I have a SwissVoice IP10S but can not seem to get it to have dialtone or dial on *. Calls to or from 3001 don't work. Any ideas are appreciated. Robert mgcp.conf is: [general] port = 2427 bindaddr = 192.168.0.110 [ip10] host = 192.168.0.5 context = from-sip line => aaln/1 The portion of extensions.conf is: exten => 3001,1,Dial(MGCP/aaln1,20) exten => 3001,103,Hangup
Citeren rnc Info Lists <info-lists@robertc.de>:> I have a SwissVoice IP10S but can not seem to get it to have dialtone or > dial on *. Calls to or from 3001 don't work.Were you able to configure the phones through their webinterface ? You could try entering 'mgcp debug' and then power up your phone to see if it registers at all... -- Met vriendelijke groet, Florian Overkamp
rnc Info Lists wrote:>I have a SwissVoice IP10S but can not seem to get it to have dialtone or >dial on *. Calls to or from 3001 don't work. > >Any ideas are appreciated. >Robert > >mgcp.conf is: >[general] >port = 2427 >bindaddr = 192.168.0.110 > >[ip10] >host = 192.168.0.5 >context = from-sip >line => aaln/1 > >The portion of extensions.conf is: >exten => 3001,1,Dial(MGCP/aaln1,20) > >exten => 3001,1,Dial(MGCP/aaln/1@ip10,20)>exten => 3001,103,Hangup > >_______________________________________________ >Asterisk-Users mailing list >Asterisk-Users@lists.digium.com >http://lists.digium.com/mailman/listinfo/asterisk-users > > >-- ---- --------- Best Regards, Pavel Litvinenko. ICQ: 16224754 Ph: (8632) 923962, 923640 sip:litw@iptel.org
Hello, I have experienced the 2 digits problem earlier. Here is my "old" configuration: Phone name Undefined Appli version IP10 M v0.2.0 (Build1) Boot version IP10 Boot v0.2.0 DSP version Rel 9.1.0.4, Build p8 GG version R9.0.0 IPP (Build 5) IP address 192. 168. 10. 11 Mac address 00:05:90:02:02:38 Protocol MGCP 1.0 With the new software version this pb disappeared: Phone name Undefined Appli version IP10 M v0.3.0 (Build5) Boot version IP10 Boot v0.3.3 DSP version Rel 9.1.0.4, Build p8 GG version R9.0.0 IPP (Build 5) IP address 192. 168. 10. 10 Mac address 00:05:90:02:02:f0 Protocol MGCP 1.0 Regards, Daniel Florian Overkamp a ?crit:>Hi, > > > >>-----Original Message----- >>FLorian, >>What version of the IP10 firmware are you using?? I have >>experienced the >>multiple digit problem. Seems that this happens when dialing >>more than 2 >>digits. My 2 digit extensions seem to work fine but the ones >>greater than >>2 digits get this repeating issue. >> >> > >I now have: > >Phone name Undefined >Appli version IP10 M v0.3.0 (Build5) >Boot version IP10 Boot v0.3.3 >DSP version Rel 9.1.0.4, Build p8 >GG version R9.0.0 IPP (Build 5) >IP address 217. 114. 96. 205 >Mac address 00:05:90:02:03:0d >Protocol MGCP 1.0 > >Best regards >Florian > >_______________________________________________ >Asterisk-Users mailing list >Asterisk-Users@lists.digium.com >http://lists.digium.com/mailman/listinfo/asterisk-users > > > > >-- Daniel ANDRE (mailto:dandre@iris-tech.fr) IRIS Technologies - http://www.iris-tech.com Serveur kwartz - http://www.kwartz.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20031104/2d8e9a46/attachment.htm
With some lively IP10S discussions here maybe someone knows about this issue: I can use the speaker phone ok. However the handset and switch hook do not seem to work. If I enable "headset" then I can get audio via the handset but still have to use the speaker phone button to take ot "off hook". Seems a bit wierd.. I have sent it to Swissvoice but no answer back yet. Robert