Displaying 20 results from an estimated 800 matches similar to: "10.0.0-rc1: dahdi doesn't see card"
2012 Nov 02
1
Unable to create channel of type 'DAHDI' (cause 17 - User busy)
Hi,
I have 6 Red FXO with TDM2400p in my PC. I have install asterisk and dahdi
driver.
Scenario is
jitsi-----> asterisk server-----> analog PBX ----> landline phone
I configured this scenario as follow
in chan_dahdi.conf file
; General options
[channels]
usecallerid=yes
hidecallerid=no
callwaiting=yes
threewaycalling=yes
transfer=yes
2009 Mar 10
3
configuring channels for dahdi
after installing asterisk 1.4.23.1 and dahdi-linux-2.1.0.4 and at CLI> module load chan_dahdi.so receive the following:
signalling must be specified before any channels are.
CLI> Warning [4663]: chan_dahdi.c:11627 process_dahdi: Ignoring signalling
Error[4663]: chan_dahdi.c:10946 build_channels: Unable to reconfigure channel '1'
Error[4663]:
2009 Aug 27
3
Digium Echo cancellation.
hi all,
any one know, about echo cancellation with digium card,
is it actually needed or it okay if we dont purchase because it increase
price which half of new card,
regards
Dhaval
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090827/8d6c680a/attachment.htm
2010 Mar 03
3
dahdi and oslec
Hi All,
I have followed below steps to enable echo cancellation.
# cd /usr/src
# wget http://kernel.org/pub/linux/kernel/v2.6/linux-2.6.28.tar.bz2
# tar xjf linux-2.6.28.tar.bz2
# tar zxvf dahdi-linux-2.1.0.4.tar.gz
# ln -s /usr/src/dahdi-linux-2.1.0.4 /usr/src/dahdi
# mkdir /usr/src/dahdi/drivers/staging
# cp -fR /usr/src/linux-2.6.28/drivers/staging/echo
/usr/src/dahdi/drivers/staging
# sed -i
2011 Aug 13
3
Echo problem in the analoge lines
Hi All;
To overcome the echo problem, what mainly I have to do in the configuration other than the following line in the system.conf under dahdi directory?
echocanceller=mg2,1-16
1) How can I know if the digium card supporting echo cancellator?
2) If I am getting a message in the consol that unable to enable the echo cancelator, then what does it means? The hardware is not supporting echo
2019 Jun 06
3
error compiling dahdi for recent kernels
On Thu, Jun 6, 2019 at 12:17 PM Malcolm Davenport <malcolmd at sangoma.com>
wrote:
> Howdy,
>
> There's a dahdi-linux-complete-3.1.0-rc1+3.1.0-rc1.tar.gz.
>
> Try that.
>
I noticed that was there, but I didn't try it originally because it's
obviously a beta version. However, I did download it and try it. It does
compile, but doesn't work correctly. For one
2011 Mar 23
1
dahdi restart warning
What is this error ? is this harmful ?
*CLI>*CLI> dahdi restart
[Mar 23 14:01:06] WARNING[4314]: chan_dahdi.c:17422 process_dahdi: Ignoring any changes to 'userbase' (on reload) at line 23.
[Mar 23 14:01:06] WARNING[4314]: chan_dahdi.c:17422 process_dahdi: Ignoring any changes to 'vmsecret' (on reload) at line 31.
[Mar 23 14:01:06] WARNING[4314]: chan_dahdi.c:17422
2012 Jun 03
1
Dahdi 2.6.1 with OSLEC support
In order solve my incoming caller ID problem, I upgrade the dahdi to
version 2.6.1 from version 2.4.x. After upgrade, I found the echo
cancellation doesn't working (I'm using Digium AEX800B PCI Express card). I
can hear my self talking on the phone. How to solve this? I think I need to
recompile dahdi 2.6.1 with OSLEC support? how?
[root at callcenter ~]# dahdi_cfg -vvv
DAHDI Tools
2019 Jun 06
2
error compiling dahdi for recent kernels
Seems like I post about this about once a year, when it's time to upgrade
Fedora.
I first got this error trying to compile a patched version of
dahdi-linux-2.11.1; I noticed that there is now a
dahdi-linux-complete-3.0.0+3.0.0, so I tried that one with the same result.
If I compile it while running kernel-4.16.8-300.fc28.x86_64, it compiles
fine, but when I try to compile it while
running
2009 Feb 24
2
Configuring chan_dahdi.conf for Sangoma A200/Remora FXO/FXS Analog AFT card
Hi I have been having a rough time getting a Sangoma A200/Remora FXO/
FXS Analog AFT card set up properly.
The main issue is that the card has four ports and as far as I can
tell Asterisk is only seeing two. On the two that it recognizes the
"Green" FXS ports are not green, they just are not lit. The "RED" FXO
ports are indeed red, but from what I have read your not
2009 Aug 25
2
Echo
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
</head>
<body bgcolor="#ffffff" text="#000000">
I recently upgraded my Asterisk system to Dahdi and now I have an echo
<br>
problem.
<br>
<br>
I am running Asterisk 1.4.25 with Dahdi Complete 2.2.0, on a Digium
<br>
TE121B PCI express
2018 Feb 15
2
Problem with DAHDI
Hi again!
I tried to attach two VoIP-phones to my new Asterisk 13.14.1 on a Banana PI
with Armbian/Debian 9.
First test was to call a test service that say the time. Works!
Second test was to record my voice and play it again. Works!
Third test was to call the other VoIP-phone. It does NOT work... :(
Then I noticed that, by starting, Asterisk says the following messages:
[Feb 15 18:42:54]
2009 Feb 25
4
TE121 on Asterisk
Hello, I just bought a TE121 T1/E1 card, and now trying to install it on a
1.4.23.1 asterisk with dahdi 2.1.0.4
Actually first everything went on well and i managed to see my card on dahdi.
Here's the output:
#asterisk# dahdi_hardware
pci:0000:04:08.0 wcte12xp+ d161:8000 Wildcard TE121
and this is the scan:
--------------------------
asterisk# dahdi_scan
[1]
active=yes
alarms=RED
2006 Mar 17
4
TDM 2400 With 24 FXO
Hi,
Have someone there tried the TDM 2400 with 24 FXO? Have had echo
problems? or any other problem ? Recommendations? Optional echo
cancellation modules are necessary?
TIA,
Fernando
2010 Sep 01
2
Freepbx + Asterisk problem - NEED HELP
Hello,
After installing on Ubuntu 10.04 using the tutorial on
http://hmontoliu.blogspot.com/2010/03/installing-asterisk-and-freepbx-on.html
I have a running instance of Asterisk.
PROBLEM: result of dahdi_cfg:
DAHDI Tools Version - 2.2.1
DAHDI Version: 2.2.1
Echo Canceller(s): MG2
Configuration
======================
Channel map:
Channel 01: FXS Kewlstart (Default) (Echo Canceler: mg2)
2009 Feb 12
2
OSLEC not being loaded on Ubuntu Intrepid
I wonder if anyone has any ideas on this.
I have recently migrated my server from a custom built Linux with
Asterisk, Zaptel and Oslec running fine, to Ubuntu Server 8.10.
I have Asterisk installed via synaptic at it works fine.
I have built and installed the zaptel package by doing the following
commands:
sudo m-a -t build zaptel
cd /usr/src
sudo dpkg -i zaptel-modules-{version}.deb
sudo
2009 Jan 22
1
oslec + dahdi
Hi list, I install dahdi-linux successfully with the module of oslec
for the echo, but when I specify it in the system.conf the echo
canceller oslec it shows me errors:
DAHDI_ATTACH_ECHOCAN failed on channel 4: Invalid argument (22)
I see that the echo cancellers is supported: mg2, kb1, sec2, and sec
because oslec is not supported?, but he has support to compile it with
dahdi_linux!
best
2007 Oct 24
5
OSLEC and zaptel-1.4.5.1
Hi all,
After reading great things about the OSLEC Echo Canceller
(http://www.rowetel.com/ucasterisk/oslec) and seeing the reactions of
people who have tried it on a recent Trixbox thread
(http://www.trixbox.org/forums/trixbox-forums/open-discussion/need-people-echo-problems),
it sounds like it is the "bees knees" for sorting out echo problems with
cards like the x100p.
Has anyone
2009 Apr 29
2
Something wrong with DAHDI signalling according to the CLI
I have Asterisk 1.4.24 en a Digium TDM410 with EC and with 3 FXO
modules.
When I plug one PSTN-line into a FXO-port I am able to receive calls on
this line and I can also make calls from an internal SIP-phone to the
external PSTN-network.
Still I am bothered about something that appears on the CLI when I do a
reload chan_dahdi.so :
asterisk*CLI> reload chan_dahdi.so
-- Reloading module
2009 Mar 09
4
DAHDI and B410P (BRI)
Hi all,
I am having trouble setting the signalling method for the B410P using
DAHDI. Asterisk complains that it has never heard of 'bri_cpe' or
'bri_net' - but it doesn't mind having 'pri_cpe' etc.
ERROR[4294]: chan_dahdi.c:11327 process_dahdi: Unknown signalling method
'bri_net'
Dahdi - dahdi-linux-complete-2.1.0.4+2.1.0.2
Asterisk - 1.4.23.1
Libpri - 1.4.9