All, I''m currently running a stock Windows 2003 x64 R2 SP2 install under Xen 3.3 using a NetBSD 5.0-STABLE dom0. After installing the 10.0.69 GPLPV drivers (gplpv_fre_wnet_x86_0.10.0.69.msi), I can only get Windows to boot by using the /NOGPLPV switch. If I attempt to boot w/o the switch, it will immediately BSOD. All of the Xen devices/services seem to be installed, so I''m not sure what''s wrong. Is this a known problem when using a NetBSD dom0? The NetBSD disks are mirrored using RAIDframe RAID-1, but I don''t believe that matters. Do I need to go through the serial port setup to help debug the problem, or will a crash dump work? Thanks! -Dustin _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
On Wed, May 20, 2009 at 12:49 PM, Dustin Marquess <dmarquess@gmail.com> wrote:> All, > > I''m currently running a stock Windows 2003 x64 R2 SP2 install under > Xen 3.3 using a NetBSD 5.0-STABLE dom0. > > After installing the 10.0.69 GPLPV drivers > (gplpv_fre_wnet_x86_0.10.0.69.msi), I can only get Windows to boot by > using the /NOGPLPV switch.Hope you have a backup :) If not, I believe there''s an uninstaller on http://meadowcourt.org/downloads/gplpv_uninstall_bat.zip> If I attempt to boot w/o the switch, it > will immediately BSOD. All of the Xen devices/services seem to be > installed, so I''m not sure what''s wrong. Is this a known problem when > using a NetBSD dom0? The NetBSD disks are mirrored using RAIDframe > RAID-1, but I don''t believe that matters.On Opensolaris dom0, you have to disable LSO and SG on Windows'' XenNet driver advanced properties. It also requires older version of GPLPV (0.9.12-pre13). Perhaps NetBSD requires the same thing. -- Fajar _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
On Wed, May 20, 2009 at 12:49 PM, Dustin Marquess <dmarquess@gmail.com> wrote:> I''m currently running a stock Windows 2003 x64 R2 SP2 install under > Xen 3.3 using a NetBSD 5.0-STABLE dom0. > > After installing the 10.0.69 GPLPV drivers > (gplpv_fre_wnet_x86_0.10.0.69.msi)Shouldn''t that be gplpv_fre_wnet_AMD64_0.10.0.69.msi? _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
On Wed, May 20, 2009 at 1:02 AM, Fajar A. Nugraha <fajar@fajar.net> wrote:> On Wed, May 20, 2009 at 12:49 PM, Dustin Marquess <dmarquess@gmail.com> wrote: >> I''m currently running a stock Windows 2003 x64 R2 SP2 install under >> Xen 3.3 using a NetBSD 5.0-STABLE dom0. >> >> After installing the 10.0.69 GPLPV drivers >> (gplpv_fre_wnet_x86_0.10.0.69.msi) > > Shouldn''t that be gplpv_fre_wnet_AMD64_0.10.0.69.msi?Sorry, that was a typo in the email. It indeed was the AMD64 version that I installed. -Dustin _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users