asterisk users - Oct 2005 - Sample cisco config for cisco 7206

I see a lot of comments but no actual show runs.

Can someone post a 7206 config.

I am having a dickens of a time getting calls to pass.

I currently have the following loaded.

Cisco IOS Software, 7200 Software (C7200-IK9O3S-M), Version 12.3(8)T6,
RELEASE SOFTWARE (fc2)

 

Thanks !!!

 

Jerry

 

 


-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.344 / Virus Database: 267.11.14/130 - Release Date: 10/12/2005
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20051013/7e649e41/attachment.htm

Hello,

I have to deploy an Asterisk PBX with this requirements:
- 1 or 2 ISDN lines in input/output
- 14 internal analog phones (yes, I know, analog ones...  ;(  )
- Billing interface for the operator (for usage of analog phones)

For the external interface I'm thinking about Beronet Quad Span ISDN/BRI
Card
TE/NT (BN4S0).
I'm in trouble about the internal interfaces: the first thought was about 
Digium card (4 x TDM400P with 2 x S100M modules each), but it's difficult to
find a MB with 5 PCI, and I'll have no chanches for future expansions.

Does anyone of you know a PCI card with 8 FXS port that SURELY works with 
Asterisk?
I'm ready to examine any other piece of hardware with 8 or more FXS ports, 
too...

By the way, for billing operations I'm going to check AstBill sofware; did 
anyone positively try it with asterisk in operational environment? 

Any hint will be greatly appreciated...  ;)

Thanks


						Jonathan

Jerry, here are the relevant parts of my 7206 config.  Some things have been
changed to protect the innocent. ;)
 
dspint DSPfarm1/0
 codec med 
!
isdn switch-type primary-ni
!
!
voice call send-alert
!
voice service pots 
 fax protocol pass-through g711ulaw
!
voice service voip 
 fax protocol pass-through g711ulaw
!
voice class codec 1
 codec preference 1 g711ulaw
 codec preference 2 g711alaw
!
controller T1 2/0
 framing esf
 linecode b8zs
 cablelength long 0db
 pri-group timeslots 1-12,24
!
interface Serial2/0:23
 no ip address
 no logging event link-status
 isdn switch-type primary-ni
 isdn incoming-voice voice
 isdn supp-service name calling
 isdn send-alerting
 isdn sending-complete
 isdn incoming progress validate
 no cdp enable
!
voice-port 2/0:23
!
!
dial-peer cor custom
!
!
!
dial-peer voice 1 voip
 service session
 destination-pattern .
 voice-class codec 1
 session protocol sipv2
 session target sip-server
 dtmf-relay rtp-nte
 no vad
!
dial-peer voice 7999 pots
 service session
 destination-pattern .......$
 port 2/0:23
!
dial-peer voice 51555560 voip
 huntstop
 service session
 destination-pattern 515555600[0-5,9]$
 voice-class codec 1
 session protocol sipv2
 session target ipv4:192.168.1.12
 dtmf-relay rtp-nte
 no vad
!
dial-peer voice 1800 pots
 service session
 destination-pattern 18[0,6-8]+.......$
 no digit-strip
 port 2/0:23
!
sip-ua 
 no remote-party-id
 retry invite 3
 retry response 3
 retry bye 3
 retry cancel 3
 timers trying 1000
 timers buffer-invite 5000
 sip-server ipv4:192.168.1.11
 
This router is currently running IOS 12.4, but the config was the same for
12.3T.  I hope this helps.
 
B. J.
 
 
 


________________________________

From: Jerry James [mailto:jjames@smartertek.net] 
Sent: Thursday, October 13, 2005 14:26
To: asterisk-users@lists.digium.com
Subject: [Asterisk-Users] Sample cisco config for cisco 7206



I see a lot of comments but no actual show runs.

Can someone post a 7206 config.

I am having a dickens of a time getting calls to pass.

I currently have the following loaded.

Cisco IOS Software, 7200 Software (C7200-IK9O3S-M), Version 12.3(8)T6,
RELEASE SOFTWARE (fc2)

 

Thanks !!!

 

Jerry

 

 


--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.344 / Virus Database: 267.11.14/130 - Release Date: 10/12/2005