I have a setup of asterisk 1.6 in one box and asteirsk 1.4 in another. I can send recieve faxes from both boxes fine to and from pstn. But the faxing between 1.6 and 1.4 extensions does fail. Any ideas please ? -- Thank You Amit Nepal
On Thu, Jan 20, 2011 at 3:14 PM, Amit Nepal <amit.n at phoenixinternet.net> wrote:> I have a setup of asterisk 1.6 in one box and asteirsk 1.4 in another. I can > send recieve faxes from both boxes fine to and from pstn. But the faxing > between 1.6 and 1.4 extensions does fail. Any ideas please ?You don't say what's between the boxes as the medium over which the faxes are going. Try a fax between them without t.38 and see if it goes through. It might be a connection that is not reliable for any kind of faxing. That would not be an asterisk problem, it would be a faxing over a bad connection problem.
Yes Tom,
I am sending via the PSTN gateway which is audio code in my case.
Thank You
Amit Nepal
On 1/20/2011 3:07 PM, Tom Rymes wrote:> On 01/20/2011 4:26 PM, Amit Nepal wrote:
>
>> I have an Audio code gateway between two asterisk servers. The audio
>> code has PRI connected for PSTN. I can send faxes and receive faxes in
>> ast 1.4 . Also I can send faxes for ast 1.6 to outside (PSTN) and
>> receive faxes. The only problem I am having is sending/receiving
between
>> ast 1.4 and ast 1.6.
>>
>> ATA (T.38 capable) > AST 1.6
>>>>>>>>>>AUDIO
CODE>>>>>>>>>>AST
>> 1.4>>>>>>ATA (t.38 Capable)
>
> It sounds like you are trying to send a fax directly from "AST
1.6" to
> "AST 1.4" via t.38 that never hits the PSTN. Have you tried
sending a
> fax from "AST 1.6" out via the PSTN, and then back in via the
PSTN to
> "AST 1.4"?
>
> Tom
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
> http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
On Jan 20, 2011, at 5:52 PM, Amit Nepal wrote:> On 1/20/2011 3:07 PM, Tom Rymes wrote: >> On 01/20/2011 4:26 PM, Amit Nepal wrote: >> >>> I have an Audio code gateway between two asterisk servers. The audio >>> code has PRI connected for PSTN. I can send faxes and receive faxes in >>> ast 1.4 . Also I can send faxes for ast 1.6 to outside (PSTN) and >>> receive faxes. The only problem I am having is sending/receiving between >>> ast 1.4 and ast 1.6. >>> >>> ATA (T.38 capable) > AST 1.6 >>>>>>>>>>AUDIO CODE>>>>>>>>>>AST >>> 1.4>>>>>>ATA (t.38 Capable) >> >> It sounds like you are trying to send a fax directly from "AST 1.6" to "AST 1.4" via t.38 that never hits the PSTN. Have you tried sending a fax from "AST 1.6" out via the PSTN, and then back in via the PSTN to "AST 1.4"?>> Yes Tom, I am sending via the PSTN gateway which is audio code in my case.Ok, are both boxes connected to the same audiocodes gateway? Or are they in different locations? Can you try sending via regular POTS lines? Tom
Amit Make sure that the trunk you have between the two servers has the t.38 enabled on it. Do you have any NAT between the two servers or are they on the same lan. We do the t.38 faxing between 1.4 and 1.6 asterisk boxes all of the time. Our audio codes gateway dumps into a 1.4 box and all faxes calls are then sent to either 1.6.x or 1.8.x boxes and then on to the final ata. Thanks Bryant Zimmerman (ZK Tech Inc.) 616-855-1030 Ext. 2003 ---------------------------------------- From: "Amit Nepal" <amit.n at phoenixinternet.net> Sent: Thursday, January 20, 2011 4:27 PM To: asterisk-users at lists.digium.com Subject: Re: [asterisk-users] Asterisk to asterisk t.38 Hi, I have an Audio code gateway between two asterisk servers. The audio code has PRI connected for PSTN. I can send faxes and receive faxes in ast 1.4 . Also I can send faxes for ast 1.6 to outside (PSTN) and receive faxes. The only problem I am having is sending/receiving between ast 1.4 and ast 1.6. ATA (T.38 capable) > AST 1.6 >>>>>>>>>>AUDIO CODE>>>>>>>>>>AST 1.4>>>>>>ATA (t.38 Capable) Thank You Amit Nepal On 1/20/2011 1:56 PM, David Backeberg wrote:> On Thu, Jan 20, 2011 at 3:14 PM, Amit Nepal<amit.n at phoenixinternet.net>wrote:>> I have a setup of asterisk 1.6 in one box and asteirsk 1.4 in another. Ican>> send recieve faxes from both boxes fine to and from pstn. But thefaxing>> between 1.6 and 1.4 extensions does fail. Any ideas please ? > You don't say what's between the boxes as the medium over which the > faxes are going. > > Try a fax between them without t.38 and see if it goes through. It > might be a connection that is not reliable for any kind of faxing. > > That would not be an asterisk problem, it would be a faxing over a bad > connection problem. > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > >-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110120/c242dafc/attachment.htm>