Hi Guys, I have a TDM400P (2FXS and 2FXO) installed on my asterisk (1.4.18.1) Zaptel (1.4.9.2) running on Fedora Core 7, below are my configurations and some diagnosis I did. The problem is when I connect an analogue phone on either of the FXS channels I don't get a dialtone, I can't call any of the sip clients or even call my echo test, number, which is an context included in that of the FXS port. How can I solve this problem? Please assist. After doing a /sbin/ztcfg -vv, after listing the zaptel channels configuration it says 4 channels to configure instead of 4 channels configured. is there any additional configuration or dependency I need to load (I've done modprobe wctdm and modprobe zaptel before doing /sbin/ztcfg -vv). zaptel.conf # Span 1: WCTDM/0 "Wildcard TDM400P REV I Board 1" (MASTER) fxoks=1 fxoks=2 fxsks=3 fxsks=4 # Global data loadzone = us defaultzone = us zapata.conf [trunkgroups] ; define any trunk groups [channels] ; hardware channels ;language=en ;context=from-zaptel ;signalling=fxs_ks ;rxwink=300 ; Atlas seems to use long (250ms) winks ; ; Whether or not to do distinctive ring detection on FXO lines ; usedistinctiveringdetection=yes ; default usecallerid=yes hidecallerid=no callwaiting=no usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=no ;echotraining=800 echotraining=yes rxgain=0.0 txgain=0.0 ;group=0 callgroup=1 pickupgroup=1 immediate=no context=phone signalling=fxo_ks channel => 1 ;callerid;mailbox;groupcontext=phone ;;; line="2 WCTDM/0/1 FXOKS (In use)" signalling=fxo_ks ;context=phone channel => 2 ;callerid;mailbox;groupcontext=incoming ;;; line="3 WCTDM/0/2 FXSKS (In use)" signalling=fxs_ks ;callerid=asreceived ;group=0 channel => 3 context=incoming ;;; line="4 WCTDM/0/3 FXSKS (In use)" signalling=fxs_ks ;callerid=asreceived ;group=0 ;context=incoming channel => 4 ;context=default [root at localhost /]# /sbin/ztcfg -vv Zaptel Version: 1.4.9.2 Echo Canceller: MG2 Configuration ===================== Channel map: Channel 01: FXO Kewlstart (Default) (Slaves: 01) Channel 02: FXO Kewlstart (Default) (Slaves: 02) Channel 03: FXS Kewlstart (Default) (Slaves: 03) Channel 04: FXS Kewlstart (Default) (Slaves: 04) 4 channels to configure. Asterisk CLI core score show channeltypes Type Description Devicestate Indications Transfer ---------- ----------- ----------- ----------- -------- Feature Feature Proxy Channel Driver no yes no IAX2 Inter Asterisk eXchange Driver (Ver 2) yes yes yes Local Local Proxy Channel Driver yes yes no SIP Session Initiation Protocol (SIP) yes yes yes Phone Standard Linux Telephony API Driver no yes no MGCP Media Gateway Control Protocol (MGCP) yes yes no Agent Call Agent Proxy Channel yes yes no ---------- 7 channel drivers registered. *CLI> module reload chan_zap.so No such module 'chan_zap.so' *CLI> -- Murithi Martin NOTICE: "The contents of this e-mail and any accompanying documentation is confidential and any use thereof, in whatever form, by anyone other than the addressee for whom it is intended is strictly prohibited."
Did you provide power to the card? FXS extensions need power. On Fri, 2008-04-11 at 08:11 +0300, Murithi Martin wrote:> Hi Guys, > I have a TDM400P (2FXS and 2FXO) installed on my asterisk (1.4.18.1) > Zaptel (1.4.9.2) running on Fedora Core 7, below are my configurations > and some diagnosis I did. The problem is when I connect an analogue > phone on either of the FXS channels I don't get a dialtone, I can't > call any of the sip clients or even call my echo test, number, which > is an context included in that of the FXS port. > How can I solve this problem? Please assist. > > After doing a /sbin/ztcfg -vv, after listing the zaptel channels > configuration it says 4 channels to configure instead of 4 channels > configured. is there any additional configuration or dependency I need > to load (I've done modprobe wctdm and modprobe zaptel before doing > /sbin/ztcfg -vv). > > > zaptel.conf > # Span 1: WCTDM/0 "Wildcard TDM400P REV I Board 1" (MASTER) > fxoks=1 > fxoks=2 > fxsks=3 > fxsks=4 > > # Global data > > loadzone = us > defaultzone = us > > > zapata.conf > [trunkgroups] > ; define any trunk groups > > [channels] > ; hardware channels > > ;language=en > ;context=from-zaptel > ;signalling=fxs_ks > ;rxwink=300 ; Atlas seems to use long (250ms) winks > ; > ; Whether or not to do distinctive ring detection on FXO lines > ; > usedistinctiveringdetection=yes > ; default > usecallerid=yes > hidecallerid=no > callwaiting=no > usecallingpres=yes > callwaitingcallerid=yes > threewaycalling=yes > transfer=yes > cancallforward=yes > callreturn=yes > echocancel=yes > echocancelwhenbridged=no > ;echotraining=800 > echotraining=yes > rxgain=0.0 > txgain=0.0 > > ;group=0 > callgroup=1 > pickupgroup=1 > immediate=no > context=phone > signalling=fxo_ks > channel => 1 > ;callerid> ;mailbox> ;group> context=phone > > ;;; line="2 WCTDM/0/1 FXOKS (In use)" > signalling=fxo_ks > ;context=phone > channel => 2 > ;callerid> ;mailbox> ;group> context=incoming > > ;;; line="3 WCTDM/0/2 FXSKS (In use)" > signalling=fxs_ks > ;callerid=asreceived > ;group=0 > channel => 3 > context=incoming > > ;;; line="4 WCTDM/0/3 FXSKS (In use)" > signalling=fxs_ks > ;callerid=asreceived > ;group=0 > ;context=incoming > channel => 4 > ;context=default > > > > [root at localhost /]# /sbin/ztcfg -vv > > Zaptel Version: 1.4.9.2 > Echo Canceller: MG2 > Configuration > =====================> > > Channel map: > > Channel 01: FXO Kewlstart (Default) (Slaves: 01) > Channel 02: FXO Kewlstart (Default) (Slaves: 02) > Channel 03: FXS Kewlstart (Default) (Slaves: 03) > Channel 04: FXS Kewlstart (Default) (Slaves: 04) > > 4 channels to configure. > > > > > Asterisk CLI > core score show channeltypes > Type Description Devicestate Indications Transfer > ---------- ----------- ----------- ----------- -------- > Feature Feature Proxy Channel Driver no yes no > IAX2 Inter Asterisk eXchange Driver (Ver 2) yes yes yes > Local Local Proxy Channel Driver yes yes no > SIP Session Initiation Protocol (SIP) yes yes yes > Phone Standard Linux Telephony API Driver no yes no > MGCP Media Gateway Control Protocol (MGCP) yes yes no > Agent Call Agent Proxy Channel yes yes no > ---------- > 7 channel drivers registered. > > *CLI> module reload chan_zap.so > No such module 'chan_zap.so' > > *CLI>-- Faraz R Khan Chief Architect Emergen Consulting Pvt Ltd +92.21.111.111.320 x200 www.emergen.biz