<asterisk-users@lists.digium.com> Hello list, Is there any way to use a2billing without the IVR for the sip/iax users. (authentication is done by the user id and pass as user registers with asterisk). I want to dial the destination number to the asterisk. for example: user dials, exten =>_011.,1,DeadAGI(a2billing) system will connect the destination and bill them. but right now we need to enter the destination followed by the IVR prompts which i dont want. Thanks in advanved if anybody can help me. best regards shaon -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060224/e23fc184/attachment.htm
Asterisk Sales wrote:> <mailto:asterisk-users@lists.digium.com> > > Hello list, > Is there any way to use a2billing without the IVR for the sip/iax users. > (authentication is done by the user id and pass as user registers with > asterisk). > > I want to dial the destination number to the asterisk. for example: > > user dials, > exten =>_011.,1,DeadAGI(a2billing) > > system will connect the destination and bill them. but right now we need > to enter the destination followed by the IVR prompts which i dont want. > > Thanks in advanved if anybody can help me. >Yes, this is all configurable from /etc/asterisk/a2billing.conf If you set use_dnid=YES then a2billing will pick up the destination from the number the user dialled. Set the following to turn off the IVR stuff: ; Play the balance to the user after the authentication (values : yes - no) say_balance_after_auth=NO ; Play the balance to the user after the call (values : yes - no) say_balance_after_call=NO ; Play the time the user can call (values : yes - no) say_timetocall=NO Hope this helps. -- -Barry Flanagan
On Fri, 2006-02-24 at 10:58 +0000, Barry Flanagan wrote:> > Asterisk Sales wrote: > > <mailto:asterisk-users@lists.digium.com> > > > > Hello list, > > Is there any way to use a2billing without the IVR for the sip/iax users. > > (authentication is done by the user id and pass as user registers with > > asterisk). > > > > I want to dial the destination number to the asterisk. for example: > > > > user dials, > > exten =>_011.,1,DeadAGI(a2billing) > > > > system will connect the destination and bill them. but right now we need > > to enter the destination followed by the IVR prompts which i dont want. > > > > Thanks in advanved if anybody can help me. > > > > Yes, this is all configurable from /etc/asterisk/a2billing.conf > > If you set use_dnid=YES then a2billing will pick up the destination from > the number the user dialled. > > Set the following to turn off the IVR stuff: > > ; Play the balance to the user after the authentication (values : yes - no) > say_balance_after_auth=NO > > ; Play the balance to the user after the call (values : yes - no) > say_balance_after_call=NO > > ; Play the time the user can call (values : yes - no) > say_timetocall=NO > > Hope this helps. >Thank you, is working for me right now :)>-- Guillermo Salas M. Telconet S.A. Manta Calle 15 y Av. 24 Esq. Phone : 593 5 262 8071 Mobile: 593 9 985 5138 SIP : 103@sip.manta.telconet.net e-mail: gsalas@manta.telconet.net www : http://www.telconet.net http://www.telcocarrier.net Linux User: 255902 Soporte en Linea en http://www.manta.telconet.net Please avoid sending me Word or PowerPoint attachments. See http://www.fsf.org/philosophy/no-word-attachments.html
Hi how about when trying to call SIP extention to SIP extension Local cal even though its going to out route when i enable SIP_IAX=YES then its IVR in place ask 9 to dial SIP/IAX, if not its dial to international call How can i avoide this check if the user belong to local, dial directly if its international call, go to out route any idea, how can i achieve this ram On 2/26/06, Guillermo Salas M <gsalas@manta.telconet.net> wrote:> > On Fri, 2006-02-24 at 10:58 +0000, Barry Flanagan wrote: > > > > Asterisk Sales wrote: > > > <mailto:asterisk-users@lists.digium.com> > > > > > > Hello list, > > > Is there any way to use a2billing without the IVR for the sip/iax > users. > > > (authentication is done by the user id and pass as user registers with > > > asterisk). > > > > > > I want to dial the destination number to the asterisk. for example: > > > > > > user dials, > > > exten =>_011.,1,DeadAGI(a2billing) > > > > > > system will connect the destination and bill them. but right now we > need > > > to enter the destination followed by the IVR prompts which i dont > want. > > > > > > Thanks in advanved if anybody can help me. > > > > > > > Yes, this is all configurable from /etc/asterisk/a2billing.conf > > > > If you set use_dnid=YES then a2billing will pick up the destination from > > the number the user dialled. > > > > Set the following to turn off the IVR stuff: > > > > ; Play the balance to the user after the authentication (values : yes - > no) > > say_balance_after_auth=NO > > > > ; Play the balance to the user after the call (values : yes - no) > > say_balance_after_call=NO > > > > ; Play the time the user can call (values : yes - no) > > say_timetocall=NO > > > > Hope this helps. > > > > > Thank you, is working for me right now :) > > > > -- > Guillermo Salas M. > Telconet S.A. Manta > Calle 15 y Av. 24 Esq. > Phone : 593 5 262 8071 > Mobile: 593 9 985 5138 > SIP : 103@sip.manta.telconet.net > e-mail: gsalas@manta.telconet.net > www : http://www.telconet.net > http://www.telcocarrier.net > > Linux User: 255902 > Soporte en Linea en http://www.manta.telconet.net > > Please avoid sending me Word or PowerPoint attachments. > See http://www.fsf.org/philosophy/no-word-attachments.html > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >-------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060301/1ae7c59f/attachment.htm
ram wrote:> Hi > > > how about when trying to call SIP extention to SIP extension > Local cal > > even though its going to out route > > when i enable SIP_IAX=YES > > then its IVR in place ask 9 to dial SIP/IAX, if not its dial to > international call > How can i avoide this > > check if the user belong to local, dial directly > if its international call, go to out route > > any idea, how can i achieve this >Sure, just do this in your dialplan. In the a2billing context, list your local extentions first, then the a2billing ones. If the caller is calling a local extension this will get picked up instead of a2billing. I do it like this: 1. Create the a2billing context: [a2billing] exten => s,1,Answer exten => s,2,Wait,2 exten => s,3,DeadAGI(a2billing.php|1) exten => s,4,Wait,2 exten => s,5,Hangup 2. Create your local extensions context: [local] 8001 => .... 8002 => .... etc. 3. Create the actual context that you send users into, which does an include of the [local] and [a2billing] contexts: [a2users] include => local include => a2billing Now, local calls will not go anywhere near a2billing. Hope this helps. -Barry> ram > > > On 2/26/06, *Guillermo Salas M* <gsalas@manta.telconet.net > <mailto:gsalas@manta.telconet.net>> wrote: > > On Fri, 2006-02-24 at 10:58 +0000, Barry Flanagan wrote: > > > > Asterisk Sales wrote: > > > <mailto: asterisk-users@lists.digium.com > <mailto:asterisk-users@lists.digium.com>> > > > > > > Hello list, > > > Is there any way to use a2billing without the IVR for the > sip/iax users. > > > (authentication is done by the user id and pass as user > registers with > > > asterisk). > > > > > > I want to dial the destination number to the asterisk. for example: > > > > > > user dials, > > > exten =>_011.,1,DeadAGI(a2billing) > > > > > > system will connect the destination and bill them. but right > now we need > > > to enter the destination followed by the IVR prompts which i > dont want. > > > > > > Thanks in advanved if anybody can help me. > > > > > > > Yes, this is all configurable from /etc/asterisk/a2billing.conf > > > > If you set use_dnid=YES then a2billing will pick up the > destination from > > the number the user dialled. > > > > Set the following to turn off the IVR stuff: > > > > ; Play the balance to the user after the authentication (values : > yes - no) > > say_balance_after_auth=NO > > > > ; Play the balance to the user after the call (values : yes - no) > > say_balance_after_call=NO > > > > ; Play the time the user can call (values : yes - no) > > say_timetocall=NO > > > > Hope this helps. > > > > > Thank you, is working for me right now :) > > > > -- > Guillermo Salas M. > Telconet S.A. Manta > Calle 15 y Av. 24 Esq. > Phone : 593 5 262 8071 > Mobile: 593 9 985 5138 > SIP : 103@sip.manta.telconet.net <mailto:103@sip.manta.telconet.net> > e-mail: gsalas@manta.telconet.net <mailto:gsalas@manta.telconet.net> > www : http://www.telconet.net > http://www.telcocarrier.net <http://www.telcocarrier.net> > > Linux User: 255902 > Soporte en Linea en http://www.manta.telconet.net > > Please avoid sending me Word or PowerPoint attachments. > See http://www.fsf.org/philosophy/no-word-attachments.html > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com > <http://Easynews.com> -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > ------------------------------------------------------------------------ > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users-- -Barry Flanagan