similar to: any experience with cisco media gw with fax???

I see a lot of comments but no actual show runs. Can someone post a 7206 config. I am having a dickens of a time getting calls to pass. I currently have the following loaded. Cisco IOS Software, 7200 Software (C7200-IK9O3S-M), Version 12.3(8)T6, RELEASE SOFTWARE (fc2) Thanks !!! Jerry -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.344 /

We're having an issue with connecting a Cisco ITS installation to * such that DTMF tones are passed to *. DTMF tones aren't passed to voicemail or to any of the interfaces behind *. On the Cisco Side: dial-peer voice 8 voip destination-pattern 9999$ session protocol sipv2 session target ipv4:172.16.1.249 session transport udp dtmf-relay rtp-nte codec g711ulaw no vad We have also

Hi i test a new equipment on my backbone: a Cisco AS5300 with voice dsp ressource connected at a E1 Voice Link. I want that all call incoming on the cisco 5300 are sent to Asterisk and all Asterisk outgoing call are sent to Cisco AS5300. Actually, i configure the AS5300: isdn switch-type primary-net5 ! voice service voip sip ! voice class codec 400 codec preference 1 g711alaw codec

I have the following configuration and am obviously missing something small that is causing * not to work as expected. I have the following defined in sip.conf [ccme-in] type=peer host=10.0.9.1 context=devel_in disallow=all allow=alaw nat=no canreinvite=yes qualify=yes and [devel_in] is defined in extentions.conf However when I try to call via the dial peer I have configured on the cisco

Ok here is a question that has gotten me stumped. I have an Asterisk system up and running. I need to connect it via the Internet to a Sip Cisco system. This is what they have. I have there IP address's and login. X-lite is able to connect to them and make a call! So I have the name right! CISCO router model: 2621 VoIP module: NM-HDA-4FXS I have done Google lookup and at the Wiki about

Hello, We have been working with the ReceiveFax application for some weeks now in order to receive faxes in T.38 and it works fairly well, but there are some faxes that for some reason we are not able to receive correctly. The asterisk version we are using is 1.6.0.6 with spandsp-0.0.5pre4 and the asterisk machine is behind a CISCO mediaGW to be able to communicate with the PSTN. The SIP call

If you have a PRI terminated in a Cisco router talking SIP to * and would be willing to share your Cisco config, please respond. Also, I would be interested in knowing what version of IOS you are using. We are using an NM-HDV in a 3640. TIA Bruce Komito High Sierra Networks, Inc. www.servers-r-us.com (775) 236-5815

Hello, I'm trying to receive faxes with asterisk. My configuration is like this: PSTN fax -> ISDN -> Cisco router with VoIP module -> Asterisk When I try to send a fax from PSTN fax I got the standard fax signal, Asterisk starts rxfax application and then call ends and there is no tif anywhere. On the fax display there is still one message: Calling... Part of my extensions.conf:

List users, It's been a while since I've posted here, but I've been hard at work pushing toward our large scale Asterisk goal and keeping up with this list can be a full time job by itself (I have19,543 unread list messages!!). This Friday, September 16th 2005, my team will be at the MCI Development Lab in Richardson, Texas testing our setup. We have a three server system

Hello, I've got an ISDN PRI circuit terminating in a Cisco AS5350, which in turn is talking to an Asterisk server via SIP for call origination and termination. Seems simple enough, and it works for the most part, but: 1) Caller ID name data comes in on the PRI, but doesn't appear to get handed off to the Asterisk server via SIP, at least not in any format that Asterisk

Hello, I am trying to create a simple IVR for testing.. What i did is to create a voice file from asterisk-gui. And i saw it created that under /var/lib/asterisk/sounds/record/ as deneme.gsm Then i tried to make a IVR menu and play that file. I tried exten=s,4,Playback(/record/deneme.gsm) exten=s,4,Playback(record/deneme.gsm) exten=s,4,Playback(deneme.gsm)

I'm stuck running a old copy of asterisk because something strange is going on in later versions of the CVS.. When I call in from a PSTN into my cisco 2610XM gateway which then routes the call to my asterisk box via sip.. Asterisk can no longer process DTMF tones generated by the calling party. This affects DISA, prompts and menus.. Has anyone else had this problem?? and use.. I DO have

I would think I could do this but for some reason I am stymied. I have a PRI from RCN connected to a cisco 3640 (in my day "cisco" is all lower case :-)). My config looks something like this on the cisco... --------------------------------------------------------- voice-card 3 dsp services dspfarm ! ip cef ! isdn switch-type primary-5ess ! controller T1 3/0 framing esf linecode

Hi i am search a sample config (for asterisk and for cisco) for connect a cisco 1760 with a FXO card to my asterisk. Thanks for your help Jerome

HI, I have been pulling my hair out trying to get a Cisco MC3810 to interface my Asterisk box with a T1. I am able to make outgoing calls but incoing calls never reach my Asterisk box. The cisco give a fast busy when I try to call one of the DID's. When playing around with the dial-peers I can get the cisco to pick up the call, but then it forwards the call back to the ANI that is dialing.

I wouldn't expect you to be using RFC3389 if your using A-law, can you include your IOS version and IOS config file ... I have not specified any allow's or disallow's in my * config for the codecs with my 5300, I also use Cisco 79xx phones and I use the option within the phones config file to select the preffered codec and when I change this to G.729/A-law/U-law all works perfectly

Hi, Previously i was using asterisk 1.4 with freepbx installation. To try the 1.6 version i installd anc configured everything.. Just one thing didnt work so far.. I am using grandstream 2000 and it has a line busy indicator for chef secretary phones. But now, this feature does not work. I can see the line is online..with a green steady light.. But when the line is busy or DND, it wont change to

What codec should be used to connect a * box to a cisco router which has a t1 with 24 trunks coming in? My router voip dial plan looks like this: dial-peer voice 2 voip destination-pattern [1,2,,3,5,8].. session protocol sipv2 session target ipv4:10.x.x.x dtmf-relay cisco-rtp codec g711ulaw no vad ! The problem I have is when more than one call is on it, sometimes the quality gets very

Hi, I am using asterisk 1.6.0.10 For debugging i set verbosity to 10 with asterisk -vvvvvvvvvvr.. now i am trying to set it lower but.. when i type asterisk -r it starts with Connected to Asterisk 1.6.0.10 currently running on asterisk1 (pid = 2408) Verbosity is at least 10 when i try set verobisty 1 or similar commands.. i think this command is obselete in 1.6 .. set verbose 1 No such command

I am starting to work on a similar solution, but with full call manager rather than CME. I am going to use Asterisk to accept POTS calls through PCI FXO ports (winmodems) and then forward the calls through to call manager via SIP. I don't have my FXO cards yet (waiting for UPS man!!) but I have * talking to the CM through SIP just fine. I am testing with the Cisco softphone, connected as a