similar to: Problems with Eicon Diva V-4BRI - 2nd Port

Are there any step by step instrunctions on how to install drivers and I guess bristuff for this card? Just need to use it to handle voice on 2 BRI circuits (UK) then utilise with Asterisk and some Digium cards handling POTS phones (and some VoIP out the back). It's the EICON card stuff and how to make it all work I'm finding confusing? Steve -- NetTek Ltd UK mob +44-(0)7775 755503

Hi I've got a dell 2550 with an Eicon Diva server PRI card plugged into it. I can call out using the acopy2 test utility. I'm having trouble with asterisk making calls however... my capi.conf and modules.conf looks correct by the wiki instructions - does anyone have any advice on where to look ? I can attach conf files etc. if needed. Asterisk says it has 30 capi channels available,

Hey, If anyone supplies or knows where I can get either an Eicon Diva V-4BRI or a Junghanns QuadBRI card in Australia, please could you contact me offlist? Also, if anyone has any second-hand ones they need to get rid of, I'd be interested in making an offer! I've been checking eBay, but there don't seem to be any of these available at the moment. Thanks, Avi -- National Manager -

Hi! I'm always getting this error when echo cancellation should start. == ISDN3: Setting up echo canceller (PLCI=0x203, function=1, options=4, tail=64) == ISDN3: Setting up DTMF detector (PLCI=0x203, flag=1) -- ISDN3: Error setting up echo canceller (PLCI=0x203) Apr 3 10:49:30 WARNING[17266]: chan_capi.c:3334 show_capi_conf_error: ISDN3: conf_error 0x300b PLCI=0x203

Hi Guys Just wondering if you can help me and give me some pointers on what could be wrong in my setup. Everything seems to be installed. I have Asterisk 1.2.12.1 FreePBX 1.2.3 IAXModem 0.1.15 Chan_capi 0.7.0 The IAXmodem registers, faxgetty is starting in /var/log/messages but it just doesn't seem to pickup the call. In Chan_capi it says fax detected but no fax

Hey guys, Is anyone aware of a single PRI (E1) card that has onboard hardware echo cancellation? I can only seem to find 4-port cards (Digium and Sangoma) and I really don't need the other three ports. Thanks, Avi -- National Manager - Special Projects < Sydney / Melbourne / Canberra / Hobart / London /> 2/340 Gore Street T: +61 (0) 3 9486 0411 Fitzroy, VIC F:

I have used a channel bank to mux together BRI's and partial PRI's to a single PRI to avoid the goofyness of chan_capi. The focus of Asterisk support is geared to PRI's, it seems. -----Original Message----- From: Avi Miller [mailto:avi.miller@squiz.net] Sent: Thursday, June 15, 2006 7:50 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] what

Hi *, I want to integrate the Eicon Diva 4Bri Card to Asterisk. Eicon drivers and capi is installed. I use the latest dev version from eicon compiled and installed for my fedora 2 system. I found the chan_capi for asterisk from www.junghanns.net. Also loaded the patch and applied to the chan_capi source tree. I changed the Makefile to include the capi20.h from eicon:

Hi (Armin)! Does someone knows how to identify the type of the card? The delivery note says it is a V-4BRI-8M, whereas lspci reports a 4BRI-8M. What is it really? Are there any Eicon tools to identify the card type? thanks klaus 0000:0a:03.0 Network controller: Eicon Networks Corporation Diva Server 4BRI-8M Rev 2 (rev 01) Subsystem: Eicon Networks Corporation Diva Server 4BRI-8M Rev

Hi! I'm here again with echo canceller problem... :-( I think I've done everything to enable echo canceller feature, but it still doesn't work... Can anybody tell me if there is some error or something missing in this configuration please? I'm using Eicon Diva Server 4Bri. http://www.eicon.com/worldwide/products/MediaGateways/disv4bri.htm?techspec=1&regID=4999 Card

I am intending to rebuild our asterisk server on a Dell 2800 with Dual CPUs. I am currently using Centos release 3.5 (Final) with the 2.4.21-32.0.1.ELsmp Kernel on a Dell 1750. I have a TE410P (Quad PRI) card and a TDM card. I remember that there were issues with the 2.6 Kernel, but Iam sure that it was with the older asterisk builds. Also, the new server has the X64 intel CPUs, so I would like

Currently we have problems with our asterisk server connect with an Eicon Diva 4BRI Card to a PBX. Asterisk is running in version 1.0.0 on RedHat Enterprise Linux 3AS with kernel 2.4.21-4.EL. The Diva server is running in version 7.5 Can someone help us in reolving the errors with incoming calls? When we try to call to an extension we get these messages in the CLI: -- creating pipe for

Good day! so I've inherited an Asterisk PBX setup and it's busting my ass. Since the setup wasn't document and is not running on our standard operating environment I have to say it is an ad-hoc / experiment which has become critical infrastructure for the company and is now considered a risk. Because of this there is a need to rebuild and (this time) properly document the

Hi! I have some (short) question about the Eicon DIVA (V-)4BRI cards I want to have (short) answered before buying the DIVA card. I know there are several Eicon guys active on the list, thus I ask on the list instead of directly to Eicon so that all other will benefit as well. 1. Do Eicon DIVA (V-)4BRI cards support TE and NT mode? 2. Can the clock (master/slave) be configured independent

Hi gang, I know this is off-topic for Asterisk, but I don't know where else to ask: I've setup a central directory.xml file for my Polycom IP501 phones with a list of all the internal extensions. None of them have <sd>1</sd> as I don't want to enable any speed dials, just have a list in each phone. However, when a phone boots, it seems to pick a random entry and put it

I have read most of Eicons information on Q.SIG, and I am able to load the Q.SIG protocol (instead of ETSI for example). No strange logging in divacrtl mlog. But how do I tell Asterisk to understand Q.SIG? My PBX is configured for QSIG, but I cannot see anything on my trace when trying to make a call via the S0(Q.SIG) Janne > -----Ursprungligt meddelande----- > Fr?n:

Hi Everybody, Has anybody tried the above (or indeed any other 4XBRI cards) successfully with Asterisk. As far as I can see the above mentioned card is an active ISDN card but supported by it's own I4L driver. This leads to interesting questions particularly regarding echo cancellations (which usually doesn't work on the cheap passive cards with one exception as far as I can see).

Hey gang, I'm hoping someone can help me out here. I've just noticed that on two of my five Asterisk boxes (CentOS 4.4, Asterisk 1.2.12.1), I'm getting the following translation cost for g729: asterisk*CLI> show translation Server 1: g729 - 26 25 25 25 25 24 26 - 53 36 Server 2: g729 - 66 65 65 65 65 64 69 -

Hi, just a quickie... We've bought one of these primarily for Hylafax use, but since this card can run in NT mode, I'd be curious to use one of the four ports on it to 'serve' our PBX as a trunk for tests and playing with Asterisk. My question is, "Is it likely that we can use 3 ports with Hylafax in normal ISDN client mode, and the remaining port in NT mode with

Hi All: I used FreePBX to configure Asterisk, and tables are create in MySQL by using FreePBX install script. I created two x-lite softphone accounts by using FreePBX, they are stored in table sip as friend. I followed wiki doc to edit the extconfig.conf file. I can not get those two softphone to talk since I got the error message from Xlite as: Call failed: 503 service Unavailable I noticed