similar to: Alcatel - Asterisk setup

Hi guys, I have an Alcatel 4200 with a ISDN board pluged in the asterisk server with TE110P. Input calls VOIP Proider ---> Asterisk ---> Alcatel Output Calls VOIP Proider <--- Asterisk <--- Alcatel In alcatel phones, users should dial 2 for take a line tone and can dial. At this point start my problems: 1. When users dial 2 on phone (alcatel) they don't received a dial tone,

Hi, Does anyone have any experience connecting asterisk to alcatel 4200 series pbx with bri cards? Does it should work with asterisk bri in NT mode, and alcatel bri with TE mode? Cheers, Igor Neves.

Hello, For a prospective customer, I need to evaluate the cost of an Alcatel OXE IP trunking licence price. The setup would be: PSTN -----<E1>---- Alcatel ----<SIP>----Asterisk ---------- SIP Phones At the moment, only a couple of simultaneous calls are needed between Alcatel PBX and Asterisk but later, this number will grow.

Hello, I have connected asterisk box with legacy PBX Alcatel OmniPCX 4400 (and also another * box connected to A4200). These PBXes have function to assign name to extensions and display it on phone. Asterisk box is connected via PRI with euroISDN signalling (also I have tried QSIG). Is it possible to set callerid with name and display it on alcatel digital phones? With command SetCALLERID

Hello, I have 2 analogue ports on an Alcatel PBX patched to 2 FXO ports on my <mailto:*@home> *@home 2.8 running on top of CentOS. Both FXO Ports are on ONE Digium card. What I would like is: If someone calls extn 281 on my Alcatel PBX it is routed through to Extn 233 on my * thruogh FXO port/module 4 If someone calls extn 282 on my Alcatel PBX it is routed through to Extn 234 on my *

Does anyone have any input into integrating asterisk with a alcatel 4400 PBX. Acording to what i've found is that Alcatel uses R2 for E1 -- regards Vikram (http://www.vicramresearch.com)

Hi guys, Recentlly i did a asterisk gateway and use it with an alcatel pabx. All is working, i have only two problems. 1. When call incomming to asterisk, it forward to digium card to PABX Alcatel. The user that start the call can't hear the control tone of ring ring ring. Tha calls stay without sound until the called part answer the call. At this point, conversation follow normaly. 2. When

Hello everybody I have an asterisk with an integration of alcatel pbx, by sip trunk, all calls are fine, but tha calls calls that originate from a analog line, the recipient is not listening, and that if they hear the call originates, the lines are E1 in alcatel pbx. When a asteris user call to analog line the call is ok. Everyone, has been that problem? I change asterisk version 1.4.21 to

Hello everybody, I just buy a X101p clone and i'm new in asterisk. Here is my configuration : ISDN line ---- Alcatel ----PSTN ext 68-----Asterisk with X101p clone ------sip phone ext 200 - 203 ||| ISDN phones ext 60-67 >From sip phone to ext 60-67 it works. 9+extnumber >From sip phone to Land lines it works. 9+0+phone number >From ext

Does anybody has experience with the SIP phone of Alcatel the ST280. I can't make a call with this phone. Everytime I make a call I get the error Jun 12 19:38:38 WARNING[1133718080]: chan_sip.c:497 retrans_pkt: Maximum retries exceeded on call 5624@81.124.191.47 for seqno 1 (Response)

Hello, Since upgrading from asterisk 11 to asterisk 13 (I have tested up to the latest 13.16.0 release), we have a problem with attended transfers to an alcatel pbx in which the call being transferred still has music on hold even after the transfer has completed. Is this a known issue? Any new flags that need setting, etc? Thanks Jason -------------- next part -------------- An HTML attachment

Hi, I'm sorry if this is already asked somewhere on the list but I couldn't find it. We have an old PBX system controlled by our Telecom provider. There are analog phones but also digital alcatel phone's connected to it. These are not ip based but legacy digital phone's. Is there a way how we can connect them to our own Asterisk PBX? The old PBX is going to be removed, so it has

Hi all, I'm new in the forum, and although I have some experience in Asterisk, I've never work with Asterisk FXO, FXS, E1... cards. I have several costumers with ATAs working with my SER. However one of them bought an Alcatel PBX OmniPCX Enterprise and now he wants I give him a E1 interface for interconection with its new PBX. I understand I need a E1-IP gateway which could be Asterisk

In the 'me too' vein, I also have an untested 3624 here on the shelf and am waiting on a shipment of T100 cards to play with. Documentation is very hard to come by. Alcatel are certainly the owners of the Mainstreet product line but, without a support contract, any documentation they may have is essentially unavailable as their per-incident fees for support cost more than most of the

Hi all! Is anyone using the $subject setup? What I would like to do the following setup: 1. OXE is setup for receiving calls, handling Agents 2. Asterisk as external IVR on extension 9xxx connected with ISDN (Q.931) PRI The incoming calling route: 1. OXE handles incoming calls, answer 2. Transfer to extension 9xxx 3. Asterisk answer (using one channel) 4. IVR is handling calls 5. If needed IVR

Hi, I followed the how-to from http://www.alcatelunleashed.com/viewtopic.php?f=44&t=840 All works fine except for Asterisk->Alcatel calls. Actually, calls from Asterisk to analog extensions on the Alcatel work. However, calls from Aserisk to digital extensions on the Alcatel 4400 do NOT work. I get this error in the Asterisk log: -- Executing Dial("SIP/4053-0823dd48",

I''m terribly new to Rails, so bear with me. I have an application I am working on which deals with projects and subcontractors. There can be several subs on each project and each sub can work on several projects. I have my join table set up and has_and_belongs_to_many in both models. If I manually put data in the join table, this works in my show view: <% for subcontractor in

Hi guys, I need to interconnect an asterisk server (1.4.17) with an alcatel pbx, because i want that an asterisk extension can call an alcatel extension and viceversa. I need to do this throug a NT port (of the digium card) for technical reasons (linked with alcatel hardware). Card installation was fine, but i'm not sure of the configuration i choose. In /etc/misdn-init.conf i put my

Greetings list, I've been asked by someone to help them set up a SIP link between an asterisk system and an Alcatel OmniPCX (v6 software). The asterisk bit's fine, but I know nothing about the Alcatel except that it does apparently allow the setup of SIP trunks. Does anyone have experience with the Alcatel unit? Any obvious pitfalls to watch out for? Any suggestions gratefully

Hello list. I'm going te explain my trouble. I have my asterisk with a TDM400P with 4 FXS channels. Two ports are connected to a Panasonic PBX (it's working fine), and others two ports are connected to an Alcatel 4200 PBX (but it doesn't anwer). I connected to a CO port (where i had a pstn line). When I call to the Alcatel PBX, the asterisk show me in it console that es ringing but