Hi, I successfully configure costum build XEN, with patches using LIDS [HIDS] ..[before!]. I recently upgrade memory and mainboard, from VIA chipset to Nvidia chipset board. I facing completely useless network card only in XEN kernel. My network configuration: eth0: DSL eth1: SWITCH eth2: XEN eth3: OFFLINE Nforce [eth0] RealTek RTL8139 [eth1,eth2 and eth3] Eth1 dumping lots of errors: NETDEV WATCHDOG: eth1: transmit timed out eth1: Transmit timeout, status 0c 0005 c07f media 00. eth1: Tx queue start entry 4 dirty entry 0. eth1: Tx descriptor 0 is 0008a06e. (queue head) eth1: Tx descriptor 1 is 0008a06e. eth1: Tx descriptor 2 is 0008a06e. eth1: Tx descriptor 3 is 0008a06e. eth1: link up, 100Mbps, full-duplex, lpa 0x45E1 I using routing mode for XEN, instead bridge as you see my network configuration. With or without the LIDS patches it is still the same. I using XEN 2.6 [no patches for XEN 2.7]. thanks, jsuthan [Zues HomeNetwork] _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users