similar to: Asterisk and PBX internal numbers

Hi, i managed to connect to Ericsson MD110 with PRI at last. And made a successful call thru asterisk to ericsson. But when i try to call from ericsson to asterisk i got an error on asterisk side. And i couldnt figure out why. Here's my extensions.conf about incoming calls. [DID_span_1] include = DID_span_1_timeinterval_all,${timeinterval_all} DID_span_1_timeinterval_all] exten =

I was just wondering if someone has experiences to use Asterisk in an existing Ericsson MD110 environment. Particulary I'd like to know if it is possible to use the MD110's system phones directly connected to Asterisk. I'm not very familiar with it but would it be possible to use ADSI with these phones? Are they more like analog or more like digital phones or is the protocol even more

Hi, Perhaps there's something wrong in my config... I did some tests connecting Asterisk to an Ericsson MD110 PBX by setting up an h323 trunk. When dialling into asterisk I got some problems when the entire number is not in the setup message, i.e. I'm dialling digit by digit on the ericsson phone. Lets say I have 4001 in my extensions, and dial that from the Ericsson PBX, then the

Hi. Calling from Ericsson MD110 via H.323 trunk to an asterisk 1.4.4 I get the call established but no sound heard on either end. What is the best/correct way to try and see what codecs Asterisk is using on each end of the call as it passes through Asterisk? And is there any way to see that voice is in fact being passed through Asterisk during the call (some counters etc.)? Thank you

I have been asked by a potential customer whether we can connect an Asterisk box to an Ericsson MD110 that has an E1 port with ISDN-USR. They are unable or unwilling to upgrade their E1 port to QSIG. Has anyone here had experience of successfully making such a connection? I have found a couple of hits on Google that suggest it "should" work, but I'm after something a little more

Hello all, I was wondering if someone already wrote something to support a serial connection(ICU) on PABX's that's used for signaling. What I currently have is a connection between an Ericsson MD110 and * with analog trunks. Problem with this is, that all CallerID info is send over a serial link (ICU). Is there anyone who knows if there is support for this on * or to find the

Hi guys! We have a call centre that has been moved across from an old Ericsson MD110 PABX to an Asterisk server with those in the call centre using X-Lite as their softphone. I'm trying to get Agent presence configured so that X-Lite gives the operators a visual indicator of their status - logged on, off and on "pause". I'm using chan_agent for the agents, so agents are

Hi! I need some help Well i have this cenario: 1 ip04 running asterisk [A] 1 pc running asterisk [B] I nedd to make calls from A to B, and B to A. Via sip The A-B calls are working. Now I need to configure the dial plan to call B-A either to sip numbers and Fxs. Anyone can help me? -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello all, as good? It would like to make a question, asterisk supports the protocol qsig, for interconnections in ISDN with equipment Siemens HiPath 4000 or same Ericsson MD110, so that it could identify to the name and the number of hosts and also to use some features of asterisk in the Siemens/Ericsson equipment. Greetings Josu? -------------- next part -------------- An HTML attachment was

Greetings folks; I have a bit of a conundrum, and I can't tell if Asterisk is doing something daft, or whether I'm clean missing out why it's doing what it's doing. So, I have a dialplan that looks a little like this: -------------------- [start] include => dids include => everythingelse [dids] ; Test exten => 8378,1,SetCallerID(3015551212) exten => 8378,2,Hangup

Hi. Anyhone have any experience with trunking between Ericsson MD110 and Asterisk using H.323? I've tried both ooh323 and the /channels/h323 one in version 1.4.4 and 1.4.0 of Asterisk. ooh323 does not manage to establish the call (starts to ring but then disconnection when answering the call on the Asterisk end) but using the channels/h323 driver I can get the call established from

Hello, for a long time i am using asterisk 1.6 with astgui. but for production system i intend to use asterisk 1.4 which i think might be more robust. And for a more developed service options i preferd to install with freepbx. But still there are big plusses and minusses for both system. My complain about astgui+1.6 was.. For example there were no backup trunk config running on that version.Even

Hello, I just tried to upgrade to 1.6.1.0 from 1.6.0.9 and i had problems in registering users. As i see from debug it successfully reads from users.conf but later,when a user tries to logon it say peer not found.... And there were an error msg about mysql about the username field..Smthing changed in mysql tables??? Now i downgraded to 1.6.0.9 again and everything is working..

Hello, I have a default installation of asterisk 1.6.1.9-2 When i create a user in users.conf via asterisk-gui, calls, voicemail etc works. But if i create a user realtime (and my realtime caching is available too) i can see the realtime user with sip show peers. But, my local dial rules does not work. I can call from realtime user to static users(the ones in users.conf) and if they are not

Hi All, I have installed chan_unicall and MFC/R2 successfully, and is runnign fine. But I noticed that once unicall is installed, asterisk CPU usage as reported by 'top', jumps to 99% every few seconds. I have no incoming calls, and I have even removed the E1 lines from card and I tried almost everything possible but I was not successful in determining the cause of this high cpu

Hi there, I am trying to setup a configuration that requires me to use SIP and asterisk behind a firewall and over a VPN to a remote office and with some local Phones also. I can't use IAX to my provider because they don't offer it and my handsets ( snom 300 ) also don't support IAX so it's all SIP. The configuration is a follows Asterisk PBX 10.202.17.217/24 ------>|

Hello, As i check the call logs, some of my clients seem to make successful calls but, in logfiles, Source field seems empty..Still I can see who is the source from Channel tab as SIP/XXXX, and the called number and the time etc but.. nothing on Source and the Called ID tab. Just some clients has this problem. But as i check nothing special in their settings. What might cause this problem. Using

Hi people, I've got Asterisk running nicely with two 7960s and hooked into our MD110 via a cisco AS5300. All is wonderful with the world...except, what is the deal with features like group pickup and so on... I have no idea what codes are available, what they do, etc...is there either a standard * is conforming to, or some doco of what features are available? (heh, yeah

Hi all I have a rather odd problem that I hope somebody can shed some light on. I have a Asterisk server (1.0.7) that is connected to a Cisco 2600 router (c2600-is-mz.122-28a) fitted with an E1 card. The E1 is configured for QSig and is conencted to our local Ericsson MD110 which goes out to the PSTN. We have a DID range assigned to the E1 and can make and receive calls from/to SIP attached

Maybe its just me but I find this question a little confusing, the tone duration should have no impact on tone recognition and typically in my experience the duration of the tone is defined by how long the user holds down the button !? > -----Original Message----- > From: James Sizemore [mailto:james@deny.org] > Sent: 22 August 2003 17:33 > To: asterisk-users@lists.digium.com >