Hi, I just want to inquire which of the available h323 modules for asterisk is more stable and better quality. My boss asked me to setup asterisk with and I am having a hard time choosing which one should I used. Any advice and suggestion will be greatly appreciated Thanks in advance! Leonimar __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com
leonimar cape wrote:> Hi, > > I just want to inquire which of the available h323 > modules for asterisk is more stable and better > quality. My boss asked me to setup asterisk with and I > am having a hard time choosing which one should I > used. > > Any advice and suggestion will be greatly appreciated >I have used 0h323 from inAccess Networks, you compile first h323 then asterisk-oh323. you must use the correct version though, read the README. It worked well for me. has support for all codecs I have also used the new ooh323 that comes bundled witj asterisk-addons. You go into asterisk-addons directoryu and compoile ooh323. Also has worked well. But this one, as of 1.2.4, only has support for ulaw and alaw and gsm i think. CVS (or SVN) has now support for g72* both are configured very similiar in oh323.conf and ooh323.conf respectivley yusuf
Thanks for the info yusuf... Im gonna check it out... Cheers! --- yusuf <yusuf@ecntelecoms.com> wrote:> leonimar cape wrote: > > Hi, > > > > I just want to inquire which of the available h323 > > modules for asterisk is more stable and better > > quality. My boss asked me to setup asterisk with > and I > > am having a hard time choosing which one should I > > used. > > > > Any advice and suggestion will be greatly > appreciated > > > I have used 0h323 from inAccess Networks, you > compile first h323 then > asterisk-oh323. you must use the correct version > though, read the > README. It worked well for me. has support for all > codecs > > I have also used the new ooh323 that comes bundled > witj asterisk-addons. > You go into asterisk-addons directoryu and compoile > ooh323. Also has > worked well. But this one, as of 1.2.4, only has > support for ulaw and > alaw and gsm i think. CVS (or SVN) has now support > for g72* > > both are configured very similiar in oh323.conf and > ooh323.conf respectivley > > yusuf > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com > -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > >http://lists.digium.com/mailman/listinfo/asterisk-users>__________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com
Hi Can asterisk work as sip and h323 protocol in the same time ,and how is the conversion protocol works . Please if u know send me how to active h323 protocol or the conversion protocol Regards ********************************************* No employee or agent is authorized to conclude any binding agreement on behalf of Xplorium with another party by e-mail without express written confirmation by an officer of Xplorium. Any views expressed by an individual in this electronic message do not necessarily reflect views of Xplorium or its subsidiaries and associates. This electronic message and its attachments are solely addressed to the addressee(s), and contain confidential information protected from disclosure belonging to Xplorium. If you are not the intended addressee of this electronic message and its attachments, kindly delete it immediately from your system and notify the sender by electronic mail. You must not copy this message or attachment or disclose its content to any other person. Xplorium does not guarantee the integrity of this electronic message and any of its attachments, or that they are free from computer viruses or other defects. ********************************************* -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060620/7d7e2249/attachment.htm
You can do this by installing a h323 module. Conversion works simetimes good, sometimes not good. H323 behaviour on asterosk with my experience with kind of unpredictable. 2006/6/20, Khaled Chehab <kchehab@xplorium.com>:> > Hi > > Can asterisk work as sip and h323 protocol in the same time ,and how is > the conversion protocol works . > > Please if u know send me how to active h323 protocol or the conversion > protocol > > > > > > > > Regards > > > ------------------------------ > ********************************************* > No employee or agent is authorized to conclude any binding agreement on > behalf of Xplorium with another party by e-mail without express written > confirmation by an officer of Xplorium. Any views expressed by an individual > in this electronic message do not necessarily reflect views of Xplorium or > its subsidiaries and associates. > > This electronic message and its attachments are solely addressed to the > addressee(s), and contain confidential information protected from disclosure > belonging to Xplorium. > > If you are not the intended addressee of this electronic message and its > attachments, kindly delete it immediately from your system and notify the > sender by electronic mail. You must not copy this message or attachment or > disclose its content to any other person. > > Xplorium does not guarantee the integrity of this electronic message and > any of its attachments, or that they are free from computer viruses or other > defects. > ********************************************* > > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com <http://easynews.com/>-- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > >-- Hakem Voip -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060620/50671776/attachment.htm
Im using several Asterisk Box with chanh323 from asterisk, and it works fine. Sometime it gets deadlocks , but on 1.2.9.1 and 1.2.7 i have estability. A fail (crash) last month with about 600 calls per day. Regards Alberto Sagredo hakem voip escribi?:> You can do this by installing a h323 module. > > Conversion works simetimes good, sometimes not good. H323 behaviour on > asterosk with my experience with kind of unpredictable. > > > 2006/6/20, Khaled Chehab <kchehab@xplorium.com > <mailto:kchehab@xplorium.com>>: > > Hi > > Can asterisk work as sip and h323 protocol in the same time ,and > how is the conversion protocol works . > > Please if u know send me how to active h323 protocol or the > conversion protocol > > > > > > > > Regards > > > > ------------------------------------------------------------------------ > ********************************************* > No employee or agent is authorized to conclude any binding > agreement on behalf of Xplorium with another party by e-mail > without express written confirmation by an officer of Xplorium. > Any views expressed by an individual in this electronic message do > not necessarily reflect views of Xplorium or its subsidiaries and > associates. > > This electronic message and its attachments are solely addressed > to the addressee(s), and contain confidential information > protected from disclosure belonging to Xplorium. > > If you are not the intended addressee of this electronic message > and its attachments, kindly delete it immediately from your system > and notify the sender by electronic mail. You must not copy this > message or attachment or disclose its content to any other person. > > Xplorium does not guarantee the integrity of this electronic > message and any of its attachments, or that they are free from > computer viruses or other defects. > ********************************************* > > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com > <http://easynews.com/> -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > -- > Hakem Voip > ------------------------------------------------------------------------ > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
Hi, I am also testing asterisk with H323, with the channel included in the latest sources. It works ( i had some problems with media configuration when calling from an SJPhone ... but it seems more an SJPhone problem than asterisk). I also bridged from SIP to H323 ... it works fine. I have a question for those out there ... i compiled with pwlib 1.9.2 and openh323 1.17.3. These are the versions mentioned in the README file for the h323 channel. Now, has anyone tried any newer version? I would be more comfortable using the latest stable release for these required libraries with asterisk ... just to make sure i get the best. Any experiences?? Cesc On 6/20/06, Alberto Sagredo <asagredo@peoplecall.com> wrote:> Im using several Asterisk Box with chanh323 from asterisk, and it works > fine. > > Sometime it gets deadlocks , but on 1.2.9.1 and 1.2.7 i have estability. > A fail (crash) last month with about 600 calls per day. > > Regards > > Alberto Sagredo > > > hakem voip escribi?: > > You can do this by installing a h323 module. > > > > Conversion works simetimes good, sometimes not good. H323 behaviour on > > asterosk with my experience with kind of unpredictable. > > > > > > 2006/6/20, Khaled Chehab <kchehab@xplorium.com > > <mailto:kchehab@xplorium.com>>: > > > > Hi > > > > Can asterisk work as sip and h323 protocol in the same time ,and > > how is the conversion protocol works . > > > > Please if u know send me how to active h323 protocol or the > > conversion protocol > > > > > > > > > > > > > > > > Regards > > > > > > > > ------------------------------------------------------------------------ > > ********************************************* > > No employee or agent is authorized to conclude any binding > > agreement on behalf of Xplorium with another party by e-mail > > without express written confirmation by an officer of Xplorium. > > Any views expressed by an individual in this electronic message do > > not necessarily reflect views of Xplorium or its subsidiaries and > > associates. > > > > This electronic message and its attachments are solely addressed > > to the addressee(s), and contain confidential information > > protected from disclosure belonging to Xplorium. > > > > If you are not the intended addressee of this electronic message > > and its attachments, kindly delete it immediately from your system > > and notify the sender by electronic mail. You must not copy this > > message or attachment or disclose its content to any other person. > > > > Xplorium does not guarantee the integrity of this electronic > > message and any of its attachments, or that they are free from > > computer viruses or other defects. > > ********************************************* > > > > > > _______________________________________________ > > --Bandwidth and Colocation provided by Easynews.com > > <http://easynews.com/> -- > > > > Asterisk-Users mailing list > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > > > > > > > -- > > Hakem Voip > > ------------------------------------------------------------------------ > > > > _______________________________________________ > > --Bandwidth and Colocation provided by Easynews.com -- > > > > Asterisk-Users mailing list > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
> Hi > > How Can asterisk work as sip and h323 protocol in the same time ,and howis> the > conversion protocol works . > > Please if u know send me how to active h323 protocol or the conversion > protocol >********************************************* No employee or agent is authorized to conclude any binding agreement on behalf of Xplorium with another party by e-mail without express written confirmation by an officer of Xplorium. Any views expressed by an individual in this electronic message do not necessarily reflect views of Xplorium or its subsidiaries and associates. This electronic message and its attachments are solely addressed to the addressee(s), and contain confidential information protected from disclosure belonging to Xplorium. If you are not the intended addressee of this electronic message and its attachments, kindly delete it immediately from your system and notify the sender by electronic mail. You must not copy this message or attachment or disclose its content to any other person. Xplorium does not guarantee the integrity of this electronic message and any of its attachments, or that they are free from computer viruses or other defects. *********************************************