*Quote:* [root at vicidialnow src]# service network restart Shutting down interface eth0: [ OK ] Shutting down loopback interface: [ OK ] Bringing up loopback interface: [ OK ] Bringing up interface eth0: [ OK ] Bringing up interface eth1: skge device eth1 does not seem to be present, delaying initialization. [FAILED] [root at vicidialnow src]# eth1 is the Oboard card. I did install driver but its same. I am sure Driver is a correct one as after installing driver it showed me the card which is eth1 but due to soem issues I deleted that network interface from webmin. But now its NOT detecting. Kindly advice ____________ -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090125/fadd9229/attachment.htm
Sorry to bump it , but any help ? Like un-installing the driver and reinstalling it will solve the issue ? Or shld I reinstall the OS again ? On Sun, Jan 25, 2009 at 2:53 PM, David @ULC <ucoms2001 at gmail.com> wrote:> *Quote:* > > > [root at vicidialnow src]# service network restart > Shutting down interface eth0: [ OK ] > Shutting down loopback interface: [ OK ] > Bringing up loopback interface: [ OK ] > Bringing up interface eth0: [ OK ] > Bringing up interface eth1: skge device eth1 does not seem to be present, > delaying initialization. > [FAILED] > [root at vicidialnow src]# > > > > > eth1 is the Oboard card. I did install driver but its same. I am sure > Driver is a correct one as after installing driver it showed me the card > which is eth1 but due to soem issues I deleted that network interface from > webmin. > > But now its NOT detecting. > > Kindly advice > ____________ >-------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090125/c07e03b6/attachment.htm
Why? This is not an Asterisk problem... You need to find a forum specific to your linux distro... Lyle David @ULC wrote:> Sorry to bump it , but any help ? > > Like un-installing the driver and reinstalling it will solve the issue ? > > Or shld I reinstall the OS again ? > > On Sun, Jan 25, 2009 at 2:53 PM, David @ULC <ucoms2001 at gmail.com > <mailto:ucoms2001 at gmail.com>> wrote: > > *Quote:* > > > > [root at vicidialnow src]# service network restart > Shutting down interface eth0: [ OK ] > Shutting down loopback interface: [ OK ] > Bringing up loopback interface: [ OK ] > Bringing up interface eth0: [ OK ] > Bringing up interface eth1: skge device eth1 does not seem to be > present, delaying initialization. > [FAILED] > [root at vicidialnow src]# > > > > > eth1 is the Oboard card. I did install driver but its same. I am > sure Driver is a correct one as after installing driver it showed > me the card which is eth1 but due to soem issues I deleted that > network interface from webmin. > > But now its NOT detecting. > > Kindly advice > ____________ > > > ------------------------------------------------------------------------ > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users-------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090125/bc32c5db/attachment-0001.htm
Sorry for Off topic Question On Sun, Jan 25, 2009 at 10:43 PM, David @ULC <ucoms2001 at gmail.com> wrote:> Sorry to bump it , but any help ? > Like un-installing the driver and reinstalling it will solve the issue ? > > Or shld I reinstall the OS again ? > > > On Sun, Jan 25, 2009 at 2:53 PM, David @ULC <ucoms2001 at gmail.com> wrote: > >> *Quote:* >> >> >> [root at vicidialnow src]# service network restart >> Shutting down interface eth0: [ OK ] >> Shutting down loopback interface: [ OK ] >> Bringing up loopback interface: [ OK ] >> Bringing up interface eth0: [ OK ] >> Bringing up interface eth1: skge device eth1 does not seem to be present, >> delaying initialization. >> [FAILED] >> [root at vicidialnow src]# >> >> >> >> >> eth1 is the Oboard card. I did install driver but its same. I am sure >> Driver is a correct one as after installing driver it showed me the card >> which is eth1 but due to soem issues I deleted that network interface from >> webmin. >> >> But now its NOT detecting. >> >> Kindly advice >> ____________ >> > >-------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090125/51772824/attachment.htm
lspci Returns me below Output :_________________________________
[root at vicidialnow ~]# lspci
00:00.0 Host bridge: Intel Corporation 82G35 Express DRAM Controller (rev
03)
00:02.0 VGA compatible controller: Intel Corporation 82G35 Express
Integrated Gr
aphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation 82G35 Express Integrated
Graphics
Controller (rev 03)
00:19.0 Ethernet controller: Intel Corporation 82566DC Gigabit Network
Connectio
n (rev 02)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
Contolle
r #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controll
er #5 (rev 02)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI
Control
ler #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio
Controller
(rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port
1 (r
ev 02)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port
2 (r
ev 02)
00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port
3 (r
ev 02)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controll
er #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controll
er #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controll
er #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI
Control
ler #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev f2)
00:1f.0 ISA bridge: Intel Corporation 82801HB/HR (ICH8/R) LPC Interface
Controll
er (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801H (ICH8 Family) 4 port SATA
IDE Co
ntroller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev
02)
00:1f.5 IDE interface: Intel Corporation 82801H (ICH8 Family) 2 port SATA
IDE Co
ntroller (rev 02)
03:00.0 IDE interface: JMicron Technologies, Inc. JMB368 IDE controller
04:03.0 Ethernet controller: D-Link System Inc DGE-530T Gigabit Ethernet
Adapter
(rev 11) (rev 11)
04:05.0 FireWire (IEEE 1394): Agere Systems FW323 (rev 70)
ifconfig -a Returns :
_________________________________
ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:1E:58:A7:3D:73
inet addr:121.247.xxx.xxx Bcast:121.247.xxx.xxx
Mask:255.255.255.0
inet6 addr: fe80::21e:58ff:fea7:3d73/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:415 errors:0 dropped:0 overruns:0 frame:0
TX packets:478 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:51514 (50.3 KiB) TX bytes:95169 (92.9 KiB)
Interrupt:169
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:112962 errors:0 dropped:0 overruns:0 frame:0
TX packets:112962 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:9165137 (8.7 MiB) TX bytes:9165137 (8.7 MiB)
sit0 Link encap:IPv6-in-IPv4
NOARP MTU:1480 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
On Sun, Jan 25, 2009 at 2:53 PM, David @ULC <ucoms2001 at gmail.com>
wrote:
> *Quote:*
>
>
> [root at vicidialnow src]# service network restart
> Shutting down interface eth0: [ OK ]
> Shutting down loopback interface: [ OK ]
> Bringing up loopback interface: [ OK ]
> Bringing up interface eth0: [ OK ]
> Bringing up interface eth1: skge device eth1 does not seem to be present,
> delaying initialization.
> [FAILED]
> [root at vicidialnow src]#
>
>
>
>
> eth1 is the Oboard card. I did install driver but its same. I am sure
> Driver is a correct one as after installing driver it showed me the card
> which is eth1 but due to soem issues I deleted that network interface from
> webmin.
>
> But now its NOT detecting.
>
> Kindly advice
> ____________
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20090126/ff78aaeb/attachment.htm
[root at vicidialnow ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth1 NAME="" BOOTPROTO=none TYPE=Ethernet DEVICE=eth1 MTU="" NETMASK=255.255.255.0 BROADCAST=192.168.0.100 IPADDR=192.168.0.100 NETWORK=192.168.0.0 ONBOOT=no On Mon, Jan 26, 2009 at 4:07 PM, David @ULC <ucoms2001 at gmail.com> wrote:> lspci Returns me below Output :_________________________________ > > [root at vicidialnow ~]# lspci > 00:00.0 Host bridge: Intel Corporation 82G35 Express DRAM Controller (rev > 03) > 00:02.0 VGA compatible controller: Intel Corporation 82G35 Express > Integrated Gr > aphics Controller (rev 03) > 00:02.1 Display controller: Intel Corporation 82G35 Express Integrated > Graphics > Controller (rev 03) > 00:19.0 Ethernet controller: Intel Corporation 82566DC Gigabit Network > Connectio > n (rev 02) > 00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI > Contolle > r #4 (rev 02) > 00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI > Controll > er #5 (rev 02) > 00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI > Control > ler #2 (rev 02) > 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio > Controller > (rev 02) > 00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port > 1 (r > ev 02) > 00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port > 2 (r > ev 02) > 00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port > 3 (r > ev 02) > 00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI > Controll > er #1 (rev 02) > 00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI > Controll > er #2 (rev 02) > 00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI > Controll > er #3 (rev 02) > 00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI > Control > ler #1 (rev 02) > 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev f2) > 00:1f.0 ISA bridge: Intel Corporation 82801HB/HR (ICH8/R) LPC Interface > Controll > er (rev 02) > 00:1f.2 IDE interface: Intel Corporation 82801H (ICH8 Family) 4 port SATA > IDE Co > ntroller (rev 02) > 00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev > 02) > 00:1f.5 IDE interface: Intel Corporation 82801H (ICH8 Family) 2 port SATA > IDE Co > ntroller (rev 02) > 03:00.0 IDE interface: JMicron Technologies, Inc. JMB368 IDE controller > 04:03.0 Ethernet controller: D-Link System Inc DGE-530T Gigabit Ethernet > Adapter > (rev 11) (rev 11) > 04:05.0 FireWire (IEEE 1394): Agere Systems FW323 (rev 70) > > > > ifconfig -a Returns : > _________________________________ > > ifconfig -a > eth0 Link encap:Ethernet HWaddr 00:1E:58:A7:3D:73 > inet addr:121.247.xxx.xxx Bcast:121.247.xxx.xxx > Mask:255.255.255.0 > inet6 addr: fe80::21e:58ff:fea7:3d73/64 Scope:Link > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:415 errors:0 dropped:0 overruns:0 frame:0 > TX packets:478 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:51514 (50.3 KiB) TX bytes:95169 (92.9 KiB) > Interrupt:169 > > lo Link encap:Local Loopback > inet addr:127.0.0.1 Mask:255.0.0.0 > inet6 addr: ::1/128 Scope:Host > UP LOOPBACK RUNNING MTU:16436 Metric:1 > RX packets:112962 errors:0 dropped:0 overruns:0 frame:0 > TX packets:112962 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:0 > RX bytes:9165137 (8.7 MiB) TX bytes:9165137 (8.7 MiB) > > sit0 Link encap:IPv6-in-IPv4 > NOARP MTU:1480 Metric:1 > RX packets:0 errors:0 dropped:0 overruns:0 frame:0 > TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:0 > RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) > > > > > > > > > > > On Sun, Jan 25, 2009 at 2:53 PM, David @ULC <ucoms2001 at gmail.com> wrote: > >> *Quote:* >> >> >> [root at vicidialnow src]# service network restart >> Shutting down interface eth0: [ OK ] >> Shutting down loopback interface: [ OK ] >> Bringing up loopback interface: [ OK ] >> Bringing up interface eth0: [ OK ] >> Bringing up interface eth1: skge device eth1 does not seem to be present, >> delaying initialization. >> [FAILED] >> [root at vicidialnow src]# >> >> >> >> >> eth1 is the Oboard card. I did install driver but its same. I am sure >> Driver is a correct one as after installing driver it showed me the card >> which is eth1 but due to soem issues I deleted that network interface from >> webmin. >> >> But now its NOT detecting. >> >> Kindly advice >> ____________ >> > >-------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090126/851750ba/attachment.htm