Looking at the FAQ for SysLinux there is an option for an initrd file (initrd=filename), this does not seem to work with pxelinux (or it is just that I am doing something wrong...). here is my config file: prompt 1 #serial 0 115200 label linux kernel vmlinuz-2.4.18-ssi #read-write #root=/dev/ram0 append init=/linuxrc console=tty0 console=ttyS0,115200 initrd initrd-2.4.18-ssi.img label local localboot 0 The FAQ says to use initrd=initrd-2.4.18.ssi.img when I use that line I get the following error message during the PXE boot: Missing parameter in config file. When I use the config file as stated above I get the following messages: Unknown keyword in config file. Missing parameter in config file. I will keep looking to see if I missed anything thanks Scott
Hinchley, Scott wrote:> Looking at the FAQ for SysLinux there is an option for an initrd file > (initrd=filename), this does not seem to work with pxelinux (or it is > just that I am doing something wrong...). > here is my config file: > > prompt 1 > #serial 0 115200 > > label linux > kernel vmlinuz-2.4.18-ssi > #read-write > #root=/dev/ram0 > append init=/linuxrc console=tty0 console=ttyS0,115200 > initrd initrd-2.4.18-ssi.img >This isn't LILO. Try: append init=/linuxrc console=tty0 console=ttyS0,115200 initrd=initrd-2.4.18-ssi.img *on one line*. -hpa