asterisk users - Apr 2005 - zaptel.conf digium and quadBri together (e1 and isdn together)

Hello,
 
 I have a machine with two cards installed, one digium that gives e1
connectivity and one quadBri for the ISDN line.
 
  I can use them independently. I have one zaptel.conf and one zapata.conf for
each card. I would like to work with them at the same time and I am not sure
about how could I do it (if it is possible!). My first attempt wasn't very
successful. I made the config files getting the info from the one for isdn and
the one for e1. Ztcfg configures the 136 channels without problems but I
can't use the e1 channel. A curious thing is that, with the same
configuration, I can use the e1 channel.

Any help/suggestion is more than welcome.

Thanks.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20050407/c277333d/attachment.htm

Hello Victor:

Are you using the QuadBRI from Junghanns?

If so, this is a configuration that works for me in the UK, one single 
E1 board and the QuadBRI.  As I recall, the order of loading is 
important (see way below):

ZAPTEL.CONF

loadzone=nl
defaultzone=nl

# qozap span definitions
# most of the values should be bogus because we are not really zaptel
span=1,1,3,ccs,ami
span=2,0,3,ccs,ami
span=3,0,3,ccs,ami
span=4,0,3,ccs,ami

# E1 definition:
span=5,0,0,ccs,hdb3,crc4

#BRI's:
bchan=1,2
dchan=3
bchan=4,5
dchan=6
bchan=7,8
dchan=9
bchan=10,11
dchan=12

#E1:
bchan=13-27,29-43
dchan=28
---------------------------------------------------------------------------------------------

ZAPATA.CONF

[channels]
;
; Default language
;
;language=en
;
; Default context
;
;
switchtype = euroisdn

; p2mp TE mode (for connecting ISDN lines in point-to-multipoint mode)
signalling = bri_cpe_ptmp

; define 4 BRI's:
pridialplan = unknown
prilocaldialplan = unknown
echocancel = yes
context=incoming
group = 1
channel => 1-2
group = 2
channel => 4-5
group = 3
channel => 7-8
group = 4
channel => 10-11
group = 9

;and the E1
pridialplan = unknown
signalling=pri_net               <- this is because I'm connecting to a 
Dialogic board
                              in another system, not the PSTN.. Would 
normally be pri_cpe
channel => 13-27,29-43
---------------------------------------------------------------------------------------------

IN YOUR SYSTEM REBOOT ROUTINE:

#following for Quad BRI system:
cd /usr/src/bri/bri-stuff.0.1.0-RC2g/qozap
modprobe -v zaptel >>/var/log/asterisk/modprobe.log
sleep 1
insmod -v qozap.o >>/var/log/asterisk/modprobe.log
sleep 1

# following for single E1 system
modprobe -v wct1xxp >>/var/log/asterisk/modprobe.log
sleep 4

#ztcfg -vv >>/var/log/asterisk/modprobe.log       <- NOTE THAT ztcfg 
commented out, Junghanns issue
#sleep 3

startast

sleep 3

GOOD LUCK
Scott Stingel

www.evtmedia.com

-------------------------------------------------


Victor Alvarez wrote:
> Hello,
>
>  I have a machine with two cards installed, one digium that gives e1 
> connectivity and one quadBri for the ISDN line.
>  
>   I can use them independently. I have one zaptel.conf and one 
> zapata.conf for each card. I would like to work with them at the same 
> time and I am not sure about how could I do it (if it is possible!). 
> My first attempt wasn't very successful. I made the config 
> files getting the info from the one for isdn and the one for e1. Ztcfg 
> configures the 136 channels without problems but I can't use the e1 
> channel. A curious thing is that, with the same configuration, I can 
> use the e1 channel.
>  
> Any help/suggestion is more than welcome.
>  
> Thanks.
>  
>
>
>------------------------------------------------------------------------
>
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users@lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>