similar to: Asterisk and Panasonic TDA200

Hi, I hope someone can help me with this.... Asterisk 1.0.6 Zaptel 1.0.6 Libpri 1.0.6, 1 Digium E100P card installed Panasonic TDA200 firmware v2.0.6 E1 Card Firmware 1.0.2 System is located in Australia, so as technologies go, I believe it is twist on the euro standard for the E1 signalling. Here is the situation. The TDA E1 card is set in cross over mode and I am using a functional

Sorry someone screwing with permissions on my server bounced the 2 days worth of email after I posted this, any and all those lovely people who replied with suggestions from my post could you sent them again :-) James -----Original Message----- From: James Bean On Behalf Of Asterisk Mailing List Sent: Tuesday, 30 May 2006 12:54 PM To: 'Asterisk Users Mailing List - Non-Commercial

I have a client who has a Panasonic Hybrid system. They are taking in another company as a building tenant and the tenant will be on a new 12 station Asterisk system. This new asterisk system will have 4 FXO ports plus ITSP. The two systems will be separate except that they should tie together for the purposes of dialing extensions directly on the opposite phone system and for transferring

I have a few questions. Asterisk is a windows program why each time I try to find out how communicate with my Panasonic TDA 100 or with TDE 100 always read "use one card o use a box" why I can't use simply my network card, in the other side of Panasonic exist two types of cards one in TDA 100 with 2 trunks and in the other side TDE have internal Two trunks too. Why if I want to

Panasonic PBX KX-TDA600 it doesn't support SIP protocol for VoIP technology it only support H323 Trunk through 4 or 16 channels gateway card and TDM technology with ISDN BRI and PRI card. Mc GRATH Ricardo

Anyone have any luck with connecting Asterisk to the Panasonic KX-TD500. I have Asterisk connected via crossover to the TE110P. We are able to make internal calls into the Asterisk Box but the PBX vendor (I know nothing about the KX-TD500) tells us it is not possible route DID over the trunk. I find this hard to believe. Anyone have any luck with this? Thanks! -------------- next part

Hi all, There is someone with some experience interconnecting a Panasonic digital PBX (KX-TD1232) with Asterisk? Thank you and best regards, Dan

Hi list! I have a little question about groups and Asterisk ... is there anyone out there that can say if Asterisk can do any of this; We have a customer that want call handling we cant give him with a traditional PBX, and I'm running Asterisk @home so I thought I could give it a try ... The customer wants that incoming call should go to one group with some phones in it, if the group is

I have a weird problem.... Asterisk 1.4 E100P connected to a Panasonic TDA phone system Here is what I get SIP Ext -> Panasonic Ext No Problems Panasonic Ext -> SIP Ext No Problems SIP Ext -> VOIP Provider No Problems Panasonic Ext -> VOIP Provider Errors ---------- Working SIP -> VOIP -- Executing [903........@from-sip:1] Dial("SIP/610-097aee60",

Hi I have a Panasonic TDA600 conected with one E1 to the pstn and one PRI with my Asterisk using a Digium TE220B card. The Panasonic is master clock and Asterisk is slave, additionally the Panasonic takes the clock from the PSTN E1. This scheme works and I?m able to make and receive calls the problem is that some times the Asterisk lose the synchronism with the Panasonic and the log shows this

Hi Guys, I'm looking for a light on the next problem integrating an Asterisk server with a Panasonic PBX using a PRI. The follow config has been working for two weeks and works almost fine, except for some little problems... 1- PSTN provides the E1/PRI (EuroISDN) 2- Asterisk receives the PRI 3- Asterisk provides a second PRI to Panasonic 4- Panasonic receives the asterisk PRI People can

Hi all, I have an existing panasonic analog pbx in use and a asterisk server with digium tdm400p(2 fxs and 2 fxo). channel 1 -> fxs -> telephone channel 2 -> fxs -> telephone channel 3 -> fxo -> extension 15 at panasonic pbx channel 4 -> fxo -> phone line from telco We call in to fxo (channel 4) and enter the ivr which prompt us to enter the extension number. After

Hi, Anybody have an idea how to integrate * with a Panasonic td-1232? We one at the main office, and are installing * in a branch office. We'd like to be able to make calls from * extensions to Panasonic extensions and the other way around. Making outgoing calls from extensions one one side to lines on the other would be nice too. I can put another * machine at the main office, but what is

Dear Pals One customer has a Panasonic PBX KX-T336 with 60 ext. and a E1 (R2) for Trunks working perfectly now, This customer has 10 wireless links to his branches, wireless working great now, no voice at the present MY IDEA : T1Card into the Panasonic (additional to the E1) connected to a T1 Digium Card into Asterisk as far as I know the T1 Card can be configured as E&M to act as

Hello! I have following connections over isdn pri: avaya definity---pri--asterisk--pri-panasonic 500 Just because panasonic 500 can't send user's names. I also want to have reverse callerid for avaya users. But if there is no answer in dial plan: exten => _XXXX,1,Set(CONNECTEDLINE(name)=${DB(names/${EXTEN})}) ;exten => _XXXX,n,Answer exten => _XXXX,n,Dial(DAHDI/g4/${EXTEN})

hi, anybody know how to make a sip trunk between trixbox and panasonic kx tde 100? i've tried, but always failed when calling from trixbox to panasonic. thanks,,, -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20130312/1dd5170b/attachment.htm>

If Someone did that, How I connect extensions.conf with this type of Hybrid system to work with asterisk inside this schema: PSTN--->PANASONIC KX <------> Asterisk | |--------->send internal call Thanks.

Hi, Is there anyone here who has experience connecting Asterisk (ver 13.8) with PBX Panasonic KX-TDA600 ? The architecture more less like this : Telco Sip Trunk ---> Asterisk 13 ---> Panasonic KX-TDA600 ---> Phone / Fax Thanks in advance, Regards, Ikka - Jakarta, Indonesia -------------- next part -------------- An HTML attachment was scrubbed... URL:

Dear Harry, Thx for the explanation. My team manage building's PBX that use Asterisk 13.x. We use Asterisk PBX for this buildings that have apartment and office customer. >From my Asterisk PBX, we connect to IPPhone (yealink) or ATA Converter (cisco SPA112). Others are using PBX like panasonic analog, audiocodes SBC, etc, and we use ATA Converter to convert from SIP to Analog (CO Line)

Im a 3-days-asterisk-newbie. In 3 weeks, I must have a PBX installed in a new office of ours: Panasonic or Asterisk. Asterisk would be, if I can emulate some Panasonic functions on Asterisk fast, to convince the executives. What I have done until now: Bought 1 Linksys pap2 (2 FXS), 1 Linksys SPA3102 (1 FXS + 1 FXO) for making asterisk tests. Configured Asterisk/Fedora 9 so I can make SIP->PSTN