Hi there,
I have a Dell T3400 Workstation with CentOS5.1 as dom0. I have hidden
a network interface in dom0 to pass it to domU. The domU can come up with
the NIC when it''s OS is CentOS5.1 or RHEL5. But when it comes to
RedHat4.5
, the NIC can not be found.
As I type the command "lspci" in RHEL4.5 domU, it returned:
pcilib: Cannot open /proc/bus/pci
lspci: Cannot find any working access method.
And I found the three lines in "dmesg" output:
XENBUS: Device with no drvier: device/vbd/51713
XENBUS: Device with no driver: device/pci/0
XENBUS: Device with no driver: device/vif/0
After that, I tried to rebuild redhat4.5''s kernel, and set:
CONFIG_PCI=y
CONFIG_XEN_PCIDEV_FRONTEND=y
in the config file "kernel-2.6.9-i686-xenU.config".
But the new kernel make no difference in the above scenario. I found,
in the file "kernel-2.6.9-i686-xenU.config" that "CONFIG_PCI is
not set"
appears twice, one of which can not be changed, otherwise, kernel build
will fail.
Does anyone has similar experience on this issue? Thanks a lot!
--Jerry
_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users
>From the dmesg output it looks like your PV drivers are not loaded.Check this link for installing and configuring PV drivers http://www.redhat.com/docs/manuals/enterprise/RHEL-5-manual/en-US/RHEL510/html/Para-Virtualized_Drivers/chap-Para-Virtualized_Drivers-Installation_and_Configuration_of_Para_Virtualised_Drivers_on_Red_Hat_Enterprise_Linux_3.html ===============================Venkata Kumar Duvvuru, LSI Engenio, Adv. Development, Bangalore. Mob: +91-9880318542 Off : +91-80-41978700 ( Extn : 3544 ) ===============================-----Original Message----- From: xen-users-bounces@lists.xensource.com [mailto:xen-users-bounces@lists.xensource.com] On Behalf Of Bao Chunjie Sent: Friday, June 20, 2008 11:28 AM To: xen-users@lists.xensource.com Subject: [Xen-users] pci passthrough on RHEL 4.5 Hi there, I have a Dell T3400 Workstation with CentOS5.1 as dom0. I have hidden a network interface in dom0 to pass it to domU. The domU can come up with the NIC when it''s OS is CentOS5.1 or RHEL5. But when it comes to RedHat4.5 , the NIC can not be found. As I type the command "lspci" in RHEL4.5 domU, it returned: pcilib: Cannot open /proc/bus/pci lspci: Cannot find any working access method. And I found the three lines in "dmesg" output: XENBUS: Device with no drvier: device/vbd/51713 XENBUS: Device with no driver: device/pci/0 XENBUS: Device with no driver: device/vif/0 After that, I tried to rebuild redhat4.5''s kernel, and set: CONFIG_PCI=y CONFIG_XEN_PCIDEV_FRONTEND=y in the config file "kernel-2.6.9-i686-xenU.config". But the new kernel make no difference in the above scenario. I found, in the file "kernel-2.6.9-i686-xenU.config" that "CONFIG_PCI is not set" appears twice, one of which can not be changed, otherwise, kernel build will fail. Does anyone has similar experience on this issue? Thanks a lot! --Jerry _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
That document is for full-virtualized guests, while, my domU is paravitualized domU. That rpms don''t work for it. But thak you all the same for your help. --Jerry ----- Original Message ----- From: "Kumar, Venkat" <Venkat.Kumar@lsi.com> To: "Bao Chunjie" <bcj_sec@hotmail.com>; <xen-users@lists.xensource.com> Sent: Friday, June 20, 2008 4:23 PM Subject: RE: [Xen-users] pci passthrough on RHEL 4.5>From the dmesg output it looks like your PV drivers are not loaded.Check this link for installing and configuring PV drivers http://www.redhat.com/docs/manuals/enterprise/RHEL-5-manual/en-US/RHEL510/html/Para-Virtualized_Drivers/chap-Para-Virtualized_Drivers-Installation_and_Configuration_of_Para_Virtualised_Drivers_on_Red_Hat_Enterprise_Linux_3.html ===============================Venkata Kumar Duvvuru, LSI Engenio, Adv. Development, Bangalore. Mob: +91-9880318542 Off : +91-80-41978700 ( Extn : 3544 ) ===============================-----Original Message----- From: xen-users-bounces@lists.xensource.com [mailto:xen-users-bounces@lists.xensource.com] On Behalf Of Bao Chunjie Sent: Friday, June 20, 2008 11:28 AM To: xen-users@lists.xensource.com Subject: [Xen-users] pci passthrough on RHEL 4.5 Hi there, I have a Dell T3400 Workstation with CentOS5.1 as dom0. I have hidden a network interface in dom0 to pass it to domU. The domU can come up with the NIC when it''s OS is CentOS5.1 or RHEL5. But when it comes to RedHat4.5 , the NIC can not be found. As I type the command "lspci" in RHEL4.5 domU, it returned: pcilib: Cannot open /proc/bus/pci lspci: Cannot find any working access method. And I found the three lines in "dmesg" output: XENBUS: Device with no drvier: device/vbd/51713 XENBUS: Device with no driver: device/pci/0 XENBUS: Device with no driver: device/vif/0 After that, I tried to rebuild redhat4.5''s kernel, and set: CONFIG_PCI=y CONFIG_XEN_PCIDEV_FRONTEND=y in the config file "kernel-2.6.9-i686-xenU.config". But the new kernel make no difference in the above scenario. I found, in the file "kernel-2.6.9-i686-xenU.config" that "CONFIG_PCI is not set" appears twice, one of which can not be changed, otherwise, kernel build will fail. Does anyone has similar experience on this issue? Thanks a lot! --Jerry _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Seemingly Similar Threads
- Xen-3.2.1 Build Error
- RE: Xen-3.2.1 VT-d Support (NOT SURE WHETHER IT''S A BUG OR...)
- Grant Table Hyper Calls For Sharing Memory
- Xen-3.2.1 VT-d Support (NOT SURE WHETHER IT''S A BUG OR ...)
- RHEL 5.2 i386 image - Xen kernel doesn''t recognize the total amount of system memory