thr3ads.net - asterisk users - [Asterisk-Users] Dialplan help [Nov 2005]

If this information is useful, please help other people find it:
Share via:

2005-Nov-27 04:57 UTC

[Asterisk-Users] Dialplan help

hi,

can anyone please guide me as to how i can implement this in extensions.conf
:

my PSTN line normally has its longdistance capability "locked" which
can be
opened by dialing some keys and the PIN.

if i wanted some users to be allowed to call long distance using the zap
channel, how can i initially offhook then send some DTMF then Flash twice
before proceeding with the dialing EXTEN.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20051127/5a70e86f/attachment.htm

Steve Totaro

2005-Nov-27 06:37 UTC

head link

[Asterisk-Users] Dialplan help

> 
> hi,
> 
> can anyone please guide me as to how i can implement this in
> extensions.conf:
> 
> my PSTN line normally has its longdistance capability "locked"
which
can> be opened by dialing some keys and the PIN.
> 
> if i wanted some users to be allowed to call long distance using the
zap> channel, how can i initially offhook then send some DTMF then Flash
twice> before proceeding with the dialing EXTEN.

Do you want asterisk to take care of the DTMF for you?  When you say
users, do you mean certain extensions?  

Why not cancel your restrictions with the telco and implement
restrictions within asterisk.  You can use authenticate before your dial
statement to prompt for a pin when dialing long distance or you can
create different contexts for phones that you want to access long
distance and for phones that you don't

Thanks,
Steve

Steve Totaro

2005-Nov-27 10:06 UTC

head link

[Asterisk-Users] Dialplan help

How about this?

exten => 1234567890,1,Dial(Zap/g1/yourcodehere${EXTEN})
-or-
exten => 1234567890,1,Dial(Zap/g1/yourcodeherewwww${EXTEN})

I have not seen restrictions set before dialing since local numbers
would not fall under the restriction but that is what you said.  Usually
you dial the number first and if it is a long distance call, they prompt
for a code with a tone or something.  The second example shoud give you
a two second pause before dialing the rest of the number (wwww).

Thanks,
Steve

> 
> thanks steve,
> 
> the reason i cannot remove the restriction on the telco line is that
an> analog fone is connected to the phone jack of the x101p and some
visitors> occasionally use the fone and they're supposed to only call local toll
> free numbers.
> 
> Your suggestion of doing the restrictions within asterisk is good but
i> have yet to buy an FXS port for the analog fone so i cannot do so.
> 
> and for the extensions connected via softphones to asterisk, i wanted
> asterisk to take care of opening the lock before dialing the desired
phone> number.
> 
> i was thinking of using the "SendDTMF" but i dont know how to get
the
zap> line go off hook.
> 
> 
> On 11/27/05, Steve Totaro < stotaro@totarotechnologies.com
> <mailto:stotaro@totarotechnologies.com> > wrote:
> 
> 	>
> 	> hi,
> 	>
> 	> can anyone please guide me as to how i can implement this in
> 	> extensions.conf:
> 	>
> 	> my PSTN line normally has its longdistance capability
"locked"
> which
> 	can
> 	> be opened by dialing some keys and the PIN.
> 	>
> 	> if i wanted some users to be allowed to call long distance
using> the
> 	zap
> 	> channel, how can i initially offhook then send some DTMF then
> Flash
> 	twice
> 	> before proceeding with the dialing EXTEN.
> 
> 
> 	Do you want asterisk to take care of the DTMF for you?  When you
say> 	users, do you mean certain extensions?
> 
> 	Why not cancel your restrictions with the telco and implement
> 	restrictions within asterisk.  You can use authenticate before
your> dial
> 	statement to prompt for a pin when dialing long distance or you
can> 	create different contexts for phones that you want to access
long> 	distance and for phones that you don't
> 
> 	Thanks,
> 	Steve
> 	_______________________________________________
> 	--Bandwidth and Colocation provided by Easynews.com --
> 
> 	Asterisk-Users mailing list
> 	To UNSUBSCRIBE or update options visit:
> 	   http://lists.digium.com/mailman/listinfo/asterisk-users
> 
>

Steve Totaro

2005-Nov-27 11:10 UTC

head link

[Asterisk-Users] Dialplan help

Wow, what a pain.  I would just pickup an FXS and be done with it.  
> 
> 
> Thanks Steve,
> 
> But this will not work for me because after "yourcodehere" the
line
will> give a confirmation tone (similar to a congestion tone only faster)
then> after flashing or certain period will turn into a busytone and to get
the> dialtone again i need to Flash again before i can dial ${EXTEN}.
> 
> 
> 
> On 11/28/05, Steve Totaro <stotaro@totarotechnologies.com> wrote:
> 
> 	How about this?
> 
> 	exten => 1234567890,1,Dial(Zap/g1/yourcodehere${EXTEN})
> 	-or-
> 	exten => 1234567890,1,Dial(Zap/g1/yourcodeherewwww${EXTEN})
> 
> 	I have not seen restrictions set before dialing since local
numbers> 	would not fall under the restriction but that is what you said.
> Usually
> 	you dial the number first and if it is a long distance call,
they> prompt
> 	for a code with a tone or something.  The second example shoud
give> you
> 	a two second pause before dialing the rest of the number (wwww).
> 
> 	Thanks,
> 	Steve
> 
> 
> 	>
> 	> thanks steve,
> 	>
> 	> the reason i cannot remove the restriction on the telco line
is> that
> 	an
> 	> analog fone is connected to the phone jack of the x101p and
some> 	visitors
> 	> occasionally use the fone and they're supposed to only call
local> toll
> 	> free numbers.
> 	>
> 	> Your suggestion of doing the restrictions within asterisk is
good> but
> 	i
> 	> have yet to buy an FXS port for the analog fone so i cannot do
so.> 	>
> 	> and for the extensions connected via softphones to asterisk, i
> wanted
> 	> asterisk to take care of opening the lock before dialing the
> desired
> 	phone
> 	> number.
> 	>
> 	> i was thinking of using the "SendDTMF" but i dont know how
to
get> the
> 	zap
> 	> line go off hook.
> 	>
> 	>
> 	> On 11/27/05, Steve Totaro < stotaro@totarotechnologies.com
> <mailto:stotaro@totarotechnologies.com>
> 	> <mailto:stotaro@totarotechnologies.com> > wrote:
> 	>
> 	>       >
> 	>       > hi,
> 	>       >
> 	>       > can anyone please guide me as to how i can implement
this> in
> 	>       > extensions.conf:
> 	>       >
> 	>       > my PSTN line normally has its longdistance capability
> "locked"
> 	> which
> 	>       can
> 	>       > be opened by dialing some keys and the PIN.
> 	>       >
> 	>       > if i wanted some users to be allowed to call long
distance> 	using
> 	> the
> 	>       zap
> 	>       > channel, how can i initially offhook then send some
DTMF> then
> 	> Flash
> 	>       twice
> 	>       > before proceeding with the dialing EXTEN.
> 	>
> 	>
> 	>       Do you want asterisk to take care of the DTMF for you?
When> you
> 	say
> 	>       users, do you mean certain extensions?
> 	>
> 	>       Why not cancel your restrictions with the telco and
> implement
> 	>       restrictions within asterisk.  You can use authenticate
> before
> 	your
> 	> dial
> 	>       statement to prompt for a pin when dialing long distance
or> you
> 	can
> 	>       create different contexts for phones that you want to
access> 	long
> 	>       distance and for phones that you don't
> 	>
> 	>       Thanks,
> 	>       Steve

Steve Totaro

2005-Nov-27 11:22 UTC

head link

[Asterisk-Users] Dialplan help

This might work if you switch it around a little.

http://www.voip-info.org/wiki-Asterisk+cmd+Flash
> -----Original Message-----
> From: MZ [mailto:ultor_forum@jefmart.com]
> Sent: Sunday, November 27, 2005 12:54 PM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [Asterisk-Users] Dialplan help
> 
> 
> Thanks Steve,
> 
> But this will not work for me because after "yourcodehere" the
line
will> give a confirmation tone (similar to a congestion tone only faster)
then> after flashing or certain period will turn into a busytone and to get
the> dialtone again i need to Flash again before i can dial ${EXTEN}.
> 
> 
> 
> On 11/28/05, Steve Totaro <stotaro@totarotechnologies.com> wrote:
> 
> 	How about this?
> 
> 	exten => 1234567890,1,Dial(Zap/g1/yourcodehere${EXTEN})
> 	-or-
> 	exten => 1234567890,1,Dial(Zap/g1/yourcodeherewwww${EXTEN})
> 
> 	I have not seen restrictions set before dialing since local
numbers> 	would not fall under the restriction but that is what you said.
> Usually
> 	you dial the number first and if it is a long distance call,
they> prompt
> 	for a code with a tone or something.  The second example shoud
give> you
> 	a two second pause before dialing the rest of the number (wwww).
> 
> 	Thanks,
> 	Steve
> 
> 
> 	>
> 	> thanks steve,
> 	>
> 	> the reason i cannot remove the restriction on the telco line
is> that
> 	an
> 	> analog fone is connected to the phone jack of the x101p and
some> 	visitors
> 	> occasionally use the fone and they're supposed to only call
local> toll
> 	> free numbers.
> 	>
> 	> Your suggestion of doing the restrictions within asterisk is
good> but
> 	i
> 	> have yet to buy an FXS port for the analog fone so i cannot do
so.> 	>
> 	> and for the extensions connected via softphones to asterisk, i
> wanted
> 	> asterisk to take care of opening the lock before dialing the
> desired
> 	phone
> 	> number.
> 	>
> 	> i was thinking of using the "SendDTMF" but i dont know how
to
get> the
> 	zap
> 	> line go off hook.
> 	>
> 	>
> 	> On 11/27/05, Steve Totaro < stotaro@totarotechnologies.com
> <mailto:stotaro@totarotechnologies.com>
> 	> <mailto:stotaro@totarotechnologies.com> > wrote:
> 	>
> 	>       >
> 	>       > hi,
> 	>       >
> 	>       > can anyone please guide me as to how i can implement
this> in
> 	>       > extensions.conf:
> 	>       >
> 	>       > my PSTN line normally has its longdistance capability
> "locked"
> 	> which
> 	>       can
> 	>       > be opened by dialing some keys and the PIN.
> 	>       >
> 	>       > if i wanted some users to be allowed to call long
distance> 	using
> 	> the
> 	>       zap
> 	>       > channel, how can i initially offhook then send some
DTMF> then
> 	> Flash
> 	>       twice
> 	>       > before proceeding with the dialing EXTEN.
> 	>
> 	>
> 	>       Do you want asterisk to take care of the DTMF for you?
When> you
> 	say
> 	>       users, do you mean certain extensions?
> 	>
> 	>       Why not cancel your restrictions with the telco and
> implement
> 	>       restrictions within asterisk.  You can use authenticate
> before
> 	your
> 	> dial
> 	>       statement to prompt for a pin when dialing long distance
or> you
> 	can
> 	>       create different contexts for phones that you want to
access> 	long
> 	>       distance and for phones that you don't
> 	>
> 	>       Thanks,
> 	>       Steve
> 	>       _______________________________________________
> 	>       --Bandwidth and Colocation provided by Easynews.com --
> 	>
> 	>       Asterisk-Users mailing list
> 	>       To UNSUBSCRIBE or update options visit:
> 	>
http://lists.digium.com/mailman/listinfo/asterisk-users> 	>
> 	>
> 
> 	_______________________________________________
> 	--Bandwidth and Colocation provided by Easynews.com --
> 
> 	Asterisk-Users mailing list
> 	To UNSUBSCRIBE or update options visit:
> 	   http://lists.digium.com/mailman/listinfo/asterisk-users
> 
>

vivek@staff.ownmail.com

2006-Aug-30 01:53 UTC

head link

[asterisk-users] dialplan help

Dear friends,
  Does anyone know how do i convert hex to int in the dialplan. I want to do
this:-
Take the sip call-id in hex, use CUT to extract the first part , and convert it
to an int. But the math function ony takes arguments as int. Can anyone suggest
how to do that?
eg:- 
exten => _X.,n,Set(sipcid = ${CUT(SIPCALLID,-,1)})  ---> evaluates to
E305CEC5
I want this hex value in int. But i cant think of a clean solution. 
Please help.

Thanks in advance.





With warm regards.

Vivek J. Joshi.

vivek@staff.ownmail.com
Trikon electronics Pvt. Ltd.

All science is either physics or stamp collecting.
                -- Ernest Rutherford

Michiel van Baak

2006-Aug-30 07:55 UTC

head link

[asterisk-users] dialplan help

On 14:23, Wed 30 Aug 06, vivek@staff.ownmail.com wrote:> Dear friends,
>   Does anyone know how do i convert hex to int in the dialplan. I want to
do this:-
> Take the sip call-id in hex, use CUT to extract the first part , and
convert it to an int. But the math function ony takes arguments as int. Can
anyone suggest how to do that?
> eg:- 
> exten => _X.,n,Set(sipcid = ${CUT(SIPCALLID,-,1)})  ---> evaluates to
E305CEC5
> I want this hex value in int. But i cant think of a clean solution. 
> Please help.
> 
Use a simple agi script that does this for you.

-- 
Michiel van Baak
michiel@vanbaak.eu
http://michiel.vanbaak.eu
GnuPG key: http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x71C946BD

"Why is it drug addicts and computer afficionados are both called
users?"

vivek@staff.ownmail.com

2006-Aug-30 09:27 UTC

head link

[asterisk-users] dialplan help

Hi Michael,
 Thanks a lot. I am working on an agi script and it does it. Thanks a lot again.




With warm regards.

Vivek J. Joshi.

vivek@staff.ownmail.com
Trikon electronics Pvt. Ltd.

All science is either physics or stamp collecting.
                -- Ernest Rutherford



Michiel van Baak wrote:> >On 14:23, Wed 30 Aug 06, vivek@staff.ownmail.com wrote:
>> Dear friends,
>>   Does anyone know how do i convert hex to int in the dialplan. I want
to do
this:->> Take the sip call-id in hex, use CUT to extract the first part , and
convertit to an int. But the math function ony takes arguments as int. Can anyone 
suggest how to do that?>> eg:- 
>> exten => _X.,n,Set(sipcid = ${CUT(SIPCALLID,-,1)})  --->
evaluates to E305CEC5
>> I want this hex value in int. But i cant think of a clean solution. 
>> Please help.
>> 
>
>Use a simple agi script that does this for you.
>
>-- 
>Michiel van Baak
>michiel@vanbaak.eu
>http://michiel.vanbaak.eu
>GnuPG key: http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x71C946BD
>
>"Why is it drug addicts and computer afficionados are both called
users?"
>
>_______________________________________________
>--Bandwidth and Colocation provided by Easynews.com --
>
>asterisk-users mailing list
>To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users

asterisk users - Nov 2005 - Dialplan help

[Asterisk-Users] Dialplan help

[Asterisk-Users] Dialplan help

[Asterisk-Users] Dialplan help

[Asterisk-Users] Dialplan help

[Asterisk-Users] Dialplan help

[asterisk-users] dialplan help

[asterisk-users] dialplan help

[asterisk-users] dialplan help