similar to: LIMIT_PLAYAUDIO_CALLEE LIMIT_PLAYAUDIO_CALLER

Greetings, I have tried numerous ways to set the LIMIT_PLAYAUDIO_CALLER and LIMIT_PLAYAUDIO_CALLEE variables with no success. The default parameters never change. Has anyone had success changing the defaults? If so, how did you do it? Thanks, vcomp -------------- next part -------------- An HTML attachment was scrubbed... URL:

I just read: Certain options to the Dial() statement require that Asterisk is in the media path, and consequently Asterisk will not let go of it: /t/, ''T", "h", "H", "w", "W" or "L" (with multiple arguments). Probably there are more. I had in my memory that "r", "R", "m" would also prevent a

I'm having a problem with sound output to the console. My basic dial plan is as follows: exten => _1NXXNXXXXXX,1,Dial(IAX2/####@voxee/${EXTEN},30,A(beep)) exten => _1NXXNXXXXXX,2,Playtones(info) exten => _1NXXNXXXXXX,3,Hangup I get the following output in the console: ___*CLI> dial 1#######@voxee -- Executing Dial("ALSA/default",

Hi fellows.. I have 2 asterisk servers in which the following line exten => _09049.,111,SetVar(LIMIT_PLAYAUDIO_CALLER=YES) exten => _09049.,112,SetVar(LIMIT_WARNING_FILE=beep) exten => _09049.,113,Dial(${TYPE}${DESTINO}|30|L(30000:10000)) works OK on my Asterisk 1.2.9, it plays the beep 10 seconds before the end of the call. doesn't work on my Asterisk 1.2.13, it hungs 10

Hi everyone, I'm trying the new atxfer functionality. All seems to work fine at the beginning, but there is no audio between the party at the end of the transfer. Plus, after that, even normal calls won't work well (they can't hangup!). I'm using the Asterisk CVS from 2005-01-10 with Asterisk-OH323. Here is my dialplan: [default] exten => h,1,NoOp(bye) exten =>

Thanks, Henry. It is very helpful for me. I also deleted the DIAL option "r" in our dial out trunk which fixed the problem. Dial command option r: Generate a ringing tone for the calling party, passing no audio from the called channel(s) until one answers. Without this option, Asterisk will generate ring tones automatically where it is appropriate to do so; however, "r" will

While on conversation with another party, I dial the atxfer key sequence. Asterisk says "Transfer" then gives you a dial tone, while put the other party on hold music. I dial the transferee number and talk with the transferee, then I hang up and the other party must be connected with the transferee. But this doesn't work the transferee hears a beep. -- Playing 'beep'

Hello There, I would like to play a busy tone (ie BEEP BEEP BEEP) when the underline carrier sends back 486 Busy Here. Looking at Dial parameters ( http://www.voip-info.org/wiki/view/Asterisk+cmd+Dial), it mentioned something about the r parameter as not being very professional or something like that... Then there was: U(x): Executes, via gosub, routine x on the called channel. This is similar

OK here is a possible tricky one. I have a rocom door entry system which connects to an FXS port on my TDM400P card. When the door button is pressed it initiates an 's' extension which dials a number of SIP extensions. When a SIP phone is picked up the user can speak to the person at the door and press the 7 digit which sends at DTMF tone to the rocom unit opening the door. All this

Hi, I would like to use the new atxfer (native assisted transfer, see mantis item #3241) , but I've partially been able to make it work. I can receive a call and then having the caller hear MOH while talking with another extension (the one I want to transfer to), but then I can't make the caller and the trasferred talk hanging up or pressing any key combination I'm aware of. My

Hi All, I just experienced a weird issue and though I'd share. I have a pretty standard business PBX setup for a business customer, local extensions, Linksys phones, call comes in and rings local extension exten => 101,1,Dial(SIP/101,20,tr) the physical phone has call forward enabled to the users home, Time Warner residential line service. Intermittently all seems to work except when the

Hi I'm trying to get ExtenSpy to work but it wont, I'm dialling a number from my mobile which comes into our server and answering the number on a particular SIP extension which all works fine. I'm then dialling an exten from my own SIP extension which executes the ExtenSpy for the correct extension but I hear nothing. Here is the output in the CLI -- Executing

Hi All, I hate to post yet another "bloody hangup detection issue" on the list, but I have been pulling my hair out no end of late with a hangup detection issue on 1 system (have a few others out there with TDM400's and no issue but this one is causing a real headache) The scenario is - system with TDM04B, a call comes in on a analogue line, rings internally and then diverts to a

Hi, I'm trying to configure Asterisk and DISA. Asterisk is working, but I cannot have DISA dialing out. This is a snippet of my extensions.conf: [internal] exten => 1003,1,DISA(no-password|outgoing2) [outgoing2] exten => 1003,1,Playback(beep.gsm) exten => 1005,1,Playback(beep.gsm) My understanding is that if I dial the extension 1003, I should then be redirected to the context

Hi list, I enabled the transfer function in my dialplan, but I may configure it wrong because sometime when I call a SIP extension number from one FXS port, the SIP side will hear word "transfer", I hear nothing, after that, the call conversation is fine.I'v had this problem for a long time, could not get clue where I configure it wrong. here is my related config part: sip.conf:

I'm trying to get call parking to work, but I've run out of things to try. I can place a call between two internal extensions, then on one extension transfer the call to extension 700, and the call gets parked on 701 but I don't hear the extension number when I do the transfer. I can hangup and call 701 and get the call back. Here's what I see: (comments added on lines starting

I am running asterisk 1.4.26.1 and using ALSA not oss dahdi 2.2.0 and libpri-1.4.10 I am calling into console/dsp I hear the audio just fine then after the hangup I hear ringing on the console/dsp. Why would that be? I found this bug for OSS https://issues.asterisk.org/view.php?id=13686 Does the same thing exist in ALSA??? some traces below Jerry == Parsing

Hi, I'm wondering if someone can share their thoughts on how to implement a system that periodically checks active channels which have been up for more than X minutes and plays/injects a sound file. The idea is to simply warn users that they've been on the phone for quite a while and maybe they should consider hanging up. If the call stays up for more than Y minutes, it is dropped

Hi I have configured attended transfer in features.conf like this [general] parkext => 70 ; What ext. to dial to park parkpos => 00-99 ; What extensions to park calls on context => parkedcalls ; Which context parked calls are in parkingtime => 300 ; Number of seconds a call can be parked for

Hello; I am using vicidial which is using asterisk 1.8, mean while when the extension has voicemail, I always see the red light on the Polycom and hear the beep sound (toot toot) in period time. Also, I can see at the LCD an option to select it for accessing the voicemail ?but I am facing the following problems: 1) The red light and the beep: How I can let the Phone only have the red light