Isn't it supposed to be:
Channel => 1
Just been through this exact same problem myself. If it is really the same,
you should be able to get Asterisk working again by commenting out the
"channel => xxx" lines from Zapata.conf. OK, zap channels will not
work but
you will know it maybe the same problem.
If it is, make you are loading zaptel and wcfxo by using lsmod.
My problem turned out to be that I was editing a copy of zaptel.conf in
/etc/asterisk rather than the correct one in /etc
If zaptel and wxfxo is loaded, you should check that ztcfg is loading the
channels correctly by running
ztcfg -tvvv
My guess is that you will see that there are no channels created by the
config utility.
-----Original Message-----
From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Ronald
Hartmann
Sent: November 04, 2004 8:18 PM
To: asterisk-users@lists.digium.com
Subject: [Asterisk-Users] FW: ZapTel problems
Good Day,
Well I had the box up and running accepting an incoming pstn line.
Then made a change to the zap conf file and now asterisk will not start
001?Had the box up and running
002?went to change the zapata.conf to include my pstn lines
003?and then rebooted and asterisk will not load.
004?
005?Not sure if it is a co-incidence or not
006?
007?
008?my "zapata.conf" file
009?
010?[channels]
011?language=en
012?
013?context=from-pstn
014?signalling=fxs_ks
015?faxdetect=incoming
016?usecallerid=yes
017?echocancel=yes
018?echocancelwhenbridged=no
019?echotraining=800
020?group=0
021?channel=1
022?channel=2
023?
024?context=default
025?signalling=fxo_ks
026?channel=3
027?channel=4
028?
029?
030?
031?Zaptel Configuration
032?=====================033?
034?
035?4 channels configured.
036?
037?
038?Nov 5 13:50:14 pc-11 kernel: Zapata Telephony Interface Registered
on major 196
039?Nov 5 13:50:17 pc-11 kernel: Freshmaker version: 71
040?Nov 5 13:50:17 pc-11 kernel: Freshmaker passed register test
041?Nov 5 13:50:17 pc-11 kernel: Module 0: Installed -- AUTO FXS/DPO
042?Nov 5 13:50:17 pc-11 kernel: Module 1: Installed -- AUTO FXS/DPO
043?Nov 5 13:50:17 pc-11 kernel: Module 2: Installed -- AUTO FXO (FCC
mode)
044?Nov 5 13:50:17 pc-11 kernel: Module 3: Installed -- AUTO FXO (FCC
mode)
045?Nov 5 13:50:17 pc-11 kernel: Found a Wildcard TDM: Wildcard TDM400P
REV H (4 modules)
046?
047?
048?when i start asterisk -vvvvvc
049? [chan_phone.so] => (Linux Telephony API Support)
050? == Parsing '/etc/asterisk/phone.conf': Found
051? == Registered channel type 'Phone' (Standard Linux Telephony API
Driver)
052? [chan_zap.so] => (Zapata Telephony w/PRI)
053? == Parsing '/etc/asterisk/zapata.conf': Found
054? == Unregistered channel type 'Tor'
055? == Unregistered channel type 'Zap'
056?[root@pc-11 asterisk]# Ouch ... error while writing audio data: :
Broken pipe
057?
058?
059?Not sure where to go is this a zap issue or is it a co-incidence?
060?
Any idea what I should have in my config file for a single digium 4 port
card with 2 fxo and 2 fxs
thanks
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users