Hi guys i have a problem with my callerid, so could you please take a look and give me your advice This is my scenario (gsm network)<===>(cell base)<-----> (fxo)---(asterisk)----(fxo)<====>(PSTN) The problem is that i can not get the callerid (asterisk) when the the call is comming from the cell network , but i can get it if the call comes from the pstn Now, the cell base has a plug for a regular cheap phone, if i plug it and a call comes from the cell network in the analog display?s phone i can see the callerid wich is frustrating, so this is my zapata.conf ---------------------------------------------------------------------------------------- [channels] usecallerid=yes hidecallerid=no callwaiting=yes threewaycalling=yes callwaitingcallerid=yes transfer=yes echocancel=yes echotraining=yes echocancelwhenbridged=yes rxgain=0 txgain=0 inmediate=no relaxdtmf=yes language=en busydetect=yes busycount=6 cidsignalling=dtmf cidstart=polarity group=1 echocancel=yes signalling=fxs_ks context=from-zaptel channel=>1 group=2 echocancel=yes signalling=fxs_ks context=from-zaptel channel=>2 ---------------------------------------------------------------------------------------- i?m working with a tdm2400p, using centos centos 5.2 and kernel 2.6.18-92.1.13.el5, asterisk 1.4.22 and zaptel 1.412.1 Any ideas, it doesn?t matter if your idea is too crazy, i tried all cambiantions of cidsignalling (bell, v23 and dtmf) and cidstart (ring and polarity) without results thanks for your help Ps: cell base model g8504 Regards -- Yelson E Vivas C (571) 6500-800 -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20081105/08cde97a/attachment.htm