asterisk users - Dec 2003 - Unable to Receive Fax -- RxFAX Application

Hi,

  Below if the error message which I got from asterisk.
  I was trying to fax to asterisk from my fax machine. I really dunno what
is the problem. I use alaw & ulaw codec only through my ATA 186. Can anyone
help me what could be the problem.


    -- Executing Goto("SIP/-080ef9a0", "13732|s|1") in new
stack
    -- Goto (13732,s,1)
    -- Executing Wait("SIP/-080ef9a0", "2") in new stack
    -- Executing Answer("SIP/-080ef9a0", "") in new stack
    -- Executing RxFAX("SIP/-080ef9a0", "/root/kans.tif") in
new stack
Changed from phase 0 to 1
NOTICE[278543]: File rtp.c, Line 264 (process_rfc3389): RFC3389 support
incomplete.  Turn off on client if possible
NOTICE[278543]: File rtp.c, Line 264 (process_rfc3389): RFC3389 support
incomplete.  Turn off on client if possible
Start receiving document
Changed from phase 1 to 4
Sending ident
>>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
DIS:
Store and forward Internet fax: no
Real-time Internet fax: no
Preferred octets: 256
Can receive fax
Data signalling rate: V.29
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
R8x15.4lines/mm OK
Inch-based resolution preferred: no
Metric-based resolution preferred: no
Minimum scan line time for higher resolutions: T15.4 =
T7.7
>>> DIS: 80 00 c6 f0 80 80 01
NOTICE[278543]: File rtp.c, Line 418 (ast_rtp_read): Unknown RTP codec 100
received

Thanks in advance,
Kannaiyan

On Tue, 2003-12-16 at 23:57, Kannaiyan Natesan wrote:
> Hi,
> 
>   Below if the error message which I got from asterisk.
>   I was trying to fax to asterisk from my fax machine. I really dunno what
> is the problem. I use alaw & ulaw codec only through my ATA 186. Can
anyone
> help me what could be the problem.
> 
> 
>     -- Executing Goto("SIP/-080ef9a0", "13732|s|1") in
new stack
>     -- Goto (13732,s,1)
>     -- Executing Wait("SIP/-080ef9a0", "2") in new
stack
>     -- Executing Answer("SIP/-080ef9a0", "") in new
stack
>     -- Executing RxFAX("SIP/-080ef9a0",
"/root/kans.tif") in new stack
> NOTICE[278543]: File rtp.c, Line 418 (ast_rtp_read): Unknown RTP codec 100
> received
This error message is SIP related not fax related. Also haven't you seen
the recent heated discussion about don't do fax over VoIP. Also, I think
Steve Underwood said it should only work with Zap channels.
-- 
Steven Critchfield <critch@basesys.com>

You seem to have VAD enabled on the ATA. Switch it off

On Wednesday 17 December 2003 6:57 am, Kannaiyan Natesan
wrote:
> Hi,
>
>   Below if the error message which I got from asterisk.
>   I was trying to fax to asterisk from my fax machine. I really dunno what
> is the problem. I use alaw & ulaw codec only through my ATA 186. Can
anyone
> help me what could be the problem.
>
>
>     -- Executing Goto("SIP/-080ef9a0", "13732|s|1") in
new stack
>     -- Goto (13732,s,1)
>     -- Executing Wait("SIP/-080ef9a0", "2") in new
stack
>     -- Executing Answer("SIP/-080ef9a0", "") in new
stack
>     -- Executing RxFAX("SIP/-080ef9a0",
"/root/kans.tif") in new stack
> Changed from phase 0 to 1
> NOTICE[278543]: File rtp.c, Line 264 (process_rfc3389): RFC3389 support
> incomplete.  Turn off on client if possible
> NOTICE[278543]: File rtp.c, Line 264 (process_rfc3389): RFC3389 support
> incomplete.  Turn off on client if possible
> Start receiving document
> Changed from phase 1 to 4
> Sending ident
>
> >>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20
20 20
>
> DIS:
> Store and forward Internet fax: no
> Real-time Internet fax: no
> Preferred octets: 256
> Can receive fax
> Data signalling rate: V.29
> R8x7.7lines/mm and/or 200x200pels/25.4mm OK
> 2D coding OK
> Scan line length: 215mm
> Recording length: A4 (297mm)
> Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
> R8x15.4lines/mm OK
> Inch-based resolution preferred: no
> Metric-based resolution preferred: no
> Minimum scan line time for higher resolutions: T15.4 = T7.7
>
> >>> DIS: 80 00 c6 f0 80 80 01
>
> NOTICE[278543]: File rtp.c, Line 418 (ast_rtp_read): Unknown RTP codec 100
> received
>
> Thanks in advance,
> Kannaiyan
>
>
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
-- 
Michael Bielicki
Managing Director
TAAN Consultants Ltd
http://www.global-gateway.net/

--------------------------------------------------------------------------

This correspondence is for the named person's use only. It may contain
confidential or legally privileged information or both. No confidentiality
or privilege is waived or lost by any mistransmission. If you receive this
correspondence in error, please immediately delete it from your system and
notify the sender. You must not disclose, copy or rely on any part of this
correspondence if you are not the intended recipient.

Any opinions expressed in this message are those of the individual sender.