We have 2 line PBX office that connect to my VoIP Network that contain 2
Asterisk Server each server has FXO Digium. When I make call PBX-to-PBX
via VoIP Network and when done my FXO port still active
||
| |
|PBX|-----|Asterisk 1|-----|-VoIP-|--------|Asterisk 2|------|PBX|
|Network|
| |
||
Is this TDM400 bug or there is something wrong with my zaptel configuration?
Thanks
Mochamad Susantok wrote:> We have 2 line PBX office that connect to my VoIP Network that contain 2 > Asterisk Server each server has FXO Digium. When I make call PBX-to-PBX > via VoIP Network and when done my FXO port still active > > > || > | | > |PBX|-----|Asterisk 1|-----|-VoIP-|--------|Asterisk 2|------|PBX| > |Network| > | | > || > > Is this TDM400 bug or there is something wrong with my zaptel configuration? > ThanksYour PBX is not signaling Asterisk that the line has disconnected. Analog FXS ports on PBX do not generally provide this kind of signaling.
What PBX do you have connected to the Asterisk servers? My experience is that most PBXs do not provide a disconnect signal on their analog station ports. I have had the most success with disconnects on Avaya PBXs. Nortel analog stations last I tested with any, did not provide a disconnect signal. On these other PBXs you will need to use "band-aids" like having zaptel monitor for busy or dial tone when the analog station hangs up. Mike -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070204/cb5eb0f0/attachment.htm