The following patches apply over linus's tree and this patchset https://lore.kernel.org/all/20211007214448.6282-1-michael.christie at oracle.com/ which allows us to check the vhost owner thread's RLIMITs: It looks like that patchset has been ok'd by all the major parties and just needs a small cleanup to apply to Jens and Paul trees, so I wanted to post my threading patches based over it for review. The following patches allow us to support multiple vhost workers per device. I ended up just doing Stefan's original idea where userspace has the kernel create a worker and we pass back the pid. This has the benefit over the workqueue and userspace thread approach where we only have one'ish code path in the kernel during setup to detect old tools. The main IO paths and device/vq setup/teardown paths all use common code. I've also included a patch for qemu so you can get an idea of how it works. If we are ok with the kernel code then I'll break that up into a patchset and send to qemu-devel for review. Results: -------- fio jobs 1 2 4 8 12 16 ---------------------------------------------------------- 1 worker 84k 492k 510k - - - worker per vq 184k 380k 744k 1422k 2256k 2434k Notes: 0. This used a simple fio command: fio --filename=/dev/sdb --direct=1 --rw=randrw --bs=4k \ --ioengine=libaio --iodepth=128 --numjobs=$JOBS_ABOVE and I used a VM with 16 vCPUs and 16 virtqueues. 1. The patches were tested with emulate_pr=0 and these patches: https://lore.kernel.org/all/yq1tuhge4bg.fsf at ca-mkp.ca.oracle.com/t/ which are in mkp's scsi branches for the next kernel. They fix the perf issues where IOPs dropped at 12 vqs/jobs. 2. Because we have a hard limit of 1024 cmds, if the num jobs * iodepth was greater than 1024, I would decrease iodepth. So 12 jobs used 85 cmds, and 16 used 64. 3. The perf issue above at 2 jobs is because when we only have 1 worker we execute more cmds per vhost_work due to all vqs funneling to one worker. This results in less context switches and better batching without having to tweak any settings. I'm working on patches to add back batching during lio completion and do polling on the submission side. We will still want the threading patches, because if we batch at the fio level plus use the vhost theading patches, we can see a big boost like below. So hopefully doing it at the kernel will allow apps to just work without having to be smart like fio. fio using io_uring and batching with the iodepth_batch* settings: fio jobs 1 2 4 8 12 16 ------------------------------------------------------------- 1 worker 494k 520k - - - - worker per vq 496k 878k 1542k 2436k 2304k 2590k V3: - fully convert vhost code to use vq based APIs instead of leaving it half per dev and half per vq. - rebase against kernel worker API. - Drop delayed worker creation. We always create the default worker at VHOST_SET_OWNER time. Userspace can create and bind workers after that. v2: - change loop that we take a refcount to the worker in - replaced pid == -1 with define. - fixed tabbing/spacing coding style issue - use hash instead of list to lookup workers. - I dropped the patch that added an ioctl cmd to get a vq's worker's pid. I saw we might do a generic netlink interface instead.
Mike Christie
2021-Oct-22 05:19 UTC
[PATCH] QEMU vhost-scsi: add support for VHOST_SET_VRING_WORKER
This patch adds support for the proposed ioctl that allows userspace to create virtqueue workers. For vhost-scsi you can set virtqueue_workers to: 0: default behavior where we have 1 worker for all vqs. -1: create a worker per vq.>0: create N workers and allow the vqs to share them.TODO: - Better support for sharing workers where we bind based on ISR to vq mapping. Signed-off-by: Mike Christie <michael.christie at oracle.com> --- hw/scsi/vhost-scsi.c | 65 ++++++++++++++++++++ hw/virtio/vhost-backend.c | 8 +++ include/hw/virtio/vhost-backend.h | 4 ++ include/hw/virtio/virtio-scsi.h | 1 + include/standard-headers/linux/vhost_types.h | 12 ++++ linux-headers/linux/vhost.h | 11 ++++ 6 files changed, 101 insertions(+) diff --git a/hw/scsi/vhost-scsi.c b/hw/scsi/vhost-scsi.c index 039caf2614eb..74363f9a519e 100644 --- a/hw/scsi/vhost-scsi.c +++ b/hw/scsi/vhost-scsi.c @@ -163,6 +163,62 @@ static const VMStateDescription vmstate_virtio_vhost_scsi = { .pre_save = vhost_scsi_pre_save, }; +static int vhost_scsi_set_workers(VHostSCSICommon *vsc, int vq_workers) +{ + struct vhost_dev *dev = &vsc->dev; + int workers_per_queue = 1, io_queues; + struct vhost_vring_worker w; + int i, ret, cnt = 0; + + if (vq_workers < VHOST_VRING_NEW_WORKER) + return -EINVAL; + + if (vq_workers == 0 || + dev->nvqs == VHOST_SCSI_VQ_NUM_FIXED + 1) + /* Use the single default worker */ + return 0; + + io_queues = dev->nvqs - VHOST_SCSI_VQ_NUM_FIXED; + if (vq_workers > 0 && io_queues > vq_workers) + workers_per_queue = io_queues / vq_workers; + + w.pid = VHOST_VRING_NEW_WORKER; + /* + * ctl/evt share the first worker since it will be rare for them + * to send cmds while IO is running. The rest of the vqs get their + * own worker. + */ + for (i = VHOST_SCSI_VQ_NUM_FIXED + 1; i < dev->nvqs; i++) { + w.index = i; + + switch (vq_workers) { + case VHOST_VRING_NEW_WORKER: + w.pid = VHOST_VRING_NEW_WORKER; + break; + default: + /* + * TODO: we should get the ISR to vq mapping and bind workers + * so vqs sharing a ISR share a worker. + */ + if (cnt == workers_per_queue) { + w.pid = VHOST_VRING_NEW_WORKER; + cnt = 0; + } else { + cnt++; + } + } + + ret = dev->vhost_ops->vhost_set_vring_worker(dev, &w); + if (ret == -ENOTTY) { + ret = 0; + break; + } else if (ret) + break; + } + + return ret; +} + static void vhost_scsi_realize(DeviceState *dev, Error **errp) { VirtIOSCSICommon *vs = VIRTIO_SCSI_COMMON(dev); @@ -223,6 +279,13 @@ static void vhost_scsi_realize(DeviceState *dev, Error **errp) goto free_vqs; } + ret = vhost_scsi_set_workers(vsc, vs->conf.virtqueue_workers); + if (ret < 0) { + error_setg(errp, "vhost-scsi: vhost worker setup failed: %s", + strerror(-ret)); + goto free_vqs; + } + /* At present, channel and lun both are 0 for bootable vhost-scsi disk */ vsc->channel = 0; vsc->lun = 0; @@ -281,6 +344,8 @@ static Property vhost_scsi_properties[] = { VIRTIO_SCSI_F_T10_PI, false), DEFINE_PROP_BOOL("migratable", VHostSCSICommon, migratable, false), + DEFINE_PROP_INT32("virtqueue_workers", VirtIOSCSICommon, + conf.virtqueue_workers, 0), DEFINE_PROP_END_OF_LIST(), }; diff --git a/hw/virtio/vhost-backend.c b/hw/virtio/vhost-backend.c index b65f8f7e97bf..175ed1f1c3a8 100644 --- a/hw/virtio/vhost-backend.c +++ b/hw/virtio/vhost-backend.c @@ -152,6 +152,13 @@ static int vhost_kernel_set_vring_busyloop_timeout(struct vhost_dev *dev, return vhost_kernel_call(dev, VHOST_SET_VRING_BUSYLOOP_TIMEOUT, s); } +static int vhost_kernel_set_vring_worker(struct vhost_dev *dev, + struct vhost_vring_worker *worker) +{ + return vhost_kernel_call(dev, VHOST_SET_VRING_WORKER, worker); +} + + static int vhost_kernel_set_features(struct vhost_dev *dev, uint64_t features) { @@ -313,6 +320,7 @@ const VhostOps kernel_ops = { .vhost_set_vring_call = vhost_kernel_set_vring_call, .vhost_set_vring_busyloop_timeout vhost_kernel_set_vring_busyloop_timeout, + .vhost_set_vring_worker = vhost_kernel_set_vring_worker, .vhost_set_features = vhost_kernel_set_features, .vhost_get_features = vhost_kernel_get_features, .vhost_set_backend_cap = vhost_kernel_set_backend_cap, diff --git a/include/hw/virtio/vhost-backend.h b/include/hw/virtio/vhost-backend.h index 81bf3109f837..bede35cf4686 100644 --- a/include/hw/virtio/vhost-backend.h +++ b/include/hw/virtio/vhost-backend.h @@ -33,6 +33,7 @@ struct vhost_memory; struct vhost_vring_file; struct vhost_vring_state; struct vhost_vring_addr; +struct vhost_vring_worker; struct vhost_scsi_target; struct vhost_iotlb_msg; struct vhost_virtqueue; @@ -71,6 +72,8 @@ typedef int (*vhost_set_vring_call_op)(struct vhost_dev *dev, struct vhost_vring_file *file); typedef int (*vhost_set_vring_busyloop_timeout_op)(struct vhost_dev *dev, struct vhost_vring_state *r); +typedef int (*vhost_set_vring_worker_op)(struct vhost_dev *dev, + struct vhost_vring_worker *worker); typedef int (*vhost_set_features_op)(struct vhost_dev *dev, uint64_t features); typedef int (*vhost_get_features_op)(struct vhost_dev *dev, @@ -146,6 +149,7 @@ typedef struct VhostOps { vhost_set_vring_kick_op vhost_set_vring_kick; vhost_set_vring_call_op vhost_set_vring_call; vhost_set_vring_busyloop_timeout_op vhost_set_vring_busyloop_timeout; + vhost_set_vring_worker_op vhost_set_vring_worker; vhost_set_features_op vhost_set_features; vhost_get_features_op vhost_get_features; vhost_set_backend_cap_op vhost_set_backend_cap; diff --git a/include/hw/virtio/virtio-scsi.h b/include/hw/virtio/virtio-scsi.h index 543681bc1838..694221601dad 100644 --- a/include/hw/virtio/virtio-scsi.h +++ b/include/hw/virtio/virtio-scsi.h @@ -58,6 +58,7 @@ struct VirtIOSCSIConf { #ifdef CONFIG_VHOST_SCSI char *vhostfd; char *wwpn; + int virtqueue_workers; #endif CharBackend chardev; uint32_t boot_tpgt; diff --git a/include/standard-headers/linux/vhost_types.h b/include/standard-headers/linux/vhost_types.h index 0bd2684a2ae4..0b844969a524 100644 --- a/include/standard-headers/linux/vhost_types.h +++ b/include/standard-headers/linux/vhost_types.h @@ -27,6 +27,18 @@ struct vhost_vring_file { }; +#define VHOST_VRING_NEW_WORKER -1 + +struct vhost_vring_worker { + unsigned int index; + /* + * The pid of the vhost worker that the vq will be bound to. If + * pid is VHOST_VRING_NEW_WORKER a new worker will be created and it's + * pid will be returned in pid. + */ + pid_t pid; +}; + struct vhost_vring_addr { unsigned int index; /* Option flags. */ diff --git a/linux-headers/linux/vhost.h b/linux-headers/linux/vhost.h index c998860d7bbc..6823f3b5309c 100644 --- a/linux-headers/linux/vhost.h +++ b/linux-headers/linux/vhost.h @@ -70,6 +70,17 @@ #define VHOST_VRING_BIG_ENDIAN 1 #define VHOST_SET_VRING_ENDIAN _IOW(VHOST_VIRTIO, 0x13, struct vhost_vring_state) #define VHOST_GET_VRING_ENDIAN _IOW(VHOST_VIRTIO, 0x14, struct vhost_vring_state) +/* By default, a device gets one vhost_worker created during VHOST_SET_OWNER + * that its virtqueues share. This allows userspace to create a vhost_worker + * and bind a virtqueue to it or bind a virtqueue to an existing worker. + * + * If pid > 0 and it matches an existing vhost_worker thread it will be bound + * to the virtqueue. If pid is VHOST_VRING_NEW_WORKER, then a new worker will be + * created and bound to the virtqueue. + * + * This must be called after VHOST_SET_OWNER and before the virtqueue is active. + */ +#define VHOST_SET_VRING_WORKER _IOWR(VHOST_VIRTIO, 0x15, struct vhost_vring_worker) /* The following ioctls use eventfd file descriptors to signal and poll * for events. */ -- 2.25.1
Mike Christie
2021-Oct-22 05:19 UTC
[PATCH V3 01/11] vhost: add vhost_worker pointer to vhost_virtqueue
This patchset allows userspace to map vqs to different workers. This
patch adds a worker pointer to the vq so we can store that info.
Signed-off-by: Mike Christie <michael.christie at oracle.com>
---
drivers/vhost/vhost.c | 24 +++++++++++++-----------
drivers/vhost/vhost.h | 1 +
2 files changed, 14 insertions(+), 11 deletions(-)
diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c
index 9aa04fcdf210..9b4e7d74dab4 100644
--- a/drivers/vhost/vhost.c
+++ b/drivers/vhost/vhost.c
@@ -496,6 +496,7 @@ void vhost_dev_init(struct vhost_dev *dev,
vq->log = NULL;
vq->indirect = NULL;
vq->heads = NULL;
+ vq->worker = NULL;
vq->dev = dev;
mutex_init(&vq->mutex);
vhost_vq_reset(dev, vq);
@@ -574,15 +575,14 @@ static void vhost_worker_free(struct vhost_dev *dev)
kfree(worker);
}
-static int vhost_worker_create(struct vhost_dev *dev)
+static struct vhost_worker *vhost_worker_create(struct vhost_dev *dev)
{
struct vhost_worker *worker;
struct task_struct *task;
- int ret;
worker = kzalloc(sizeof(*worker), GFP_KERNEL_ACCOUNT);
if (!worker)
- return -ENOMEM;
+ return NULL;
dev->worker = worker;
worker->kcov_handle = kcov_common_handle();
@@ -594,25 +594,24 @@ static int vhost_worker_create(struct vhost_dev *dev)
*/
task = kernel_worker(vhost_worker, worker, NUMA_NO_NODE, CLONE_FS,
KERN_WORKER_NO_FILES | KERN_WORKER_SIG_IGN);
- if (IS_ERR(task)) {
- ret = PTR_ERR(task);
+ if (IS_ERR(task))
goto free_worker;
- }
worker->task = task;
kernel_worker_start(task, "vhost-%d", current->pid);
- return 0;
+ return worker;
free_worker:
kfree(worker);
dev->worker = NULL;
- return ret;
+ return NULL;
}
/* Caller should have device mutex */
long vhost_dev_set_owner(struct vhost_dev *dev)
{
- int err;
+ struct vhost_worker *worker;
+ int err, i;
/* Is there an owner already? */
if (vhost_dev_has_owner(dev)) {
@@ -623,9 +622,12 @@ long vhost_dev_set_owner(struct vhost_dev *dev)
vhost_attach_mm(dev);
if (dev->use_worker) {
- err = vhost_worker_create(dev);
- if (err)
+ worker = vhost_worker_create(dev);
+ if (!worker)
goto err_worker;
+
+ for (i = 0; i < dev->nvqs; i++)
+ dev->vqs[i]->worker = worker;
}
err = vhost_dev_alloc_iovecs(dev);
diff --git a/drivers/vhost/vhost.h b/drivers/vhost/vhost.h
index 09748694cb66..7ee38b4a2807 100644
--- a/drivers/vhost/vhost.h
+++ b/drivers/vhost/vhost.h
@@ -80,6 +80,7 @@ struct vhost_vring_call {
/* The virtqueue structure describes a queue attached to a device. */
struct vhost_virtqueue {
struct vhost_dev *dev;
+ struct vhost_worker *worker;
/* The actual ring of buffers. */
struct mutex mutex;
--
2.25.1
Mike Christie
2021-Oct-22 05:19 UTC
[PATCH V3 02/11] vhost, vhost-net: add helper to check if vq has work
This adds a helper to check if a vq has work pending and converts
vhost-net to use it.
Signed-off-by: Mike Christie <michael.christie at oracle.com>
---
drivers/vhost/net.c | 2 +-
drivers/vhost/vhost.c | 6 +++---
drivers/vhost/vhost.h | 2 +-
3 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c
index 28ef323882fb..6c4b2b2158bb 100644
--- a/drivers/vhost/net.c
+++ b/drivers/vhost/net.c
@@ -543,7 +543,7 @@ static void vhost_net_busy_poll(struct vhost_net *net,
endtime = busy_clock() + busyloop_timeout;
while (vhost_can_busy_poll(endtime)) {
- if (vhost_has_work(&net->dev)) {
+ if (vhost_vq_has_work(vq)) {
*busyloop_intr = true;
break;
}
diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c
index 9b4e7d74dab4..f6bfa1c481df 100644
--- a/drivers/vhost/vhost.c
+++ b/drivers/vhost/vhost.c
@@ -269,11 +269,11 @@ void vhost_work_queue(struct vhost_dev *dev, struct
vhost_work *work)
EXPORT_SYMBOL_GPL(vhost_work_queue);
/* A lockless hint for busy polling code to exit the loop */
-bool vhost_has_work(struct vhost_dev *dev)
+bool vhost_vq_has_work(struct vhost_virtqueue *vq)
{
- return dev->worker &&
!llist_empty(&dev->worker->work_list);
+ return vq->worker &&
!llist_empty(&vq->worker->work_list);
}
-EXPORT_SYMBOL_GPL(vhost_has_work);
+EXPORT_SYMBOL_GPL(vhost_vq_has_work);
void vhost_poll_queue(struct vhost_poll *poll)
{
diff --git a/drivers/vhost/vhost.h b/drivers/vhost/vhost.h
index 7ee38b4a2807..37989518a07c 100644
--- a/drivers/vhost/vhost.h
+++ b/drivers/vhost/vhost.h
@@ -50,7 +50,6 @@ struct vhost_poll {
void vhost_work_init(struct vhost_work *work, vhost_work_fn_t fn);
void vhost_work_queue(struct vhost_dev *dev, struct vhost_work *work);
-bool vhost_has_work(struct vhost_dev *dev);
void vhost_poll_init(struct vhost_poll *poll, vhost_work_fn_t fn,
__poll_t mask, struct vhost_dev *dev);
@@ -200,6 +199,7 @@ int vhost_get_vq_desc(struct vhost_virtqueue *,
struct vhost_log *log, unsigned int *log_num);
void vhost_discard_vq_desc(struct vhost_virtqueue *, int n);
+bool vhost_vq_has_work(struct vhost_virtqueue *vq);
bool vhost_vq_is_setup(struct vhost_virtqueue *vq);
int vhost_vq_init_access(struct vhost_virtqueue *);
int vhost_add_used(struct vhost_virtqueue *, unsigned int head, int len);
--
2.25.1
Mike Christie
2021-Oct-22 05:19 UTC
[PATCH V3 03/11] vhost: take worker or vq instead of dev for queueing
This patch has the core work queueing function take a worker for when we
support multiple workers. It also adds a helper that takes a vq during
queueing so modules can control which vq/worker to queue work on.
This temp leaves vhost_work_queue. It will be removed when the drivers
are converted in the next patches.
Signed-off-by: Mike Christie <michael.christie at oracle.com>
---
drivers/vhost/vhost.c | 44 +++++++++++++++++++++++++++----------------
drivers/vhost/vhost.h | 1 +
2 files changed, 29 insertions(+), 16 deletions(-)
diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c
index f6bfa1c481df..f2c6981297d0 100644
--- a/drivers/vhost/vhost.c
+++ b/drivers/vhost/vhost.c
@@ -230,6 +230,34 @@ void vhost_poll_stop(struct vhost_poll *poll)
}
EXPORT_SYMBOL_GPL(vhost_poll_stop);
+static void vhost_work_queue_on(struct vhost_worker *worker,
+ struct vhost_work *work)
+{
+ if (!worker)
+ return;
+
+ if (!test_and_set_bit(VHOST_WORK_QUEUED, &work->flags)) {
+ /* We can only add the work to the list after we're
+ * sure it was not in the list.
+ * test_and_set_bit() implies a memory barrier.
+ */
+ llist_add(&work->node, &worker->work_list);
+ wake_up_process(worker->task);
+ }
+}
+
+void vhost_work_queue(struct vhost_dev *dev, struct vhost_work *work)
+{
+ vhost_work_queue_on(dev->worker, work);
+}
+EXPORT_SYMBOL_GPL(vhost_work_queue);
+
+void vhost_vq_work_queue(struct vhost_virtqueue *vq, struct vhost_work *work)
+{
+ vhost_work_queue_on(vq->worker, work);
+}
+EXPORT_SYMBOL_GPL(vhost_vq_work_queue);
+
void vhost_work_dev_flush(struct vhost_dev *dev)
{
struct vhost_flush_struct flush;
@@ -252,22 +280,6 @@ void vhost_poll_flush(struct vhost_poll *poll)
}
EXPORT_SYMBOL_GPL(vhost_poll_flush);
-void vhost_work_queue(struct vhost_dev *dev, struct vhost_work *work)
-{
- if (!dev->worker)
- return;
-
- if (!test_and_set_bit(VHOST_WORK_QUEUED, &work->flags)) {
- /* We can only add the work to the list after we're
- * sure it was not in the list.
- * test_and_set_bit() implies a memory barrier.
- */
- llist_add(&work->node, &dev->worker->work_list);
- wake_up_process(dev->worker->task);
- }
-}
-EXPORT_SYMBOL_GPL(vhost_work_queue);
-
/* A lockless hint for busy polling code to exit the loop */
bool vhost_vq_has_work(struct vhost_virtqueue *vq)
{
diff --git a/drivers/vhost/vhost.h b/drivers/vhost/vhost.h
index 37989518a07c..8f209d1c8890 100644
--- a/drivers/vhost/vhost.h
+++ b/drivers/vhost/vhost.h
@@ -199,6 +199,7 @@ int vhost_get_vq_desc(struct vhost_virtqueue *,
struct vhost_log *log, unsigned int *log_num);
void vhost_discard_vq_desc(struct vhost_virtqueue *, int n);
+void vhost_vq_work_queue(struct vhost_virtqueue *vq, struct vhost_work *work);
bool vhost_vq_has_work(struct vhost_virtqueue *vq);
bool vhost_vq_is_setup(struct vhost_virtqueue *vq);
int vhost_vq_init_access(struct vhost_virtqueue *);
--
2.25.1
Mike Christie
2021-Oct-22 05:19 UTC
[PATCH V3 04/11] vhost: take worker or vq instead of dev for flushing
This patch has the core work flush function take a worker for when we
support multiple workers. It also adds a helper that takes a vq during
flushing so modules can control which vq/worker to flush.
This temp leaves vhost_work_dev_flush. It will be removed when the drivers
are converted in the next patches.
Signed-off-by: Mike Christie <michael.christie at oracle.com>
---
drivers/vhost/vhost.c | 30 +++++++++++++++++++++---------
drivers/vhost/vhost.h | 1 +
2 files changed, 22 insertions(+), 9 deletions(-)
diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c
index f2c6981297d0..e4d765f6c821 100644
--- a/drivers/vhost/vhost.c
+++ b/drivers/vhost/vhost.c
@@ -246,6 +246,26 @@ static void vhost_work_queue_on(struct vhost_worker
*worker,
}
}
+static void vhost_work_flush_on(struct vhost_worker *worker)
+{
+ struct vhost_flush_struct flush;
+
+ if (!worker)
+ return;
+
+ init_completion(&flush.wait_event);
+ vhost_work_init(&flush.work, vhost_flush_work);
+
+ vhost_work_queue_on(worker, &flush.work);
+ wait_for_completion(&flush.wait_event);
+}
+
+void vhost_vq_work_flush(struct vhost_virtqueue *vq)
+{
+ vhost_work_flush_on(vq->worker);
+}
+EXPORT_SYMBOL_GPL(vhost_vq_work_flush);
+
void vhost_work_queue(struct vhost_dev *dev, struct vhost_work *work)
{
vhost_work_queue_on(dev->worker, work);
@@ -260,15 +280,7 @@ EXPORT_SYMBOL_GPL(vhost_vq_work_queue);
void vhost_work_dev_flush(struct vhost_dev *dev)
{
- struct vhost_flush_struct flush;
-
- if (dev->worker) {
- init_completion(&flush.wait_event);
- vhost_work_init(&flush.work, vhost_flush_work);
-
- vhost_work_queue(dev, &flush.work);
- wait_for_completion(&flush.wait_event);
- }
+ vhost_work_flush_on(dev->worker);
}
EXPORT_SYMBOL_GPL(vhost_work_dev_flush);
diff --git a/drivers/vhost/vhost.h b/drivers/vhost/vhost.h
index 8f209d1c8890..a985caa35633 100644
--- a/drivers/vhost/vhost.h
+++ b/drivers/vhost/vhost.h
@@ -199,6 +199,7 @@ int vhost_get_vq_desc(struct vhost_virtqueue *,
struct vhost_log *log, unsigned int *log_num);
void vhost_discard_vq_desc(struct vhost_virtqueue *, int n);
+void vhost_vq_work_flush(struct vhost_virtqueue *vq);
void vhost_vq_work_queue(struct vhost_virtqueue *vq, struct vhost_work *work);
bool vhost_vq_has_work(struct vhost_virtqueue *vq);
bool vhost_vq_is_setup(struct vhost_virtqueue *vq);
--
2.25.1
Mike Christie
2021-Oct-22 05:19 UTC
[PATCH V3 05/11] vhost: convert poll work to be vq based
This has the drivers pass in their poll to vq mapping and then converts
the core poll code to use the vq based helpers.
Signed-off-by: Mike Christie <michael.christie at oracle.com>
---
drivers/vhost/net.c | 6 ++++--
drivers/vhost/vhost.c | 10 ++++++----
drivers/vhost/vhost.h | 4 +++-
3 files changed, 13 insertions(+), 7 deletions(-)
diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c
index 6c4b2b2158bb..2e1abab45f3c 100644
--- a/drivers/vhost/net.c
+++ b/drivers/vhost/net.c
@@ -1339,8 +1339,10 @@ static int vhost_net_open(struct inode *inode, struct
file *f)
VHOST_NET_PKT_WEIGHT, VHOST_NET_WEIGHT, true,
NULL);
- vhost_poll_init(n->poll + VHOST_NET_VQ_TX, handle_tx_net, EPOLLOUT, dev);
- vhost_poll_init(n->poll + VHOST_NET_VQ_RX, handle_rx_net, EPOLLIN, dev);
+ vhost_poll_init(n->poll + VHOST_NET_VQ_TX, handle_tx_net, EPOLLOUT, dev,
+ vqs[VHOST_NET_VQ_TX]);
+ vhost_poll_init(n->poll + VHOST_NET_VQ_RX, handle_rx_net, EPOLLIN, dev,
+ vqs[VHOST_NET_VQ_RX]);
f->private_data = n;
n->page_frag.page = NULL;
diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c
index e4d765f6c821..c84024afefff 100644
--- a/drivers/vhost/vhost.c
+++ b/drivers/vhost/vhost.c
@@ -186,13 +186,15 @@ EXPORT_SYMBOL_GPL(vhost_work_init);
/* Init poll structure */
void vhost_poll_init(struct vhost_poll *poll, vhost_work_fn_t fn,
- __poll_t mask, struct vhost_dev *dev)
+ __poll_t mask, struct vhost_dev *dev,
+ struct vhost_virtqueue *vq)
{
init_waitqueue_func_entry(&poll->wait, vhost_poll_wakeup);
init_poll_funcptr(&poll->table, vhost_poll_func);
poll->mask = mask;
poll->dev = dev;
poll->wqh = NULL;
+ poll->vq = vq;
vhost_work_init(&poll->work, fn);
}
@@ -288,7 +290,7 @@ EXPORT_SYMBOL_GPL(vhost_work_dev_flush);
* locks that are also used by the callback. */
void vhost_poll_flush(struct vhost_poll *poll)
{
- vhost_work_dev_flush(poll->dev);
+ vhost_vq_work_flush(poll->vq);
}
EXPORT_SYMBOL_GPL(vhost_poll_flush);
@@ -301,7 +303,7 @@ EXPORT_SYMBOL_GPL(vhost_vq_has_work);
void vhost_poll_queue(struct vhost_poll *poll)
{
- vhost_work_queue(poll->dev, &poll->work);
+ vhost_vq_work_queue(poll->vq, &poll->work);
}
EXPORT_SYMBOL_GPL(vhost_poll_queue);
@@ -526,7 +528,7 @@ void vhost_dev_init(struct vhost_dev *dev,
vhost_vq_reset(dev, vq);
if (vq->handle_kick)
vhost_poll_init(&vq->poll, vq->handle_kick,
- EPOLLIN, dev);
+ EPOLLIN, dev, vq);
}
}
EXPORT_SYMBOL_GPL(vhost_dev_init);
diff --git a/drivers/vhost/vhost.h b/drivers/vhost/vhost.h
index a985caa35633..d9650da2be2c 100644
--- a/drivers/vhost/vhost.h
+++ b/drivers/vhost/vhost.h
@@ -46,13 +46,15 @@ struct vhost_poll {
struct vhost_work work;
__poll_t mask;
struct vhost_dev *dev;
+ struct vhost_virtqueue *vq;
};
void vhost_work_init(struct vhost_work *work, vhost_work_fn_t fn);
void vhost_work_queue(struct vhost_dev *dev, struct vhost_work *work);
void vhost_poll_init(struct vhost_poll *poll, vhost_work_fn_t fn,
- __poll_t mask, struct vhost_dev *dev);
+ __poll_t mask, struct vhost_dev *dev,
+ struct vhost_virtqueue *vq);
int vhost_poll_start(struct vhost_poll *poll, struct file *file);
void vhost_poll_stop(struct vhost_poll *poll);
void vhost_poll_flush(struct vhost_poll *poll);
--
2.25.1
Convert from vhost dev based helpers to vq ones. Signed-off-by: Mike Christie <michael.christie at oracle.com> --- drivers/vhost/vsock.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/vhost/vsock.c b/drivers/vhost/vsock.c index 938aefbc75ec..c50c60d0955e 100644 --- a/drivers/vhost/vsock.c +++ b/drivers/vhost/vsock.c @@ -300,7 +300,7 @@ vhost_transport_send_pkt(struct virtio_vsock_pkt *pkt) list_add_tail(&pkt->list, &vsock->send_pkt_list); spin_unlock_bh(&vsock->send_pkt_list_lock); - vhost_work_queue(&vsock->dev, &vsock->send_pkt_work); + vhost_vq_work_queue(&vsock->vqs[VSOCK_VQ_TX], &vsock->send_pkt_work); rcu_read_unlock(); return len; @@ -612,7 +612,7 @@ static int vhost_vsock_start(struct vhost_vsock *vsock) /* Some packets may have been queued before the device was started, * let's kick the send worker to send them. */ - vhost_work_queue(&vsock->dev, &vsock->send_pkt_work); + vhost_vq_work_queue(&vsock->vqs[VSOCK_VQ_TX], &vsock->send_pkt_work); mutex_unlock(&vsock->dev.mutex); return 0; @@ -712,7 +712,9 @@ static void vhost_vsock_flush(struct vhost_vsock *vsock) for (i = 0; i < ARRAY_SIZE(vsock->vqs); i++) if (vsock->vqs[i].handle_kick) vhost_poll_flush(&vsock->vqs[i].poll); - vhost_work_dev_flush(&vsock->dev); + + vhost_vq_work_flush(&vsock->vqs[VSOCK_VQ_TX]); + vhost_vq_work_flush(&vsock->vqs[VSOCK_VQ_RX]); } static void vhost_vsock_reset_orphans(struct sock *sk) -- 2.25.1
Mike Christie
2021-Oct-22 05:19 UTC
[PATCH V3 07/11] vhost-scsi: make SCSI cmd completion per vq
This patch separates the scsi cmd completion code paths so we can complete
cmds based on their vq instead of having all cmds complete on the same
worker/CPU. This will be useful with the next patches that allow us to
create mulitple worker threads and bind them to different vqs, so we can
have completions running on different threads/CPUs.
Signed-off-by: Mike Christie <michael.christie at oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha at redhat.com>
---
drivers/vhost/scsi.c | 48 +++++++++++++++++++++++---------------------
1 file changed, 25 insertions(+), 23 deletions(-)
diff --git a/drivers/vhost/scsi.c b/drivers/vhost/scsi.c
index 532e204f2b1b..0d85ddb68420 100644
--- a/drivers/vhost/scsi.c
+++ b/drivers/vhost/scsi.c
@@ -164,6 +164,7 @@ enum {
struct vhost_scsi_virtqueue {
struct vhost_virtqueue vq;
+ struct vhost_scsi *vs;
/*
* Reference counting for inflight reqs, used for flush operation. At
* each time, one reference tracks new commands submitted, while we
@@ -178,6 +179,9 @@ struct vhost_scsi_virtqueue {
struct vhost_scsi_cmd *scsi_cmds;
struct sbitmap scsi_tags;
int max_cmds;
+
+ struct vhost_work completion_work;
+ struct llist_head completion_list;
};
struct vhost_scsi {
@@ -188,9 +192,6 @@ struct vhost_scsi {
struct vhost_dev dev;
struct vhost_scsi_virtqueue vqs[VHOST_SCSI_MAX_VQ];
- struct vhost_work vs_completion_work; /* cmd completion work item */
- struct llist_head vs_completion_list; /* cmd completion queue */
-
struct vhost_work vs_event_work; /* evt injection work item */
struct llist_head vs_event_list; /* evt injection queue */
@@ -365,10 +366,11 @@ static void vhost_scsi_release_cmd(struct se_cmd *se_cmd)
} else {
struct vhost_scsi_cmd *cmd = container_of(se_cmd,
struct vhost_scsi_cmd, tvc_se_cmd);
- struct vhost_scsi *vs = cmd->tvc_vhost;
+ struct vhost_scsi_virtqueue *svq = container_of(cmd->tvc_vq,
+ struct vhost_scsi_virtqueue, vq);
- llist_add(&cmd->tvc_completion_list, &vs->vs_completion_list);
- vhost_work_queue(&vs->dev, &vs->vs_completion_work);
+ llist_add(&cmd->tvc_completion_list, &svq->completion_list);
+ vhost_vq_work_queue(&svq->vq, &svq->completion_work);
}
}
@@ -531,18 +533,17 @@ static void vhost_scsi_evt_work(struct vhost_work *work)
*/
static void vhost_scsi_complete_cmd_work(struct vhost_work *work)
{
- struct vhost_scsi *vs = container_of(work, struct vhost_scsi,
- vs_completion_work);
- DECLARE_BITMAP(signal, VHOST_SCSI_MAX_VQ);
+ struct vhost_scsi_virtqueue *svq = container_of(work,
+ struct vhost_scsi_virtqueue, completion_work);
struct virtio_scsi_cmd_resp v_rsp;
struct vhost_scsi_cmd *cmd, *t;
struct llist_node *llnode;
struct se_cmd *se_cmd;
struct iov_iter iov_iter;
- int ret, vq;
+ bool signal = false;
+ int ret;
- bitmap_zero(signal, VHOST_SCSI_MAX_VQ);
- llnode = llist_del_all(&vs->vs_completion_list);
+ llnode = llist_del_all(&svq->completion_list);
llist_for_each_entry_safe(cmd, t, llnode, tvc_completion_list) {
se_cmd = &cmd->tvc_se_cmd;
@@ -562,21 +563,16 @@ static void vhost_scsi_complete_cmd_work(struct vhost_work
*work)
cmd->tvc_in_iovs, sizeof(v_rsp));
ret = copy_to_iter(&v_rsp, sizeof(v_rsp), &iov_iter);
if (likely(ret == sizeof(v_rsp))) {
- struct vhost_scsi_virtqueue *q;
+ signal = true;
vhost_add_used(cmd->tvc_vq, cmd->tvc_vq_desc, 0);
- q = container_of(cmd->tvc_vq, struct vhost_scsi_virtqueue, vq);
- vq = q - vs->vqs;
- __set_bit(vq, signal);
} else
pr_err("Faulted on virtio_scsi_cmd_resp\n");
vhost_scsi_release_cmd_res(se_cmd);
}
- vq = -1;
- while ((vq = find_next_bit(signal, VHOST_SCSI_MAX_VQ, vq + 1))
- < VHOST_SCSI_MAX_VQ)
- vhost_signal(&vs->dev, &vs->vqs[vq].vq);
+ if (signal)
+ vhost_signal(&svq->vs->dev, &svq->vq);
}
static struct vhost_scsi_cmd *
@@ -1776,6 +1772,7 @@ static int vhost_scsi_set_features(struct vhost_scsi *vs,
u64 features)
static int vhost_scsi_open(struct inode *inode, struct file *f)
{
+ struct vhost_scsi_virtqueue *svq;
struct vhost_scsi *vs;
struct vhost_virtqueue **vqs;
int r = -ENOMEM, i;
@@ -1788,7 +1785,6 @@ static int vhost_scsi_open(struct inode *inode, struct
file *f)
if (!vqs)
goto err_vqs;
- vhost_work_init(&vs->vs_completion_work, vhost_scsi_complete_cmd_work);
vhost_work_init(&vs->vs_event_work, vhost_scsi_evt_work);
vs->vs_events_nr = 0;
@@ -1799,8 +1795,14 @@ static int vhost_scsi_open(struct inode *inode, struct
file *f)
vs->vqs[VHOST_SCSI_VQ_CTL].vq.handle_kick = vhost_scsi_ctl_handle_kick;
vs->vqs[VHOST_SCSI_VQ_EVT].vq.handle_kick = vhost_scsi_evt_handle_kick;
for (i = VHOST_SCSI_VQ_IO; i < VHOST_SCSI_MAX_VQ; i++) {
- vqs[i] = &vs->vqs[i].vq;
- vs->vqs[i].vq.handle_kick = vhost_scsi_handle_kick;
+ svq = &vs->vqs[i];
+
+ vqs[i] = &svq->vq;
+ svq->vs = vs;
+ init_llist_head(&svq->completion_list);
+ vhost_work_init(&svq->completion_work,
+ vhost_scsi_complete_cmd_work);
+ svq->vq.handle_kick = vhost_scsi_handle_kick;
}
vhost_dev_init(&vs->dev, vqs, VHOST_SCSI_MAX_VQ, UIO_MAXIOV,
VHOST_SCSI_WEIGHT, 0, true, NULL);
--
2.25.1
Convert from vhost dev based helpers to vq ones.
Signed-off-by: Mike Christie <michael.christie at oracle.com>
---
drivers/vhost/scsi.c | 27 +++++++++++++--------------
1 file changed, 13 insertions(+), 14 deletions(-)
diff --git a/drivers/vhost/scsi.c b/drivers/vhost/scsi.c
index 0d85ddb68420..08beba73ada4 100644
--- a/drivers/vhost/scsi.c
+++ b/drivers/vhost/scsi.c
@@ -361,8 +361,9 @@ static void vhost_scsi_release_cmd(struct se_cmd *se_cmd)
if (se_cmd->se_cmd_flags & SCF_SCSI_TMR_CDB) {
struct vhost_scsi_tmf *tmf = container_of(se_cmd,
struct vhost_scsi_tmf, se_cmd);
+ struct vhost_virtqueue *vq = &tmf->svq->vq;
- vhost_work_queue(&tmf->vhost->dev, &tmf->vwork);
+ vhost_vq_work_queue(vq, &tmf->vwork);
} else {
struct vhost_scsi_cmd *cmd = container_of(se_cmd,
struct vhost_scsi_cmd, tvc_se_cmd);
@@ -1360,11 +1361,9 @@ static void vhost_scsi_ctl_handle_kick(struct vhost_work
*work)
}
static void
-vhost_scsi_send_evt(struct vhost_scsi *vs,
- struct vhost_scsi_tpg *tpg,
- struct se_lun *lun,
- u32 event,
- u32 reason)
+vhost_scsi_send_evt(struct vhost_scsi *vs, struct vhost_virtqueue *vq,
+ struct vhost_scsi_tpg *tpg, struct se_lun *lun,
+ u32 event, u32 reason)
{
struct vhost_scsi_evt *evt;
@@ -1386,7 +1385,7 @@ vhost_scsi_send_evt(struct vhost_scsi *vs,
}
llist_add(&evt->list, &vs->vs_event_list);
- vhost_work_queue(&vs->dev, &vs->vs_event_work);
+ vhost_vq_work_queue(vq, &vs->vs_event_work);
}
static void vhost_scsi_evt_handle_kick(struct vhost_work *work)
@@ -1400,7 +1399,8 @@ static void vhost_scsi_evt_handle_kick(struct vhost_work
*work)
goto out;
if (vs->vs_events_missed)
- vhost_scsi_send_evt(vs, NULL, NULL, VIRTIO_SCSI_T_NO_EVENT, 0);
+ vhost_scsi_send_evt(vs, vq, NULL, NULL, VIRTIO_SCSI_T_NO_EVENT,
+ 0);
out:
mutex_unlock(&vq->mutex);
}
@@ -1428,11 +1428,10 @@ static void vhost_scsi_flush(struct vhost_scsi *vs)
* indicate the start of the flush operation so that it will reach 0
* when all the reqs are finished.
*/
- for (i = 0; i < VHOST_SCSI_MAX_VQ; i++)
+ for (i = 0; i < VHOST_SCSI_MAX_VQ; i++) {
kref_put(&old_inflight[i]->kref, vhost_scsi_done_inflight);
-
- /* Flush both the vhost poll and vhost work */
- vhost_work_dev_flush(&vs->dev);
+ vhost_vq_work_flush(&vs->vqs[i].vq);
+ }
/* Wait for all reqs issued before the flush to be finished */
for (i = 0; i < VHOST_SCSI_MAX_VQ; i++)
@@ -1967,8 +1966,8 @@ vhost_scsi_do_plug(struct vhost_scsi_tpg *tpg,
vq = &vs->vqs[VHOST_SCSI_VQ_EVT].vq;
mutex_lock(&vq->mutex);
if (vhost_has_feature(vq, VIRTIO_SCSI_F_HOTPLUG))
- vhost_scsi_send_evt(vs, tpg, lun,
- VIRTIO_SCSI_T_TRANSPORT_RESET, reason);
+ vhost_scsi_send_evt(vs, vq, tpg, lun,
+ VIRTIO_SCSI_T_TRANSPORT_RESET, reason);
mutex_unlock(&vq->mutex);
mutex_unlock(&vs->dev.mutex);
}
--
2.25.1
Mike Christie
2021-Oct-22 05:19 UTC
[PATCH V3 09/11] vhost-scsi: flush IO vqs then send TMF rsp
With one worker we will always send the scsi cmd responses then send the
TMF rsp, because LIO will always complete the scsi cmds first then call
into us to send the TMF response.
With multiple workers, one of the IO vq threads could be run after the
TMF is queued, so this has us flush all the IO vqs before sending the TMF
response.
Signed-off-by: Mike Christie <michael.christie at oracle.com>
---
drivers/vhost/scsi.c | 22 +++++++++++++++++++---
1 file changed, 19 insertions(+), 3 deletions(-)
diff --git a/drivers/vhost/scsi.c b/drivers/vhost/scsi.c
index 08beba73ada4..29d9adcdb4fc 100644
--- a/drivers/vhost/scsi.c
+++ b/drivers/vhost/scsi.c
@@ -1153,12 +1153,28 @@ static void vhost_scsi_tmf_resp_work(struct vhost_work
*work)
{
struct vhost_scsi_tmf *tmf = container_of(work, struct vhost_scsi_tmf,
vwork);
- int resp_code;
+ struct vhost_virtqueue *ctl_vq, *vq;
+ int resp_code, i;
+
+ if (tmf->scsi_resp == TMR_FUNCTION_COMPLETE) {
+ /*
+ * Flush IO vqs that don't share a worker with the ctl to make
+ * sure they have sent their responses before us.
+ */
+ ctl_vq = &tmf->vhost->vqs[VHOST_SCSI_VQ_CTL].vq;
+ for (i = VHOST_SCSI_VQ_IO; i < tmf->vhost->dev.nvqs; i++) {
+ vq = &tmf->vhost->vqs[i].vq;
+
+ if (vhost_vq_is_setup(vq) &&
+ vq->worker != ctl_vq->worker) {
+ vhost_vq_work_flush(vq);
+ }
+ }
- if (tmf->scsi_resp == TMR_FUNCTION_COMPLETE)
resp_code = VIRTIO_SCSI_S_FUNCTION_SUCCEEDED;
- else
+ } else {
resp_code = VIRTIO_SCSI_S_FUNCTION_REJECTED;
+ }
vhost_scsi_send_tmf_resp(tmf->vhost, &tmf->svq->vq,
tmf->in_iovs,
tmf->vq_desc, &tmf->resp_iov, resp_code);
--
2.25.1
Mike Christie
2021-Oct-22 05:19 UTC
[PATCH V3 10/11] vhost: remove device wide queu/flushing helpers
vhost_work_queue and vhost_work_dev_flush are no longer used, so drop
them.
Signed-off-by: Mike Christie <michael.christie at oracle.com>
---
drivers/vhost/vhost.c | 12 ------------
drivers/vhost/vhost.h | 2 --
2 files changed, 14 deletions(-)
diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c
index c84024afefff..04f43a6445e1 100644
--- a/drivers/vhost/vhost.c
+++ b/drivers/vhost/vhost.c
@@ -268,24 +268,12 @@ void vhost_vq_work_flush(struct vhost_virtqueue *vq)
}
EXPORT_SYMBOL_GPL(vhost_vq_work_flush);
-void vhost_work_queue(struct vhost_dev *dev, struct vhost_work *work)
-{
- vhost_work_queue_on(dev->worker, work);
-}
-EXPORT_SYMBOL_GPL(vhost_work_queue);
-
void vhost_vq_work_queue(struct vhost_virtqueue *vq, struct vhost_work *work)
{
vhost_work_queue_on(vq->worker, work);
}
EXPORT_SYMBOL_GPL(vhost_vq_work_queue);
-void vhost_work_dev_flush(struct vhost_dev *dev)
-{
- vhost_work_flush_on(dev->worker);
-}
-EXPORT_SYMBOL_GPL(vhost_work_dev_flush);
-
/* Flush any work that has been scheduled. When calling this, don't hold
any
* locks that are also used by the callback. */
void vhost_poll_flush(struct vhost_poll *poll)
diff --git a/drivers/vhost/vhost.h b/drivers/vhost/vhost.h
index d9650da2be2c..33c63b24187a 100644
--- a/drivers/vhost/vhost.h
+++ b/drivers/vhost/vhost.h
@@ -50,7 +50,6 @@ struct vhost_poll {
};
void vhost_work_init(struct vhost_work *work, vhost_work_fn_t fn);
-void vhost_work_queue(struct vhost_dev *dev, struct vhost_work *work);
void vhost_poll_init(struct vhost_poll *poll, vhost_work_fn_t fn,
__poll_t mask, struct vhost_dev *dev,
@@ -59,7 +58,6 @@ int vhost_poll_start(struct vhost_poll *poll, struct file
*file);
void vhost_poll_stop(struct vhost_poll *poll);
void vhost_poll_flush(struct vhost_poll *poll);
void vhost_poll_queue(struct vhost_poll *poll);
-void vhost_work_dev_flush(struct vhost_dev *dev);
struct vhost_log {
u64 addr;
--
2.25.1
Mike Christie
2021-Oct-22 05:19 UTC
[PATCH V3 11/11] vhost: allow userspace to create workers
This patch allows userspace to create workers and bind them to vqs. You
can have N workers per dev and also share N workers with M vqs.
Signed-off-by: Mike Christie <michael.christie at oracle.com>
---
drivers/vhost/vhost.c | 99 ++++++++++++++++++++++++++++----
drivers/vhost/vhost.h | 2 +-
include/uapi/linux/vhost.h | 11 ++++
include/uapi/linux/vhost_types.h | 12 ++++
4 files changed, 112 insertions(+), 12 deletions(-)
diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c
index 04f43a6445e1..c86e88d7f35c 100644
--- a/drivers/vhost/vhost.c
+++ b/drivers/vhost/vhost.c
@@ -493,7 +493,6 @@ void vhost_dev_init(struct vhost_dev *dev,
dev->umem = NULL;
dev->iotlb = NULL;
dev->mm = NULL;
- dev->worker = NULL;
dev->iov_limit = iov_limit;
dev->weight = weight;
dev->byte_weight = byte_weight;
@@ -576,20 +575,40 @@ static void vhost_worker_stop(struct vhost_worker *worker)
wait_for_completion(worker->exit_done);
}
-static void vhost_worker_free(struct vhost_dev *dev)
-{
- struct vhost_worker *worker = dev->worker;
+static void vhost_worker_put(struct vhost_worker *worker)
+{
if (!worker)
return;
- dev->worker = NULL;
+ if (!refcount_dec_and_test(&worker->refcount))
+ return;
+
WARN_ON(!llist_empty(&worker->work_list));
vhost_worker_stop(worker);
kfree(worker);
}
-static struct vhost_worker *vhost_worker_create(struct vhost_dev *dev)
+static void vhost_vq_clear_worker(struct vhost_virtqueue *vq)
+{
+ if (vq->worker)
+ vhost_worker_put(vq->worker);
+ vq->worker = NULL;
+}
+
+static void vhost_workers_free(struct vhost_dev *dev)
+{
+ int i;
+
+ if (!dev->use_worker)
+ return;
+
+ for (i = 0; i < dev->nvqs; i++)
+ vhost_vq_clear_worker(dev->vqs[i]);
+}
+
+static struct vhost_worker *vhost_worker_create(struct vhost_dev *dev,
+ int init_vq_map_count)
{
struct vhost_worker *worker;
struct task_struct *task;
@@ -598,9 +617,9 @@ static struct vhost_worker *vhost_worker_create(struct
vhost_dev *dev)
if (!worker)
return NULL;
- dev->worker = worker;
worker->kcov_handle = kcov_common_handle();
init_llist_head(&worker->work_list);
+ refcount_set(&worker->refcount, init_vq_map_count);
/*
* vhost used to use the kthread API which ignores all signals by
@@ -617,10 +636,58 @@ static struct vhost_worker *vhost_worker_create(struct
vhost_dev *dev)
free_worker:
kfree(worker);
- dev->worker = NULL;
return NULL;
}
+static struct vhost_worker *vhost_worker_find(struct vhost_dev *dev, pid_t pid)
+{
+ struct vhost_worker *worker = NULL;
+ int i;
+
+ for (i = 0; i < dev->nvqs; i++) {
+ if (dev->vqs[i]->worker->task->pid != pid)
+ continue;
+
+ worker = dev->vqs[i]->worker;
+ break;
+ }
+
+ return worker;
+}
+
+/* Caller must have device mutex */
+static int vhost_vq_setup_worker(struct vhost_virtqueue *vq,
+ struct vhost_vring_worker *info)
+{
+ struct vhost_dev *dev = vq->dev;
+ struct vhost_worker *worker;
+
+ if (!dev->use_worker)
+ return -EINVAL;
+
+ /* We don't support setting a worker on an active vq */
+ if (vq->private_data)
+ return -EBUSY;
+
+ if (info->pid == VHOST_VRING_NEW_WORKER) {
+ worker = vhost_worker_create(dev, 1);
+ if (!worker)
+ return -ENOMEM;
+
+ info->pid = worker->task->pid;
+ } else {
+ worker = vhost_worker_find(dev, info->pid);
+ if (!worker)
+ return -ENODEV;
+
+ refcount_inc(&worker->refcount);
+ }
+
+ vhost_vq_clear_worker(vq);
+ vq->worker = worker;
+ return 0;
+}
+
/* Caller should have device mutex */
long vhost_dev_set_owner(struct vhost_dev *dev)
{
@@ -636,7 +703,7 @@ long vhost_dev_set_owner(struct vhost_dev *dev)
vhost_attach_mm(dev);
if (dev->use_worker) {
- worker = vhost_worker_create(dev);
+ worker = vhost_worker_create(dev, dev->nvqs);
if (!worker)
goto err_worker;
@@ -650,7 +717,7 @@ long vhost_dev_set_owner(struct vhost_dev *dev)
return 0;
err_iovecs:
- vhost_worker_free(dev);
+ vhost_workers_free(dev);
err_worker:
vhost_detach_mm(dev);
err_mm:
@@ -742,7 +809,7 @@ void vhost_dev_cleanup(struct vhost_dev *dev)
dev->iotlb = NULL;
vhost_clear_msg(dev);
wake_up_interruptible_poll(&dev->wait, EPOLLIN | EPOLLRDNORM);
- vhost_worker_free(dev);
+ vhost_workers_free(dev);
vhost_detach_mm(dev);
}
EXPORT_SYMBOL_GPL(vhost_dev_cleanup);
@@ -1612,6 +1679,7 @@ long vhost_vring_ioctl(struct vhost_dev *d, unsigned int
ioctl, void __user *arg
struct eventfd_ctx *ctx = NULL;
u32 __user *idxp = argp;
struct vhost_virtqueue *vq;
+ struct vhost_vring_worker w;
struct vhost_vring_state s;
struct vhost_vring_file f;
u32 idx;
@@ -1719,6 +1787,15 @@ long vhost_vring_ioctl(struct vhost_dev *d, unsigned int
ioctl, void __user *arg
if (copy_to_user(argp, &s, sizeof(s)))
r = -EFAULT;
break;
+ case VHOST_SET_VRING_WORKER:
+ if (copy_from_user(&w, argp, sizeof(w))) {
+ r = -EFAULT;
+ break;
+ }
+ r = vhost_vq_setup_worker(vq, &w);
+ if (!r && copy_to_user(argp, &w, sizeof(w)))
+ r = -EFAULT;
+ break;
default:
r = -ENOIOCTLCMD;
}
diff --git a/drivers/vhost/vhost.h b/drivers/vhost/vhost.h
index 33c63b24187a..0911d1a9bd3b 100644
--- a/drivers/vhost/vhost.h
+++ b/drivers/vhost/vhost.h
@@ -35,6 +35,7 @@ struct vhost_worker {
struct llist_head work_list;
u64 kcov_handle;
unsigned long flags;
+ refcount_t refcount;
};
/* Poll a file (eventfd or socket) */
@@ -160,7 +161,6 @@ struct vhost_dev {
struct vhost_virtqueue **vqs;
int nvqs;
struct eventfd_ctx *log_ctx;
- struct vhost_worker *worker;
struct vhost_iotlb *umem;
struct vhost_iotlb *iotlb;
spinlock_t iotlb_lock;
diff --git a/include/uapi/linux/vhost.h b/include/uapi/linux/vhost.h
index c998860d7bbc..e5c0669430e5 100644
--- a/include/uapi/linux/vhost.h
+++ b/include/uapi/linux/vhost.h
@@ -70,6 +70,17 @@
#define VHOST_VRING_BIG_ENDIAN 1
#define VHOST_SET_VRING_ENDIAN _IOW(VHOST_VIRTIO, 0x13, struct
vhost_vring_state)
#define VHOST_GET_VRING_ENDIAN _IOW(VHOST_VIRTIO, 0x14, struct
vhost_vring_state)
+/* By default, a device gets one vhost_worker created during VHOST_SET_OWNER
+ * that its virtqueues share. This allows userspace to create a vhost_worker
+ * and map a virtqueue to it or map a virtqueue to an existing worker.
+ *
+ * If pid > 0 and it matches an existing vhost_worker thread it will be
bound
+ * to the vq. If pid is VHOST_VRING_NEW_WORKER, then a new worker will be
+ * created and bound to the vq.
+ *
+ * This must be called after VHOST_SET_OWNER and before the vq is active.
+ */
+#define VHOST_SET_VRING_WORKER _IOWR(VHOST_VIRTIO, 0x15, struct
vhost_vring_worker)
/* The following ioctls use eventfd file descriptors to signal and poll
* for events. */
diff --git a/include/uapi/linux/vhost_types.h b/include/uapi/linux/vhost_types.h
index f7f6a3a28977..af654e3cef0e 100644
--- a/include/uapi/linux/vhost_types.h
+++ b/include/uapi/linux/vhost_types.h
@@ -47,6 +47,18 @@ struct vhost_vring_addr {
__u64 log_guest_addr;
};
+#define VHOST_VRING_NEW_WORKER -1
+
+struct vhost_vring_worker {
+ unsigned int index;
+ /*
+ * The pid of the vhost worker that the vq will be bound to. If
+ * pid is VHOST_VRING_NEW_WORKER a new worker will be created and its
+ * pid will be returned in pid.
+ */
+ __kernel_pid_t pid;
+};
+
/* no alignment requirement */
struct vhost_iotlb_msg {
__u64 iova;
--
2.25.1
michael.christie at oracle.com
2021-Oct-22 06:02 UTC
[PATCH V3 00/11] vhost: multiple worker support
On 10/22/21 12:18 AM, Mike Christie wrote:> Results: > -------- > > fio jobs 1 2 4 8 12 16 > ---------------------------------------------------------- > 1 worker 84k 492k 510k - - -That should be 184k above.> worker per vq 184k 380k 744k 1422k 2256k 2434k
On Fri, Oct 22, 2021 at 12:18:59AM -0500, Mike Christie wrote:> The following patches apply over linus's tree and this patchset > > https://lore.kernel.org/all/20211007214448.6282-1-michael.christie at oracle.com/ > > which allows us to check the vhost owner thread's RLIMITs:Unfortunately that patchset in turn triggers kbuild warnings. I was hoping you would address them, I don't think merging that patchset before kbuild issues are addressed is possible. It also doesn't have lots of acks, I'm a bit apprehensive of merging core changes like this through the vhost tree. Try to CC more widely/ping people?> It looks like that patchset has been ok'd by all the major parties > and just needs a small cleanup to apply to Jens and Paul trees, so I > wanted to post my threading patches based over it for review. > > The following patches allow us to support multiple vhost workers per > device. I ended up just doing Stefan's original idea where userspace has > the kernel create a worker and we pass back the pid. This has the benefit > over the workqueue and userspace thread approach where we only have > one'ish code path in the kernel during setup to detect old tools. The > main IO paths and device/vq setup/teardown paths all use common code. > > I've also included a patch for qemu so you can get an idea of how it > works. If we are ok with the kernel code then I'll break that up into > a patchset and send to qemu-devel for review. > > Results: > -------- > > fio jobs 1 2 4 8 12 16 > ---------------------------------------------------------- > 1 worker 84k 492k 510k - - - > worker per vq 184k 380k 744k 1422k 2256k 2434k > > Notes: > 0. This used a simple fio command: > > fio --filename=/dev/sdb --direct=1 --rw=randrw --bs=4k \ > --ioengine=libaio --iodepth=128 --numjobs=$JOBS_ABOVE > > and I used a VM with 16 vCPUs and 16 virtqueues. > > 1. The patches were tested with emulate_pr=0 and these patches: > > https://lore.kernel.org/all/yq1tuhge4bg.fsf at ca-mkp.ca.oracle.com/t/ > > which are in mkp's scsi branches for the next kernel. They fix the perf > issues where IOPs dropped at 12 vqs/jobs. > > 2. Because we have a hard limit of 1024 cmds, if the num jobs * iodepth > was greater than 1024, I would decrease iodepth. So 12 jobs used 85 cmds, > and 16 used 64. > > 3. The perf issue above at 2 jobs is because when we only have 1 worker > we execute more cmds per vhost_work due to all vqs funneling to one worker. > This results in less context switches and better batching without having to > tweak any settings. I'm working on patches to add back batching during lio > completion and do polling on the submission side. > > We will still want the threading patches, because if we batch at the fio > level plus use the vhost theading patches, we can see a big boost like > below. So hopefully doing it at the kernel will allow apps to just work > without having to be smart like fio. > > fio using io_uring and batching with the iodepth_batch* settings: > > fio jobs 1 2 4 8 12 16 > ------------------------------------------------------------- > 1 worker 494k 520k - - - - > worker per vq 496k 878k 1542k 2436k 2304k 2590k > > V3: > - fully convert vhost code to use vq based APIs instead of leaving it > half per dev and half per vq. > - rebase against kernel worker API. > - Drop delayed worker creation. We always create the default worker at > VHOST_SET_OWNER time. Userspace can create and bind workers after that. > > v2: > - change loop that we take a refcount to the worker in > - replaced pid == -1 with define. > - fixed tabbing/spacing coding style issue > - use hash instead of list to lookup workers. > - I dropped the patch that added an ioctl cmd to get a vq's worker's > pid. I saw we might do a generic netlink interface instead. > > >