Jeremy Gehris
2004-Dec-17 16:08 UTC
[Asterisk-Users] Call Queue Uniden UIP 200 not working
I just got my wife this phone, and when calls come in on the queue it will not ring, if I dial the ext it rings, here is the config from the tftp server: Thanks unidencom.txt # UIP200 Mass Configuration System Generic File # Notes: # 1. Lines start with '#' are comments # 2. To leave a field value unchanged (as saved on local phone), leave value to blank. # 3. To set a field's value to empty, use '-' as value. # 4. To NOT overwrite user local settings of: programmable key, one/two touch keys, VMA # number, VMWILampIndicator, set "OverwriteLocalSetting = NO". Default is "YES". This # key will ALSO affect whether or not THESE settings in uniden<MAC>.txt be used. # 5. Any duplicate parameters exist in both unidencom.txt and uniden<MAC>.txt, MAC settings # will be used. # MAXIMUM FILE SIZE IS 10KB # Current Limitation: No spaces allowed for a setting's value # Version: 4.59a #Overwrite user local settings of programmable keys, one/two touch keys, vma settings #If set to no, these current settings on the phone will not be overwritten. OverwriteLocalSettings YES # must be placed on top of config file # Sip Settings --If only ProxyServer needed, set OutboundProxy1/Port same as ProxyServer/Port ProxyServer 192.168.5.117 # can be an IP address or FDQN ProxyServerPort 5060 # 0 to use default port OutboundProxy1 192.168.5.117 # can be an IP address or FQDN OutboundProxy1Port 5060 # enter a port number or 0 for default (5060) OutboundProxy2 192.168.5.117 # can be an IP address or FQDN OutboundProxy2Port 5060 # enter a port number or 0 for default (5060) EmergencyProxy 192.168.5.117 EmergencyProxyPort 5060 Registrar1 192.168.5.117 # can be an IP address or FQDN Registrar1Port 5060 # enter a port number or 0 for default (5060) Registrar2 192.168.5.117 # can be an IP address or FQDN Registrar2Port 5060 # enter a port number or 0 for default (5060) #DnsServer_1 10.0.0.13 # may not be necessary if use DHCP #DnsServer_2 151.165.11.201 # may not be necessary if use DHCP RegisterExpireSec 3600 RegisterRetrySec 90RegisterExpireLimitPercent 10 FailoverRetrySec 8 SipPort 5060 SRVRecordName - #_sip._udp.unisip.com # options are ON or OFF SessionTimerSupport ON # options are ON or OFF SessionTimerRefresher ON SessionTimerMin 60 TimerInterval0 300 TimerInterval1 150 # Audio Settings G711MuTxPacketLength 20 G711MuJitterBufferLength 10 G711MuJitterBufferMax 200 G711ATxPacketLength 20 G711AJitterBufferLength 10 G711AJitterBufferMax 200 G729TxPacketLength 20 G729JitterBufferLength 10 G729JitterBufferMax 200 LongHoldAlertPeriod 360 # options are ON and OFF DiffServMode OFF DefaultDiffServParam 192 RTPDiffServParam 160 # options are TRUNKMODE, CASCADEMODE, DISABLE VlanMode DISABLE VlanID 1 PcVlanID 2 TftpAddress 192.168.5.100 # save to phone and used next time if not offered from DHCP Q_Param 50 uniden00e01102f8ff.txt # UIP200 Mass Configuration System Mac-based File # Notes: Lines start with '#' are comments # To leave a field value unchanged (as saved on local phone), leave value to blank. # To disable a field, use '-' as value # MAXIMUM FILE SIZE IS 10KB # Current Limitation: No spaces allowed for a setting's value # Version: BS.459a # Firmware. The items listed in this Firmware section must be in this order. # FirmwareVersion and FirmwareFileName only used if AutoFirmwareUpdate is YES # FimrwareFileName only used if FirmwareVersion differ from firmware ver in Flash AutoFirmwareUpdate YES #choices are YES and NO FirmwareFileName uip200_459aenc.pac FirmwareVersion BS4.59a # Sip Settings MyLcdDisplay 1006 MyDialNumber 1006 DisplayName Sharon UserNameForProxy 1006 PasswordForProxy **** UserNameForRegistrar 1006 PasswordForRegistrar **** # Programmable Keys. Key functionality must go before key values. ProgrammableKey1 OneTouchDial ProgrammableKey2 OneTouchDial ProgrammableKey3 OneTouchDial ProgrammableKey4 OneTouchDial ProgrammableKey5 TwoTouchDial ProgrammableKey6 DoNotDisturb ProgrammableKey7 VMA ProgrammableKey8 Mute # One and Two-touch keys. Must go after Programmable keys functionality definitions. # Refer to Programmable and Fixed Function Keys for usage guide # OneTouchKeyX value is used ONLY when ProgrammableKeyX is OneTouchDial OneTouchKey1 88 OneTouchKey2 4111 OneTouchKey3 3456 OneTouchKey4 8500 OneTouchKey5 18178583152 OneTouchKey6 18178583152 OneTouchKey7 18178583152 OneTouchKey8 18178583152 TwoTouchDigit0 3459 TwoTouchDigit1 3450 TwoTouchDigit2 4420 TwoTouchDigit3 4421 TwoTouchDigit4 4422 TwoTouchDigit5 4423 TwoTouchDigit6 4424 TwoTouchDigit7 4425 TwoTouchDigit8 4426 TwoTouchDigit9 4427 # Hotline and vmwi numbers --Must be placed after OneTouchDial's HotLineNumber - VmaDirectCallNo 8500 #value associating with VMA Programmable key. VmwiLampIndicator Enable TimeDisplay Enable #end of file sip.conf [1006] type=friend secret=**** host=dynamic context=sip callerid= "Sharon" <1006> nat=never canreinvite=yes disallow=all allow=ulaw -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20041217/2eae4441/attachment.htm
Jeremy Gehris
2004-Dec-17 16:17 UTC
[Asterisk-Users] Call Queue Uniden UIP 200 not working
Its working now, I have no clue as to what I did, thanks anyways for being there :) _____ From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Jeremy Gehris Sent: Friday, December 17, 2004 6:09 PM To: Asterisk-Users@lists.digium.com Subject: [Asterisk-Users] Call Queue Uniden UIP 200 not working I just got my wife this phone, and when calls come in on the queue it will not ring, if I dial the ext it rings, here is the config from the tftp server: Thanks unidencom.txt # UIP200 Mass Configuration System Generic File # Notes: # 1. Lines start with '#' are comments # 2. To leave a field value unchanged (as saved on local phone), leave value to blank. # 3. To set a field's value to empty, use '-' as value. # 4. To NOT overwrite user local settings of: programmable key, one/two touch keys, VMA # number, VMWILampIndicator, set "OverwriteLocalSetting = NO". Default is "YES". This # key will ALSO affect whether or not THESE settings in uniden<MAC>.txt be used. # 5. Any duplicate parameters exist in both unidencom.txt and uniden<MAC>.txt, MAC settings # will be used. # MAXIMUM FILE SIZE IS 10KB # Current Limitation: No spaces allowed for a setting's value # Version: 4.59a #Overwrite user local settings of programmable keys, one/two touch keys, vma settings #If set to no, these current settings on the phone will not be overwritten. OverwriteLocalSettings YES # must be placed on top of config file # Sip Settings --If only ProxyServer needed, set OutboundProxy1/Port same as ProxyServer/Port ProxyServer 192.168.5.117 # can be an IP address or FDQN ProxyServerPort 5060 # 0 to use default port OutboundProxy1 192.168.5.117 # can be an IP address or FQDN OutboundProxy1Port 5060 # enter a port number or 0 for default (5060) OutboundProxy2 192.168.5.117 # can be an IP address or FQDN OutboundProxy2Port 5060 # enter a port number or 0 for default (5060) EmergencyProxy 192.168.5.117 EmergencyProxyPort 5060 Registrar1 192.168.5.117 # can be an IP address or FQDN Registrar1Port 5060 # enter a port number or 0 for default (5060) Registrar2 192.168.5.117 # can be an IP address or FQDN Registrar2Port 5060 # enter a port number or 0 for default (5060) #DnsServer_1 10.0.0.13 # may not be necessary if use DHCP #DnsServer_2 151.165.11.201 # may not be necessary if use DHCP RegisterExpireSec 3600 RegisterRetrySec 90RegisterExpireLimitPercent 10 FailoverRetrySec 8 SipPort 5060 SRVRecordName - #_sip._udp.unisip.com # options are ON or OFF SessionTimerSupport ON # options are ON or OFF SessionTimerRefresher ON SessionTimerMin 60 TimerInterval0 300 TimerInterval1 150 # Audio Settings G711MuTxPacketLength 20 G711MuJitterBufferLength 10 G711MuJitterBufferMax 200 G711ATxPacketLength 20 G711AJitterBufferLength 10 G711AJitterBufferMax 200 G729TxPacketLength 20 G729JitterBufferLength 10 G729JitterBufferMax 200 LongHoldAlertPeriod 360 # options are ON and OFF DiffServMode OFF DefaultDiffServParam 192 RTPDiffServParam 160 # options are TRUNKMODE, CASCADEMODE, DISABLE VlanMode DISABLE VlanID 1 PcVlanID 2 TftpAddress 192.168.5.100 # save to phone and used next time if not offered from DHCP Q_Param 50 uniden00e01102f8ff.txt # UIP200 Mass Configuration System Mac-based File # Notes: Lines start with '#' are comments # To leave a field value unchanged (as saved on local phone), leave value to blank. # To disable a field, use '-' as value # MAXIMUM FILE SIZE IS 10KB # Current Limitation: No spaces allowed for a setting's value # Version: BS.459a # Firmware. The items listed in this Firmware section must be in this order. # FirmwareVersion and FirmwareFileName only used if AutoFirmwareUpdate is YES # FimrwareFileName only used if FirmwareVersion differ from firmware ver in Flash AutoFirmwareUpdate YES #choices are YES and NO FirmwareFileName uip200_459aenc.pac FirmwareVersion BS4.59a # Sip Settings MyLcdDisplay 1006 MyDialNumber 1006 DisplayName Sharon UserNameForProxy 1006 PasswordForProxy **** UserNameForRegistrar 1006 PasswordForRegistrar **** # Programmable Keys. Key functionality must go before key values. ProgrammableKey1 OneTouchDial ProgrammableKey2 OneTouchDial ProgrammableKey3 OneTouchDial ProgrammableKey4 OneTouchDial ProgrammableKey5 TwoTouchDial ProgrammableKey6 DoNotDisturb ProgrammableKey7 VMA ProgrammableKey8 Mute # One and Two-touch keys. Must go after Programmable keys functionality definitions. # Refer to Programmable and Fixed Function Keys for usage guide # OneTouchKeyX value is used ONLY when ProgrammableKeyX is OneTouchDial OneTouchKey1 88 OneTouchKey2 4111 OneTouchKey3 3456 OneTouchKey4 8500 OneTouchKey5 18178583152 OneTouchKey6 18178583152 OneTouchKey7 18178583152 OneTouchKey8 18178583152 TwoTouchDigit0 3459 TwoTouchDigit1 3450 TwoTouchDigit2 4420 TwoTouchDigit3 4421 TwoTouchDigit4 4422 TwoTouchDigit5 4423 TwoTouchDigit6 4424 TwoTouchDigit7 4425 TwoTouchDigit8 4426 TwoTouchDigit9 4427 # Hotline and vmwi numbers --Must be placed after OneTouchDial's HotLineNumber - VmaDirectCallNo 8500 #value associating with VMA Programmable key. VmwiLampIndicator Enable TimeDisplay Enable #end of file sip.conf [1006] type=friend secret=**** host=dynamic context=sip callerid= "Sharon" <1006> nat=never canreinvite=yes disallow=all allow=ulaw -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20041217/f9514dc5/attachment.htm
Charles S. Antrim
2004-Dec-17 16:23 UTC
[Asterisk-Users] Call Queue Uniden UIP 200 not working
Jeremy, I am having similar problems, cannot get the phone to register. I see your config, is there anything special you have done to get the phone to register? I get the #3 REGISTER ERROR on the lcd? Thanks, Chuck -----Original Message----- From: "Jeremy Gehris" <asterisk@socsystems.net> To: <Asterisk-Users@lists.digium.com> Cc: Date: Fri, 17 Dec 2004 18:08:44 -0500 Subject: [Asterisk-Users] Call Queue Uniden UIP 200 not working I just got my wife this phone, and when calls come in on the queue it will not ring, if I dial the ext it rings, here is the config from the tftp server: Thanks unidencom.txt # UIP200 Mass Configuration System Generic File # Notes: # 1. Lines start with '#' are comments # 2. To leave a field value unchanged (as saved on local phone), leave value to blank. # 3. To set a field's value to empty, use '-' as value. # 4. To NOT overwrite user local settings of: programmable key, one/two touch keys, VMA # number, VMWILampIndicator, set "OverwriteLocalSetting = NO". Default is "YES". This # key will ALSO affect whether or not THESE settings in uniden<MAC>.txt be used. # 5. Any duplicate parameters exist in both unidencom.txt and uniden<MAC>.txt, MAC settings # will be used. # MAXIMUM FILE SIZE IS 10KB # Current Limitation: No spaces allowed for a setting's value # Version: 4.59a #Overwrite user local settings of programmable keys, one/two touch keys, vma settings #If set to no, these current settings on the phone will not be overwritten. OverwriteLocalSettings YES # must be placed on top of config file # Sip Settings --If only ProxyServer needed, set OutboundProxy1/Port same as ProxyServer/Port ProxyServer 192.168.5.117 # can be an IP address or FDQN ProxyServerPort 5060 # 0 to use default port OutboundProxy1 192.168.5.117 # can be an IP address or FQDN OutboundProxy1Port 5060 # enter a port number or 0 for default (5060) OutboundProxy2 192.168.5.117 # can be an IP address or FQDN OutboundProxy2Port 5060 # enter a port number or 0 for default (5060) EmergencyProxy 192.168.5.117 EmergencyProxyPort 5060 Registrar1 192.168.5.117 # can be an IP address or FQDN Registrar1Port 5060 # enter a port number or 0 for default (5060) Registrar2 192.168.5.117 # can be an IP address or FQDN Registrar2Port 5060 # enter a port number or 0 for default (5060) #DnsServer_1 10.0.0.13 # may not be necessary if use DHCP #DnsServer_2 151.165.11.201 # may not be necessary if use DHCP RegisterExpireSec 3600 RegisterRetrySec 90RegisterExpireLimitPercent 10 FailoverRetrySec 8 SipPort 5060 SRVRecordName - #_sip._udp.unisip.com # options are ON or OFF SessionTimerSupport ON # options are ON or OFF SessionTimerRefresher ON SessionTimerMin 60 TimerInterval0 300 TimerInterval1 150 # Audio Settings G711MuTxPacketLength 20 G711MuJitterBufferLength 10 G711MuJitterBufferMax 200 G711ATxPacketLength 20 G711AJitterBufferLength 10 G711AJitterBufferMax 200 G729TxPacketLength 20 G729JitterBufferLength 10 G729JitterBufferMax 200 LongHoldAlertPeriod 360 # options are ON and OFF DiffServMode OFF DefaultDiffServParam 192 RTPDiffServParam 160 # options are TRUNKMODE, CASCADEMODE, DISABLE VlanMode DISABLE VlanID 1 PcVlanID 2 TftpAddress 192.168.5.100 # save to phone and used next time if not offered from DHCP Q_Param 50 uniden00e01102f8ff.txt # UIP200 Mass Configuration System Mac-based File # Notes: Lines start with '#' are comments # To leave a field value unchanged (as saved on local phone), leave value to blank. # To disable a field, use '-' as value # MAXIMUM FILE SIZE IS 10KB # Current Limitation: No spaces allowed for a setting's value # Version: BS.459a # Firmware. The items listed in this Firmware section must be in this order. # FirmwareVersion and FirmwareFileName only used if AutoFirmwareUpdate is YES # FimrwareFileName only used if FirmwareVersion differ from firmware ver in Flash AutoFirmwareUpdate YES #choices are YES and NO FirmwareFileName uip200_459aenc.pac FirmwareVersion BS4.59a # Sip Settings MyLcdDisplay 1006 MyDialNumber 1006 DisplayName Sharon UserNameForProxy 1006 PasswordForProxy **** UserNameForRegistrar 1006 PasswordForRegistrar **** # Programmable Keys. Key functionality must go before key values. ProgrammableKey1 OneTouchDial ProgrammableKey2 OneTouchDial ProgrammableKey3 OneTouchDial ProgrammableKey4 OneTouchDial ProgrammableKey5 TwoTouchDial ProgrammableKey6 DoNotDisturb ProgrammableKey7 VMA ProgrammableKey8 Mute # One and Two-touch keys. Must go after Programmable keys functionality definitions. # Refer to Programmable and Fixed Function Keys for usage guide # OneTouchKeyX value is used ONLY when ProgrammableKeyX is OneTouchDial OneTouchKey1 88 OneTouchKey2 4111 OneTouchKey3 3456 OneTouchKey4 8500 OneTouchKey5 18178583152 OneTouchKey6 18178583152 OneTouchKey7 18178583152 OneTouchKey8 18178583152 TwoTouchDigit0 3459 TwoTouchDigit1 3450 TwoTouchDigit2 4420 TwoTouchDigit3 4421 TwoTouchDigit4 4422 TwoTouchDigit5 4423 TwoTouchDigit6 4424 TwoTouchDigit7 4425 TwoTouchDigit8 4426 TwoTouchDigit9 4427 # Hotline and vmwi numbers --Must be placed after OneTouchDial's HotLineNumber - VmaDirectCallNo 8500 #value associating with VMA Programmable key. VmwiLampIndicator Enable TimeDisplay Enable #end of file sip.conf [1006] type=friend secret=**** host=dynamic context=sip callerid= "Sharon" <1006> nat=never canreinvite=yes disallow=all allow=ulaw -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20041217/99b52bf3/attachment.htm