Nut upsuser - Jul 2010 - Tripplite Omnivs100

Hi,

I've been trying to get my new Tripplite OmniVS100 UPS (USB Connection) to
work on my system. What I have is:
Ubuntu 10.04 Server
Nut 2.4.3

/etc/nut/ups.conf
[omni]
                Driver = tripplite_usb
                Port = auto
                Desc = "My Server"

/etc/nut/nut.conf
MODE=standalone


Iget the following error when using the
> sudo upsdrvctl start
Network UPS Tools - Tripp Lite OMNIVS / SMARTPRO driver 0.20 (2.4.3)
Warning: This is an experimental driver.
Some features may not function correctly.

No matching USB/HID UPS found
Driver failed to start (exit status=1)
Network UPS Tools - UPS driver controller 2.4.3

Lsusb provides
> lsusb
Bus 005 Device 002: ID 413c:2105 Dell Computer Corp. Model L100 Keyboard

Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Bus 003 Device 002: ID 09ae:1007 Tripp Lite

Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

On Fri, Jul 9, 2010 at 3:42 PM, Ray Garza <rgarza28 at utpa.edu>
wrote:
> I?ve been trying to get my new Tripplite OmniVS100 UPS (USB Connection) to
> work on my system. What I have is:
[...]
> Bus 003 Device 002: ID 09ae:1007 Tripp Lite
The tripplite_usb driver was developed for older OmniVS1000 units
which have a USB ID of 09ae:0001.

Try the usbhid-ups driver instead. The source lists Product ID 1007 as
being supported.

Depending on the firmware version, voltages may be off by a factor of
10. If you like, you can post the output of upsc to see if anything
else needs a sanity check.

-- 
- Charles Lepple