Am 01. Juli 2013 18:13:25 schrieb Matt Fleming <matt at console-pimps.org>:> > Does reverting to -pre4 make things work again? > > -- > Matt Fleming, Intel Open Source Technology CenterYes, with pre4 it work. But as I wrote the problem during searching for the configfile and hung from the program already exist. Gesendet mit AquaMail f?r Android http://www.aqua-mail.com
On Mon, 01 Jul, at 08:28:08PM, Michael Szerencsits wrote:> Am 01. Juli 2013 18:13:25 schrieb Matt Fleming <matt at console-pimps.org>: > > > >Does reverting to -pre4 make things work again? > > > >-- > >Matt Fleming, Intel Open Source Technology Center > > Yes, with pre4 it work. > But as I wrote the problem during searching for the configfile and > hung from the program already exist.Could you try out 6.01-pre6 and see if your machine actually gets to the point of config file failure (I still need to debug that)? -- Matt Fleming, Intel Open Source Technology Center
On Thu, 04 Jul, at 08:17:19AM, Michael Szerencsits wrote:> > > Could you try out 6.01-pre6 and see if your machine actually gets to > > the point of config file failure (I still need to debug that)? > > > Yes, 6.01-pre6 works. syslinux.efi and ldlinux.e64 was loaded > successfully, but when trying to load the config file it stuck. See > wireshark traceThanks Michael, sorry for the delay in getting back to you. The timeout mechanism should have kicked in, I wonder why that's not happening. Oh, I see. We don't timeout when receiving packets at all for EFI, which means we're totally susceptible to the slightest bit of packet loss. I constructed a testcase to simulate 50% packet loss and the changes in 6.02-pre5 mean we actually make forward progress now. Could you try 6.02-pre5? -- Matt Fleming, Intel Open Source Technology Center
On Mon, 15 Jul, at 01:23:49PM, Michael Szerencsits wrote:> Hi Matt, > > tested 6.02-pre5 but without success. > > It loads both files (syslinux.efi and ldlinux.e64) now it also load the config (pxelinux.cfg/default) but than nothing happen. > After around 5 minutes the system reboot with no messages on the screen. > > The system use a InsideH20 Bios, Bios Version R0140D6, ME Version 8.1.0.1248. Maybe this help > > New trace is attached. > > Regards > MichaelCould you send me your config file? -- Matt Fleming, Intel Open Source Technology Center
> Could you send me your config file? > > -- > Matt Fleming, Intel Open Source Technology Center >Hi Matt, here is the config: DEFAULT AutoInstall PROMPT 0 LABEL AutoInstall KERNEL http://server/vmlinuz APPEND initrd=http://server/initrd.img root=live:http://server/LiveOS/squashfs.img quiet lang=en keymap=de-latin1 systemd.unit=rescue.target system.unit=rescue.target system.unit=rescue.target Also tested with IP instead of hostname. This is the pxelinux.cfg/default which work successfully when boting via BIOS boot (pxelinux.0) Regards Michael