Hi folks,
I've updated my dovecot 0.99.14 with the last package
(0.99.14-1sarge0), but it doesn't work. I've found that problem:
http://comments.gmane.org/gmane.linux.debian.devel.bugs.general/80872
then I've removed that, and reinstalled first package (from
/var/cache/apt/archives), and NOW it doesnt' work too :(
When I start the daemon, I see in my logs:
dovecot: May 31 12:40:28 Info: Dovecot starting up
dovecot-auth: May 31 12:40:29 Fatal: Unknown userdb type 'vpopmail'
dovecot: May 31 12:40:29 Error: Auth process died too early - shutting down
dovecot: May 31 12:40:29 Error: child 15798 (auth) returned error 89
imap-login: May 31 12:40:29 Fatal: fd_send(-1) failed: No such file or directory
imap-login: May 31 12:40:29 Fatal: fd_send(-1) failed: No such file or directory
I don't understand. Any advice will be appreciated
Best Regards
Andrea
my dovecot.conf is like that:
## Dovecot 1.0 configuration file
<...>
# Protocols we want to be serving:
# imap imaps pop3 pop3s
protocols = imaps
<...>
# IP or host address where to listen in for SSL connections. Defaults
# to above non-SSL equilevants if not specified.
imaps_listen = 192.168.17.10:993
#pop3s_listen
# Disable SSL/TLS support.
ssl_disable = no
# PEM encoded X.509 SSL/TLS certificate and private key. They're opened
before
# dropping root privileges, so keep the key file unreadable by anyone but
# root.
#ssl_cert_file = /etc/ssl/certs/dovecot.pem
#ssl_key_file = /etc/ssl/private/dovecot.pem
ssl_cert_file = /var/qmail/control/servercert.pem
ssl_key_file = /var/qmail/control/servercert.pem
<...>
# Use this logfile instead of syslog(). /dev/stderr can be used if you want to
# use stderr for logging (ONLY /dev/stderr - otherwise it is closed).
log_path = /var/log/dovecot.log
# For informational messages, use this logfile instead of the default
info_log_path = /var/log/dovecot.log
<...>
##
## IMAP login process
##
login = imap
# Executable location.
#login_executable = /usr/lib/dovecot/imap-login
# User to use for the login process. Create a completely new user for this,
# and don't use it anywhere else. The user must also belong to a group where
# only it has access, it's used to control access for authentication
process.
# Note that this user is NOT used to access mails.
# http://wiki.dovecot.org/UserIds
login_user = dovecot
<...>
##
## Mail processes
##
# Maximum number of running mail processes. When this limit is reached,
# new users aren't allowed to log in.
#max_mail_processes = 1024
# Show more verbose process titles (in ps). Currently shows user name and
# IP address. Useful for seeing who are actually using the IMAP processes
# (eg. shared mailboxes or if same uid is used for multiple accounts).
verbose_proctitle = no
# Show protocol level SSL errors.
#verbose_ssl = no
# Valid UID range for users, defaults to 500 and above. This is mostly
# to make sure that users can't log in as daemons or other system users.
# Note that denying root logins is hardcoded to dovecot binary and can't
# be done even if first_valid_uid is set to 0.
first_valid_uid = 89
last_valid_uid = 89
# Valid GID range for users, defaults to non-root/wheel. Users having
# non-valid GID as primary group ID aren't allowed to log in. If user
# belongs to supplementary groups with non-valid GIDs, those groups are
# not set.
first_valid_gid = 0
#last_valid_gid = 0
<...>
# Default MAIL environment to use when it's not set. By leaving this empty
# dovecot tries to do some automatic detection as described in
# /usr/share/doc/dovecot-common/mail-storages.txt. There's a few special
# variables you can use:
#
# %u - username
# %n - user part in user at domain, same as %u if there's no domain
# %d - domain part in user at domain, empty if user there's no domain
# %h - home directory
#
# You can also limit a width of string by giving the number of max. characters
# after the '%' character. For example %1u gives the first character of
# username. Some examples:
#
# default_mail_env = maildir:/var/mail/%1u/%u/Maildir
# default_mail_env = mbox:~/mail/:INBOX=/var/mail/%u
# default_mail_env = mbox:/var/mail/%d/%n/:INDEX=/var/indexes/%d/%n
#
default_mail_env = maildir:~/Maildir
<...>
# Workarounds for various client bugs:
# oe6-fetch-no-newmail:
# Never send EXISTS/RECENT when replying to FETCH command. Outlook Express
# seems to think they are FETCH replies and gives user "Message no
longer
# in server" error. Note that OE6 still breaks even with this
workaround
# if synchronization is set to "Headers Only".
# outlook-idle:
# Outlook and Outlook Express never abort IDLE command, so if no mail
# arrives in half a hour, Dovecot closes the connection. This is still
# fine, except Outlook doesn't connect back so you don't see if new
mail
# arrives.
# outlook-pop3-no-nuls:
# Outlook and Outlook Express hang if mails contain NUL characters.
# This setting replaces them with 0x80 character.
client_workarounds = oe6-fetch-no-newmail outlook-idle outlook-pop3-no-nuls
<...>
# Copy mail to another folders using hard links. This is much faster than
# actually copying the file. This is problematic only if something modifies
# the mail in one folder but doesn't want it modified in the others. I
don't
# know any MUA which would modify mail files directly. IMAP protocol also
# requires that the mails don't change, so it would be problematic in any
case.
# If you care about performance, enable it.
maildir_copy_with_hardlinks = yes
<...>
##
## Authentication processes
##
# An Authentication process is a child process used by Dovecot that
# handles the authentication steps. The steps cover an authentication
# mechanism (auth_mechanisms, how the client authenticates in the IMAP or
# POP3 protocol), which password database should be queried (auth_passdb),
# and which user database should be queried (auth_userdb, to obtain
# UID, GID, and location of the user's mailbox/home directory).
#
# You can have multiple processes, though a typical configuration will
# have only one. Each time "auth = xx" is seen, a new process
# definition is started. The point of multiple processes is to be able
# to set stricter permissions. (See auth_user below.)
#
# Just remember that only one Authentication process is asked for the
# password, so you can't have different passwords accessible through
# different process definitions (unless they have different
# auth_mechanisms, and you're ok with having different password for
# each mechanisms).
# Authentication process name.
auth = default
# Specifies how the client authenticates in the IMAP protocol.
# Space separated list of permitted authentication mechanisms:
# anonymous plain digest-md5 cram-md5
#
# anonymous - No authentication required.
# plain - The password is sent as plain text. All IMAP/POP3 clients
# support this, and the password can be encrypted by Dovecot to match
# any of the encryption schemes used in password databases.
# digest-md5 and cram-md5 - both encrypt the password so it is more
# secure in transit, but are not well supported by clients, and
# require that the password database use a matching encryption
# scheme (or be in plaintext).
#
# See auth.txt for more details.
#
# If you are using SSL there is less benefit to digest-md5 and
# cram-md5 as the communication is already encrypted.
auth_mechanisms = plain
# Space separated list of realms for SASL authentication mechanisms that need
# them. You can leave it empty if you don't want to support multiple realms.
# Many clients simply use the first one listed here, so keep the default realm
# first.
#auth_realms
# Default realm/domain to use if none was specified. This is used for both
# SASL realms and appending @domain to username in plaintext logins.
#auth_default_realm
# User database specifies where mails are located and what user/group IDs
# own them. For single-UID configuration use "static".
# http://wiki.dovecot.org/Authentication
# http://wiki.dovecot.org/VirtualUsers
# passwd: /etc/passwd or similiar, using getpwnam()
# passwd-file <path>: passwd-like file with specified location
# static uid=<uid> gid=<gid> home=<dir template>: static
settings
# vpopmail: vpopmail library
# ldap <config path>: LDAP, see /etc/dovecot/dovecot-ldap.conf
# mysql <config path>: a MySQL database, see
/etc/dovecot/dovecot-mysql.conf
# pgsql <config path>: a PostgreSQL database, see
# /etc/dovecot/dovecot-pgsql.conf
auth_userdb = vpopmail
# Password database specifies only the passwords for users.
# http://wiki.dovecot.org/Authentication
# passwd: /etc/passwd or similiar, using getpwnam()
# shadow: /etc/shadow or similiar, using getspnam()
# pam [<service> | *]: PAM authentication
# passwd-file <path>: passwd-like file with specified location
# vpopmail: vpopmail authentication
# ldap <config path>: LDAP, see /etc/dovecot/dovecot-ldap.conf
# mysql <config path>: a MySQL database, see
/etc/dovecot/dovecot-mysql.conf
# pgsql <config path>: a PostgreSQL database, see
# /etc/dovecot/dovecot-pgsql.conf
auth_passdb = vpopmail
#auth_executable = /usr/lib/dovecot/dovecot-auth
# Set max. process size in megabytes.
#auth_process_size = 256
# User to use for the process. This user needs access to only user and
# password databases, nothing else. Only shadow and pam authentication
# requires roots, so use something else if possible. Note that passwd
# authentication with BSDs internally accesses shadow files, which also
# requires roots. Note that this user is NOT used to access mails.
# That user is specified by auth_userdb above.
auth_user = root
<...>