I have * 1.6.0.9 with dahdi-linux 2.1.0.4, dahdi-tools 2.1.0.2, libpri 1.4.10 and wanpipe-3.4.1 running on CentOS 5.3 64bit. I have 2 ports of the a104d configured for use with PRI lines and 2 ports configured for use with Adtran Total Access 850 channel banks. The channel banks have 6 four port FXS cards in them. The PRI lines work as expected. I can call a phone connected to the channel bank and this works as expected. If I pick up the phone connected to the channel bank and dial a digit I immediately get a fast busy tone. The exceptions is that if I dial *7<anything> then I can dial these three keys. Nothing of much interest shows on the * console other then when I hang up the phone this event is reported. If while talking on the phone when someone calls me, I press a key on the phone connected to the channel bank, the person called hears a faint pop and then the pressed dtmf tone. Any ideas as to what might cause this behavior? Thanks for any ideas! -- Jim Dickenson mailto:dickenson at cfmc.com CfMC http://www.cfmc.com/
Grygoriy Dobrovolskyy
2009-May-07 10:20 UTC
[asterisk-users] Sangoma a104d and channel banks
2009/5/7 Jim Dickenson <dickenson at cfmc.com>> I have * 1.6.0.9 with dahdi-linux 2.1.0.4, dahdi-tools 2.1.0.2, libpri > 1.4.10 and wanpipe-3.4.1 running on CentOS 5.3 64bit. > > I have 2 ports of the a104d configured for use with PRI lines and 2 ports > configured for use with Adtran Total Access 850 channel banks. The channel > banks have 6 four port FXS cards in them. > > The PRI lines work as expected. > > I can call a phone connected to the channel bank and this works as > expected. > > If I pick up the phone connected to the channel bank and dial a digit I > immediately get a fast busy tone. The exceptions is that if I dial > *7<anything> then I can dial these three keys. Nothing of much interest > shows on the * console other then when I hang up the phone this event is > reported. > > If while talking on the phone when someone calls me, I press a key on the > phone connected to the channel bank, the person called hears a faint pop > and > then the pressed dtmf tone. > > Any ideas as to what might cause this behavior? > > Thanks for any ideas! > -- > Jim Dickenson > mailto:dickenson at cfmc.com > > CfMC > http://www.cfmc.com/ >Look if your channel bank dont have any fancy dialplan configured. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090507/7b3f3600/attachment.htm
From: Grygoriy Dobrovolskyy <megahohol at gmail.com> Reply-To: Asterisk Users Mailing List - Non-Commercial Discussion <asterisk-users at lists.digium.com> Date: Thu, 7 May 2009 12:20:07 +0200 To: Asterisk Users Mailing List - Non-Commercial Discussion <asterisk-users at lists.digium.com> Subject: Re: [asterisk-users] Sangoma a104d and channel banks 2009/5/7 Jim Dickenson <dickenson at cfmc.com>> I have * 1.6.0.9 with dahdi-linux 2.1.0.4, dahdi-tools 2.1.0.2, libpri > 1.4.10 and wanpipe-3.4.1 running on CentOS 5.3 64bit. > > I have 2 ports of the a104d configured for use with PRI lines and 2 ports > configured for use with Adtran Total Access 850 channel banks. The channel > banks have 6 four port FXS cards in them. > > The PRI lines work as expected. > > I can call a phone connected to the channel bank and this works as expected. > > If I pick up the phone connected to the channel bank and dial a digit I > immediately get a fast busy tone. The exceptions is that if I dial > *7<anything> then I can dial these three keys. Nothing of much interest > shows on the * console other then when I hang up the phone this event is > reported. > > If while talking on the phone when someone calls me, I press a key on the > phone connected to the channel bank, the person called hears a faint pop and > then the pressed dtmf tone. > > Any ideas as to what might cause this behavior? > > Thanks for any ideas! > -- > Jim Dickenson > mailto:dickenson at cfmc.com > > CfMC > http://www.cfmc.com/Look if your channel bank dont have any fancy dialplan configured. The context the channel bank phones are in includes one context that only has extensions 111, 222, 333, 444 and 555. -- Jim Dickenson mailto:dickenson at cfmc.com CfMC http://www.cfmc.com/ -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090507/fa3bacfc/attachment.htm
Grygoriy Dobrovolskyy
2009-May-07 13:21 UTC
[asterisk-users] Sangoma a104d and channel banks
2009/5/7 Jim Dickenson <dickenson at cfmc.com>> *From: *Grygoriy Dobrovolskyy <megahohol at gmail.com> > *Reply-To: *Asterisk Users Mailing List - Non-Commercial Discussion < > asterisk-users at lists.digium.com> > *Date: *Thu, 7 May 2009 12:20:07 +0200 > *To: *Asterisk Users Mailing List - Non-Commercial Discussion < > asterisk-users at lists.digium.com> > *Subject: *Re: [asterisk-users] Sangoma a104d and channel banks > > > > > 2009/5/7 Jim Dickenson <dickenson at cfmc.com> > > I have * 1.6.0.9 with dahdi-linux 2.1.0.4, dahdi-tools 2.1.0.2, libpri > 1.4.10 and wanpipe-3.4.1 running on CentOS 5.3 64bit. > > I have 2 ports of the a104d configured for use with PRI lines and 2 ports > configured for use with Adtran Total Access 850 channel banks. The channel > banks have 6 four port FXS cards in them. > > The PRI lines work as expected. > > I can call a phone connected to the channel bank and this works as > expected. > > If I pick up the phone connected to the channel bank and dial a digit I > immediately get a fast busy tone. The exceptions is that if I dial > *7<anything> then I can dial these three keys. Nothing of much interest > shows on the * console other then when I hang up the phone this event is > reported. > > If while talking on the phone when someone calls me, I press a key on the > phone connected to the channel bank, the person called hears a faint pop > and > then the pressed dtmf tone. > > Any ideas as to what might cause this behavior? > > Thanks for any ideas! > -- > Jim Dickenson > mailto:dickenson at cfmc.com <dickenson at cfmc.com> > > CfMC > http://www.cfmc.com/ > > > Look if your channel bank dont have any fancy dialplan configured. > > > ------------------------------ > The context the channel bank phones are in includes one context that only > has extensions 111, 222, 333, 444 and 555. >I am not taling about the dialplan inside asterisk, i dont know if you channel bank is managable or not, like for example aastra phones has their dialplant configured inside teh phone. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090507/23721278/attachment.htm
From: Grygoriy Dobrovolskyy <megahohol at gmail.com> Reply-To: Asterisk Users Mailing List - Non-Commercial Discussion <asterisk-users at lists.digium.com> Date: Thu, 7 May 2009 15:21:03 +0200 To: Asterisk Users Mailing List - Non-Commercial Discussion <asterisk-users at lists.digium.com> Subject: Re: [asterisk-users] Sangoma a104d and channel banks 2009/5/7 Jim Dickenson <dickenson at cfmc.com>> From: Grygoriy Dobrovolskyy <megahohol at gmail.com> > Reply-To: Asterisk Users Mailing List - Non-Commercial Discussion > <asterisk-users at lists.digium.com> > Date: Thu, 7 May 2009 12:20:07 +0200 > To: Asterisk Users Mailing List - Non-Commercial Discussion > <asterisk-users at lists.digium.com> > Subject: Re: [asterisk-users] Sangoma a104d and channel banks > > > > > 2009/5/7 Jim Dickenson <dickenson at cfmc.com> >> I have * 1.6.0.9 with dahdi-linux 2.1.0.4, dahdi-tools 2.1.0.2, libpri >> 1.4.10 and wanpipe-3.4.1 running on CentOS 5.3 64bit. >> >> I have 2 ports of the a104d configured for use with PRI lines and 2 ports >> configured for use with Adtran Total Access 850 channel banks. The channel >> banks have 6 four port FXS cards in them. >> >> The PRI lines work as expected. >> >> I can call a phone connected to the channel bank and this works as expected. >> >> If I pick up the phone connected to the channel bank and dial a digit I >> immediately get a fast busy tone. The exceptions is that if I dial >> *7<anything> then I can dial these three keys. Nothing of much interest >> shows on the * console other then when I hang up the phone this event is >> reported. >> >> If while talking on the phone when someone calls me, I press a key on the >> phone connected to the channel bank, the person called hears a faint pop and >> then the pressed dtmf tone. >> >> Any ideas as to what might cause this behavior? >> >> Thanks for any ideas! >> -- >> Jim Dickenson >> mailto:dickenson at cfmc.com >> >> CfMC >> http://www.cfmc.com/ > > Look if your channel bank dont have any fancy dialplan configured. > > > > The context the channel bank phones are in includes one context that only has > extensions 111, 222, 333, 444 and 555.I am not taling about the dialplan inside asterisk, i dont know if you channel bank is managable or not, like for example aastra phones has their dialplant configured inside teh phone. Sorry, no the phone is a regular dumb analog phone. The Adtran Total Access 850, as far as I know, has no place to do any dtmf based logic. You just set various pacing and signaling options. -- Jim Dickenson mailto:dickenson at cfmc.com CfMC http://www.cfmc.com/ -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090507/c2e8fff7/attachment.htm
I have more info now. I have used AMI to watch events, including DTMF events. The phone comes off hook and I see a line on the * CLI saying the line is off hook. I then touch a key and I see the DTMF event in the AMI. At the same time I see a message on CLI that says hangup the line. -- Jim Dickenson mailto:dickenson at cfmc.com CfMC http://www.cfmc.com/ -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090507/93cd4f7a/attachment.htm
Hi, This may be completely wrong, but I have a feeling it may be related. Have you enabled "overlapdialling" in zapata.conf for the channels that are on the channelbank? If not, the 1st digit will be sent in, not match the dialplan, and be hungup. *7xxx is probably working because that matches a built-in feature (transfer?), so the system KNOWS already that it needs more digits. Cheers, Steve 2009/5/7 Jim Dickenson <dickenson at cfmc.com>:> I have more info now. > > I have used AMI to watch events, including DTMF events. The phone comes off > hook and I see a line on the * CLI saying the line is off hook. I then touch > a key and I see the DTMF event in the AMI. At the same time I see a message > on CLI that says hangup the line.
The problem turned out to be that I had a typo in my include => line so I was not including the extensions that I intended to in extensions.conf. Unlike chan_sip, chan_dahdi does not print the nice messages on CLI that says you have dialed an unknown extension. As I was use to these messages for SIP I did not associate my problem with unknown extensions. To find this the console line in logger.conf got debug added to it and I cranked up the debug level and eventually saw an error about no matching extension. -- Jim Dickenson mailto:dickenson at cfmc.com CfMC http://www.cfmc.com/> From: Steve Davies <davies147 at gmail.com> > Reply-To: Asterisk Users Mailing List - Non-Commercial Discussion > <asterisk-users at lists.digium.com> > Date: Fri, 8 May 2009 10:21:26 +0100 > To: Asterisk Users Mailing List - Non-Commercial Discussion > <asterisk-users at lists.digium.com> > Subject: Re: [asterisk-users] Sangoma a104d and channel banks > > Hi, > > This may be completely wrong, but I have a feeling it may be related. > Have you enabled "overlapdialling" in zapata.conf for the channels > that are on the channelbank? If not, the 1st digit will be sent in, > not match the dialplan, and be hungup. > > *7xxx is probably working because that matches a built-in feature > (transfer?), so the system KNOWS already that it needs more digits. > > Cheers, > Steve > > 2009/5/7 Jim Dickenson <dickenson at cfmc.com>: >> I have more info now. >> >> I have used AMI to watch events, including DTMF events. The phone comes off >> hook and I see a line on the * CLI saying the line is off hook. I then touch >> a key and I see the DTMF event in the AMI. At the same time I see a message >> on CLI that says hangup the line. > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users