 0000:00:01.0 PCI: Sharing IRQ 11 with 0000:00:1a.0 PCI: Sharing IRQ 11 with 0000:00:1c.1 PCI: Sharing IRQ 11 with 0000:00:1c.7 PCI: Sharing IRQ 11 with 0000:01:00.0 PCI: Sharing IRQ 11 with 0000:01:00.1 PCI: Sharing IRQ 11 with 0000:02:00.0 PCI: Sharing IRQ 11 with 0000:03:00.0 PCI: Found IRQ 11 for device 0000:00:1c.0 PCI: Sharing IRQ 11 with 0000:00:1c.4 NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default ACPI: DMAR not present PCI-GART: No AMD northbridge found. PCI: Bridge: 0000:00:01.0 IO window: 6000-6fff MEM window: d2000000-d30fffff PREFETCH window 0x00000000c0000000-0x00000000d1ffffff PCI: Bridge: 0000:00:1c.0 IO window: 5000-5fff MEM window: da100000-db0fffff PREFETCH window 0x00000000d3100000-0x00000000d40fffff PCI: Bridge: 0000:00:1c.1 IO window: 4000-4fff MEM window: d9100000-da0fffff PREFETCH window 0x00000000d4100000-0x00000000d50fffff PCI: Bridge: 0000:00:1c.4 IO window: 3000-3fff MEM window: d8100000-d90fffff PREFETCH window 0x00000000d5100000-0x00000000d60fffff PCI: Bridge: 0000:00:1c.7 IO window: 2000-2fff MEM window: d7100000-d80fffff PREFETCH window 0x00000000d6100000-0x00000000d70fffff PCI: Bridge: 0000:00:1e.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Found IRQ 11 for device 0000:00:01.0 PCI: Sharing IRQ 11 with 0000:00:1a.0 PCI: Sharing IRQ 11 with 0000:00:1c.1 PCI: Sharing IRQ 11 with 0000:00:1c.7 PCI: Sharing IRQ 11 with 0000:01:00.0 PCI: Sharing IRQ 11 with 0000:01:00.1 PCI: Sharing IRQ 11 with 0000:02:00.0 PCI: Sharing IRQ 11 with 0000:03:00.0 PCI: Setting latency timer of device 0000:00:01.0 to 64 PCI: Found IRQ 11 for device 0000:00:1c.0 PCI: Sharing IRQ 11 with 0000:00:1c.4 PCI: Setting latency timer of device 0000:00:1c.0 to 64 PCI: Found IRQ 11 for device 0000:00:1c.1 PCI: Sharing IRQ 11 with 0000:00:01.0 PCI: Sharing IRQ 11 with 0000:00:1a.0 PCI: Sharing IRQ 11 with 0000:00:1c.7 PCI: Sharing IRQ 11 with 0000:01:00.0 PCI: Sharing IRQ 11 with 0000:01:00.1 PCI: Sharing IRQ 11 with 0000:02:00.0 PCI: Sharing IRQ 11 with 0000:03:00.0 PCI: Setting latency timer of device 0000:00:1c.1 to 64 PCI: Found IRQ 11 for device 0000:00:1c.4 PCI: Sharing IRQ 11 with 0000:00:1c.0 PCI: Setting latency timer of device 0000:00:1c.4 to 64 PCI: Found IRQ 11 for device 0000:00:1c.7 PCI: Sharing IRQ 11 with 0000:00:01.0 PCI: Sharing IRQ 11 with 0000:00:1a.0 PCI: Sharing IRQ 11 with 0000:00:1c.1 PCI: Sharing IRQ 11 with 0000:01:00.0 PCI: Sharing IRQ 11 with 0000:01:00.1 PCI: Sharing IRQ 11 with 0000:02:00.0 PCI: Sharing IRQ 11 with 0000:03:00.0 PCI: Setting latency timer of device 0000:00:1c.7 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered audit: initializing netlink socket (disabled) type=2000 audit(1276842957.285:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API alg: No test for crc32c (crc32c-generic) ksign: Installing public key data Loading keyring - Added public key 7664334D64FC7447 - User ID: CentOS (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Boot video device is 0000:01:00.0 PCI: Setting latency timer of device 0000:00:01.0 to 64 PCI: Setting latency timer of device 0000:00:1c.0 to 64 PCI: Setting latency timer of device 0000:00:1c.1 to 64 PCI: Setting latency timer of device 0000:00:1c.4 to 64 PCI: Setting latency timer of device 0000:00:1c.7 to 64 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled brd: module loaded Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Probing IDE interface ide0... Probing IDE interface ide1... ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 TCP bic registered Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Initalizing network drop monitor service Freeing unused kernel memory: 212k freed Write protecting the kernel read-only data: 504k input: AT Translated Set 2 keyboard as /class/input/input0 PCI: Found IRQ 11 for device 0000:00:1a.0 PCI: Sharing IRQ 11 with 0000:01:00.0 PCI: Sharing IRQ 11 with 0000:01:00.1 PCI: Sharing IRQ 11 with 0000:02:00.0 PCI: Sharing IRQ 11 with 0000:03:00.0 PCI: Setting latency timer of device 0000:00:1a.0 to 64 ehci_hcd 0000:00:1a.0: EHCI Host Controller ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.0: debug port 2 PCI: cache line size of 32 is not supported by device 0000:00:1a.0 ehci_hcd 0000:00:1a.0: irq 11, io mem 0xdb105c00 ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected PCI: Found IRQ 11 for device 0000:00:1d.0 PCI: Setting latency timer of device 0000:00:1d.0 to 64 ehci_hcd 0000:00:1d.0: EHCI Host Controller ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.0: debug port 2 PCI: cache line size of 32 is not supported by device 0000:00:1d.0 ehci_hcd 0000:00:1d.0: irq 11, io mem 0xdb105800 ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) USB Universal Host Controller Interface driver v3.0 SCSI subsystem initialized libata version 3.00 loaded. ahci 0000:00:1f.2: version 3.0 PCI: setting IRQ 10 as level-triggered PCI: Found IRQ 10 for device 0000:00:1f.2 PCI: Sharing IRQ 10 with 0000:00:1f.3 PCI: Sharing IRQ 10 with 0000:00:1f.6 usb 1-1: new high speed USB device using ehci_hcd and address 2 usb 1-1: configuration #1 chosen from 1 choice hub 1-1:1.0: USB hub found hub 1-1:1.0: 6 ports detected Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04711/0xa00000 usb 2-1: new high speed USB device using ehci_hcd and address 2 input: SynPS/2 Synaptics TouchPad as /class/input/input1 usb 2-1: configuration #1 chosen from 1 choice hub 2-1:1.0: USB hub found hub 2-1:1.0: 8 ports detected usb 2-1.3: new full speed USB device using ehci_hcd and address 3 usb 2-1.3: configuration #1 chosen from 1 choice ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x33 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pio slum part ems PCI: Setting latency timer of device 0000:00:1f.2 to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 abar m2048 at 0xdb105000 port 0xdb105100 irq 105 ata2: SATA max UDMA/133 abar m2048 at 0xdb105000 port 0xdb105180 irq 105 ata3: DUMMY ata4: DUMMY ata5: SATA max UDMA/133 abar m2048 at 0xdb105000 port 0xdb105300 irq 105 ata6: SATA max UDMA/133 abar m2048 at 0xdb105000 port 0xdb105380 irq 105 usb 2-1.5: new high speed USB device using ehci_hcd and address 4 usb 2-1.5: configuration #1 chosen from 1 choice ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-8: Hitachi HTS725050A9A364, PC4OC72E, max UDMA/100 ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/100 ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ATAPI: hp DVDWBD TS-LB23L, 0400, max UDMA/100, ATAPI AN ata2.00: configured for UDMA/100 ata5: SATA link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) Vendor: ATA Model: Hitachi HTS72505 Rev: PC4O Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 sd 0:0:0:0: Attached scsi disk sda Vendor: hp Model: DVDWBD TS-LB23L Rev: 0400 Type: CD-ROM ANSI SCSI revision: 05 device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel at redhat.com device-mapper: dm-raid45: initialized v0.2594l kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks type=1404 audit(1276842984.285:2): selinux=0 auid=4294967295 ses=4294967295 input: PC Speaker as /class/input/input2 Linux video capture interface: v2.00 uvcvideo: Found UVC 1.00 device HP Webcam (0408:03ba) input: HP Webcam as /class/input/input3 usbcore: registered new driver uvcvideo USB Video Class driver (v0.1.0) shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 sdhci: Secure Digital Host Controller Interface driver, 0.12 sdhci: Copyright(c) Pierre Ossman sdhci: SDHCI controller found at 0000:04:00.2 [197b:2381] (rev 0) PCI: Found IRQ 11 for device 0000:04:00.2 PCI: Sharing IRQ 11 with 0000:04:00.0 PCI: Sharing IRQ 11 with 0000:04:00.1 PCI: Sharing IRQ 11 with 0000:04:00.3 PCI: Sharing IRQ 11 with 0000:04:00.4 sdhci:slot0: Unknown controller version (1). You may experience problems. PCI: Setting latency timer of device 0000:04:00.2 to 64 mmc0: SDHCI at 0xd8100a00 irq 11 DMA r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded PCI: Found IRQ 11 for device 0000:03:00.0 PCI: Sharing IRQ 11 with 0000:00:1a.0 PCI: Sharing IRQ 11 with 0000:01:00.0 PCI: Sharing IRQ 11 with 0000:01:00.1 PCI: Sharing IRQ 11 with 0000:02:00.0 PCI: Setting latency timer of device 0000:03:00.0 to 64 eth0: RTL8168d/8111d at 0xffffc2000001e000, c8:0a:a9:94:85:03, XID 083000c0 IRQ 113 cfg80211: Calling CRDA to update world regulatory domain cfg80211: World regulatory domain updated: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 1:0:0:0: Attached scsi generic sg1 type 5 PCI: Found IRQ 10 for device 0000:00:1f.3 PCI: Sharing IRQ 10 with 0000:00:1f.6 iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k iwlagn: Copyright(c) 2003-2009 Intel Corporation PCI: Found IRQ 11 for device 0000:02:00.0 PCI: Sharing IRQ 11 with 0000:00:1a.0 PCI: Sharing IRQ 11 with 0000:01:00.0 PCI: Sharing IRQ 11 with 0000:01:00.1 PCI: Setting latency timer of device 0000:02:00.0 to 64 iwlagn: Detected Intel Wireless WiFi Link 6000 Series 2x2 AGN REV=0x74 iwlagn: Tunable channels: 13 802.11bg, 24 802.11a channels sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 phy0: Selected rate control algorithm 'iwl-agn-rs' PCI: Found IRQ 10 for device 0000:00:1b.0 PCI: Setting latency timer of device 0000:00:1b.0 to 64 input: HDA Digital PCBeep as /class/input/input4 floppy0: no floppy controllers found lp: driver loaded but no devices found NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. device-mapper: multipath: version 1.0.5 loaded loop: loaded (max 8 devices) EXT3 FS on sda1, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 4096564k swap on /dev/sda2. Priority:-1 extents:1 across:4096564k IA-32 Microcode Update Driver: v1.14a <tigran at veritas.com> ip6_tables: (C) 2000-2006 Netfilter Core Team ip_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. ip_conntrack version 2.4 (8192 buckets, 65536 max) - 304 bytes per conntrack r8169: eth0: link up r8169: eth0: link up Bluetooth: Core ver 2.10 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 dahdi: Telephony Interface Registered on major 196 dahdi: Version: 2.2.1 dahdi: Registered tone zone 0 (United States / North America) Bluetooth: HIDP (Human Interface Emulation) ver 1.1 eth0: no IPv6 routers present