Hi,
Here are the step by step instructions for setting up a brand new Audiocodes
FXS gateway for use with an Asterisk server:
Connect the gateway to a network switch and connect a computer to the same
switch. Then configure the IP address of the computer to 10.1.10.2. Then run
your web browser and point it to http://10.1.10.10 and login using the
information below.
Default IP address: 10.1.10.10
Default user name: Admin
Default password: Admin
Goto "Quick Setup" and change the following:
IP Address => Set to the new IP address of the AudioCodes gateway
Subnet Mask => Set to the correct netmask for your local network
Default Gateway Address => Set to the correct gateway IP address for your
local network
Working With Proxy => Set to "Yes"
Proxy IP Address => Set to the IP address of the Asterisk server
Enable Registration => Set to "Enable"
Restart the gateway then log back in using the new IP address.
Goto Protocol Management -> Protocol Definition -> Proxy &
Registration
Registrar IP Address => Set to the IP address of the Asterisk server
Registration Time => Set to "60"
Subscription Mode => Set to "Per Endpoint"
Authentication Mode => Set to "Per Endpoint"
Goto Protocol Management -> Protocol Definition -> DTMF & Dialing
Max Digits In Phone Num => Set to a large enough number such as
"32"
Goto Protocol Management -> Protocol Definition -> Coders
Add coders as needed You need to set at least G.711U-law
Goto Protocol Management -> Endpoint Settings -> Authentication
Set SIP username and password for each port
Goto Protocol Management -> Endpoint Phone Numbers
Enter an extension (phone) number for every used channel
Your AudioCodes gateway is now ready.
../Arun
arun@intelegentnetworks.com
www.intelegentnetworks.com
On 6/27/06, Mark Adams <admin@infinity-marketing.com>
wrote:>
> Hello,
>
> Anyone here have experience with Audiocodes MediaPack MP-108 Gateways?
>
> I would be willing to pay someone for advice and support with configuring
> my gateways for a telemarketing project I am starting. My experience is
> somewhat limited but all I want to do is make outbound calls just like I
> would on normal pots lines. (That's the best way to explain it) I do
not
> need any special configuration nor am I going to use it for any incoming
> calls. I would like to just have the gateways register and properly send
> calls out and relay DTMF tones. After I get them up and running I should
> have the manual read and digested by then and I will be good to go.
>
>
>
> Anyone interested please email me off list
>
> Mark Adams
> Infinity Marketing
> 216-334-9304
>
>
>
> <http://www.vistaprint.com/vp/gateway.aspx?S=5176697856>
>
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20060627/869ae6b1/attachment.htm