Julian Lyndon-Smith
2005-Nov-09 12:41 UTC
[Asterisk-Users] Zaptel Outbound Caller ID on E1 in UK
We had to call BT and apply for CallerID to be enabled on our DDI range. Julian. Matt King wrote:> Hello, > > We've got a shiny new TE411P hooked up to four E1s at a carrier (not > BT) here in the UK. Everything's working great, except that we can't > seem to work out how to set caller ID on outgoing calls. When I dial > out to my mobile, the caller id is shown as the pilot number of the > range we've got assigned to *, whatever we seem to do. We really need > to be able to set this arbitrarily, and/or to the caller ID of incoming > calls when bridging. > > Any help would be greatly appreciated. Here's our conf so far... > > zaptel.conf: > > span=1,1,0,ccs,hdb3,crc4,yellow > span=2,2,0,ccs,hdb3,crc4,yellow > span=3,3,0,ccs,hdb3,crc4,yellow > span=4,4,0,ccs,hdb3,crc4,yellow > > bchan=1-15,17-31 > dchan=16 > bchan=32-46,48-62 > dchan=47 > bchan=63-77,79-93 > dchan=78 > bchan=94-108,110-124 > dchan=109 > loadzone = uk > defaultzone=uk > > zapata.conf: > > [channels] > context=orderlyq > switchtype=euroisdn > pridialplan=local > prilocaldialplan=local > signalling=pri_cpe > rxwink=300 > usecallerid=yes > cidsignalling=v23 > cidstart=polarity > hidecallerid=no > callwaiting=yes > usecallingpres=yes > sendcalleridafter=1 > callwaitingcallerid=yes > threewaycalling=yes > transfer=yes > cancallforward=yes > callreturn=yes > echocancel=yes > rxgain=0.0 > txgain=0.0 > group=1 > callgroup=1 > pickupgroup=1 > immediate=no > callprogress=no > callerid=asreceived > channel => 1-15,17-31 > > extensions.conf: > exten => 1000,1,Dial(ZAP/g1/07743898503|20) > > Thanks in advance... > > Matt King, M.A. Oxon. > Managing Director, Orderly Software Ltd. > 01392 421 078 or 0774 38 98 503 > http://www.orderlyq.com - the world's most advanced queue system. > > > _______________________________________________ > --Bandwidth and Colocation sponsored by Easynews.com -- > > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > >
Hello, We've got a shiny new TE411P hooked up to four E1s at a carrier (not BT) here in the UK. Everything's working great, except that we can't seem to work out how to set caller ID on outgoing calls. When I dial out to my mobile, the caller id is shown as the pilot number of the range we've got assigned to *, whatever we seem to do. We really need to be able to set this arbitrarily, and/or to the caller ID of incoming calls when bridging. Any help would be greatly appreciated. Here's our conf so far... zaptel.conf: span=1,1,0,ccs,hdb3,crc4,yellow span=2,2,0,ccs,hdb3,crc4,yellow span=3,3,0,ccs,hdb3,crc4,yellow span=4,4,0,ccs,hdb3,crc4,yellow bchan=1-15,17-31 dchan=16 bchan=32-46,48-62 dchan=47 bchan=63-77,79-93 dchan=78 bchan=94-108,110-124 dchan=109 loadzone = uk defaultzone=uk zapata.conf: [channels] context=orderlyq switchtype=euroisdn pridialplan=local prilocaldialplan=local signalling=pri_cpe rxwink=300 usecallerid=yes cidsignalling=v23 cidstart=polarity hidecallerid=no callwaiting=yes usecallingpres=yes sendcalleridafter=1 callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes echocancel=yes rxgain=0.0 txgain=0.0 group=1 callgroup=1 pickupgroup=1 immediate=no callprogress=no callerid=asreceived channel => 1-15,17-31 extensions.conf: exten => 1000,1,Dial(ZAP/g1/07743898503|20) Thanks in advance... Matt King, M.A. Oxon. Managing Director, Orderly Software Ltd. 01392 421 078 or 0774 38 98 503 http://www.orderlyq.com - the world's most advanced queue system.