Hi! I'm here again with echo canceller problem... :-( I think I've done everything to enable echo canceller feature, but it still doesn't work... Can anybody tell me if there is some error or something missing in this configuration please? I'm using Eicon Diva Server 4Bri. http://www.eicon.com/worldwide/products/MediaGateways/disv4bri.htm?techspec=1®ID=4999 Card features: * Supplementary Services o Number Identification services (CLIP, CLIR, COLP, COLR, KEY, MSN, DDI, SUB) o Call offering services (TP, CFU, CFB, CFNR) o Call completion services (CW, HOLD, ECT) o Charging services (AoC) o Three-party conference o Large Conference * VoIP Gateway support o Echo cancellation (G.168) 128ms (32ms for VoIP) <<<<< it seems to support echo cancellation o Real Time Protocol (RTP framing) o Dynamic Anti-Jitter Buffer o Comfort Noise Generation o Voice Activity Detection o Voice compression (GSM, G.726) ===== capi.conf ==== [general] nationalprefix=039 ;;internationalprefix=011 rxgain=1.0 txgain=2.0 ;rxgain=1.0 ;txgain=1.0 alaw=yes ; ;ulaw=yes ;set this, if you live in u-law world instead of a-law --beppe [ISDN3] ntmode=yes incomingmsn=* controller=3 group=1 ;softdtmf=on ;relaxdtmf=on ;accountcodecontext=isdn3in holdtype=local immediate=yes ;echosquelch=1 echocancel=yes ;echocancelold=yes echotail=64 bridge=yes callgroup=1 ;deflect=1234567 devices=2 ====== and this is a piece of what "asterisk -rvvvvvvvvv" says when someone calls ===== == ISDN3: Incoming call 'yyyyyyyyyyyyyy' -> 'xxxxxxxxx' -- Executing Set("CAPI/ISDN3/'xxxxxxxxx'-1", "LANGUAGE()=it") in new stack -- Executing GotoIfTime("CAPI/ISDN3/'xxxxxxxxx'-1", "09:00-13:00|mon-fri|*|*?coda_lib_uni|s|1") in new stack -- Executing GotoIfTime("CAPI/ISDN3/'xxxxxxxxx'-1", "15:00-18:00|mon-fri|*|*?coda_lib_uni|s|1") in new stack -- Goto (coda_lib_uni,s,1) -- Executing Set("CAPI/ISDN3/'xxxxxxxxx'-1", "LANGUAGE()=it") in new stack -- Executing SetVar("CAPI/ISDN3/'xxxxxxxxx'-1", "MONITOR_FILENAME=lib-uni-31032006-16:40:21-039564615724") in new stack -- Executing Playback("CAPI/ISDN3/'xxxxxxxxx'-1", "wsa_benvenuto_lib_uni") in new stack == ISDN3: Answering for 'xxxxxxxxx' -- Playing 'wsa_benvenuto_lib_uni' (language 'it') Mar 31 16:40:21 WARNING[30181]: file.c:1029 ast_waitstream: Unexpected control subclass '14' == ISDN3: Setting up echo canceller (PLCI=0x103, function=1, options=4, tail=64) == ISDN3: Setting up DTMF detector (PLCI=0x103, flag=1) -- ISDN3: Error setting up echo canceller (PLCI=0x103) Mar 31 16:40:21 WARNING[29878]: chan_capi.c:3334 show_capi_conf_error: ISDN3: conf_error 0x300b PLCI=0x103 Command=FACILITY_CONF,0x8497 > CAPI INFO 0x300b: Facility not supported ============================================
Giuseppe wrote:> Can anybody tell me if there is some error or something missing in this > configuration please?I have the same card in a few of my servers and the echo canceller works just fine. I'm not 100% sure, but something does jump out at me:> == ISDN3: Answering for 'xxxxxxxxx' > -- Playing 'wsa_benvenuto_lib_uni' (language 'it')This plays *before* the echo canceller starts. If you suppress this, does the echo can get a chance to setup successfully?> Mar 31 16:40:21 WARNING[30181]: file.c:1029 ast_waitstream: Unexpected > control subclass '14' > == ISDN3: Setting up echo canceller (PLCI=0x103, function=1, options=4, > tail=64) > == ISDN3: Setting up DTMF detector (PLCI=0x103, flag=1) > -- ISDN3: Error setting up echo canceller (PLCI=0x103) > Mar 31 16:40:21 WARNING[29878]: chan_capi.c:3334 show_capi_conf_error: > ISDN3: conf_error 0x300b PLCI=0x103 Command=FACILITY_CONF,0x8497 > > CAPI INFO 0x300b: Facility not supportedcYa, Avi -- National Manager - Special Projects < Melbourne / Sydney / Canberra / Hobart / London /> 2/340 Gore Street T: +61 (0) 3 9486 0411 Fitzroy, VIC F: +61 (0) 3 9486 0611 3065 W: http://www.squiz.net/ .....>> Open Source - Own it - Squiz.net ...../>
Franz Wu
2006-Apr-01 02:28 UTC
[Asterisk-Users] Dial cmd has delay for the last dialed number on FXO
Hi list The * server one TDM04B card and my dialplan: exten => 080.,1,Dial(Zap/g1/${EXTEN}) All four FXO ports has group=1 in zapata.conf After dialing 0800012345 from a FXS extension, with one DTMF detector tapped on the line, I found * dialed 0,8,0,0,0,1,2,3,4 in even interval, delay longer, and then the last 5. Sometimes this behavior causes PSTN to repsond with "the number you dialed is non-existing". Any help will be appreciated. Franz
Mojo with Horan & Company, LLC
2006-Apr-03 17:32 UTC
[Asterisk-Users] Dial cmd has delay for the last dialed number on FXO
Yes, I can confirm same situation with numbers dialed in the US. Just now confirmed it with seven-digit local numbers and 1 + ten-digit long distance numbers. The final digit going out the zap line is always delayed. I posted this question to the list a few months back and got no ideas. I detected this using the ZapBarge application. Moj My zapata.conf: [channels] context=incoming signalling=fxs_ks usecallerid=yes cidsignalling=bell cidstart=ring hidecallerid=no callwaiting=no usecallingpres=yes callwaitingcallerid=no threewaycalling=no transfer=no cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes echotraining=800 immediate=no callprogress=no callgroup=1 pickupgroup=1 rxgain=0 txgain=0 context=incoming channel => 4 group=1 rxgain=2.375 txgain=0.0 channel => 1 rxgain=2.385 txgain=0.0 channel => 2 rxgain=2.95 txgain=0.0 context=incomingdirected channel => 3 Franz Wu wrote:> Hi list > > The * server one TDM04B card and my dialplan: > > exten => 080.,1,Dial(Zap/g1/${EXTEN}) > > All four FXO ports has group=1 in zapata.conf > > After dialing 0800012345 from a FXS extension, with one DTMF detector tapped > on the line, I found * dialed 0,8,0,0,0,1,2,3,4 in even interval, delay > longer, and then the last 5. Sometimes this behavior causes PSTN to repsond > with "the number you dialed is non-existing". > > Any help will be appreciated. > > Franz > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >-- Mojo <mojo@horanappraisals.com> Office Manger, Horan & Company, LLC (907) 747-6666 x112