similar to: Cisco 7970 SIP - few questions

Hi! I did manage to load phone with SIP image : SIP70.8-0-3S, made SEP-MAC.cnf.xml, but phone never read the configuration from it. On the screen it's written "Unprovisioned", and phone is not trying to register with asterisk. Please help!! MihaelaMJ -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, Does anyone know how to define speeddials in XML for the 7970 sip firmware?. I've played with the SEP<mac>.cnf.xml file that was posted previously but can't find a way to do it. I can define them on the phone usually (seems a bit buggy) but if the phone reboots they get lost from the config. Does anyone know a way to do this? I'm guessing it could be within the

Hi, ? We are new to IP phone firmware upgradation (Sorry if it is a re-post of previous question(s)). ? Recently we have bought a cisco 7942G IP phone. It currently has SIP 42.9-0-2SR1S firmware loaded on it. We do not see any option to configure a SIP Proxy where we can provide SIP Server (Asterisk PC/Device)? IP address (with current firmware on it) to register it with Asterisk. ? Do we need to

Anyone have the 7970 xml config for sip yet? Aaron

I'm trying to connect a Cisco 7942 to my Asterisk box. I have a 7960 and 7912 currently connected and functioning. I'm trying to use the recommendations from here: http://www.voip-info.org/wiki/view/Asterisk+phone+cisco+79x1+xml+configuration+files+for+SIP I have created a "XMLDefault.cnf.xml" and it took the latest image but the phone states it's unprovisioned? Any

Hi Everyone, I am having some issues getting my 7961 working with Trixbox. I have loaded the SIP code (8-3-3SR2) fine but when the phone boots up it goes into an unprovisioned state. A status message shows up and says ?Error Verifying Config Info?. I have read quite a bit on this topic (getting 7961?s to work with Asterisk and TB) and only came across a few postings where other people

continuing discussions of 79xx issues. i've seen referenced and am experiencing difficulty getting a 7970 to work behind NAT to a public asterisk server. i am successful with 7960s. 1. SIP load is 70.8-3-3SR2S 2. config works fine if 7970 is connecting to an asterisk server a local LAN (same subnet) 3. when debugging it in a NAT'd environment I see the register and

Hi, I have been using Cisco 7960's with Asterisk for years. I am trying get a 7961 working and have a problem. In my configuration, not all of my line appearances register to the same Asterisk SIP server. I have an Asterisk server at home and another at work. My Line 1 button registers to the home server and my Line 2 button registers to the work server. This has worked for years

hi all If I try to register a cisco 7945 phone (firmware sip v 9.2) to a asterisk server 1.8.5 I set in the xml file SEPmac.cnf.xml <callManager> <processNodeName>IP_ADDRESS_ASTERISK</processNodeName> ... and in the line 1 settings <proxy>USECALLMANAGER</proxy> it works good . Now I need to use the phone with 2

Hi, I want asterisk to call a person on the phone for monitoring the refrigerator storing vaccines. I am clueless where to look. Can someone clue me in ? Thanks, balu raman -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20071017/923a7b49/attachment.htm

Is there a way to display the time of the 7960 running firmware 7.4? Im unable to find any information. Thanks, Ben Blakely -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060308/a7e575cc/attachment.htm

Hello list, does anyone know how to change the "interdigit timeout" when using Cisco IP Phone 7940/7960 with SIP-Firmware and Asterisk? it's default value is 15 sec. but i have nothing found to set this in tftp-config file etc. Thanks in advance, Roland

I'm looking for some feedback on the Snom 360 phone. After deploying six of them to an office, I'm not as enthusiastic about them as I was when I was testing one before the deployment. The firmware seems to be consistently buggy, some of its problems are intermittent which makes it frustrating to troubleshoot and the support from Snom is lackluster to say the least. I find myself favoring

Hello All, I've been trying to get BLF working with Asterisk 1.6-LatestBeta, and My Cisco 7970 (Latest SIP Firmware). Has anyone successfully completed this? I got the patch to merge in from http://www.voip-info.org/wiki/view/Asterisk+Presence+for+Cisco+79x1+Phones With a bit of hackery to that code, it successfully compiled chan_sip for me. So, With 1.6 we have TCP Enabled on Asterisk,

> On a related note, how do you get a Cisco 7940 to dial numbers with a > hash in them, instead of just using the hash as a dial key. For > example, I have *#21# to check diverts, but the phone will just dial > "*" as soon as you type the # after it. <DIALTEMPLATE> <TEMPLATE MATCH="#..." Timeout="5" User="Phone" /> <TEMPLATE

Just installed Asterisk 1.2 on a brand new clean machine running RedHat 9.0. I have a TDM400 card inside. When I boot, the card seems dead. When I do: modprobe wctdm modprobe Zaptel the lights come on and all seems fine, until I reboot that is... After a reboot I have to repeat the modprobe. I shouldn't have to do a modprobe every re-boot should I? How do you get the drivers to load

I run a SIP-only shop with a 23 channel PRI and single T100P. Here are my configs: /etc/zaptel.conf: span=1,0,0,esf,b8zs bchan=1-23 dchan=24 loadzone = us defaultzone=us /etc/asterisk/zapata.conf [channels] context=default switchtype=dms100 signalling=pri_cpe pridialplan=unknown rxwink=300 ; Atlas seems to use long (250ms) winks usecallerid=no hidecallerid=no callwaiting=no

Is there a way to make the Cisco 7960 SIP phone dial out automatically without having to press the dial button, once the numbers that you have entered match a specific pattern? This feature is present when the phone is working with a Cisco CallManager. For example, if all of my internal extensions begin with a '5' and are four digits long, if I dialed '5123' on the phone, the

I've dug through the documentation, and I must have just glanced over this, but how do I set this system up so it executes the call when 4 digits have been entered. Currently it seems to be operating on a timeout system. Cisco 7940's Right now if I press the digits 6000 the phone waits like 8 seconds before going forward. (If I press dial it is immediate). Anybody? -C

Hi, Any of you have any experience with SIP softphone dialler that capable of local recording? (recording to files in harddrive) So far I only know eyeBeam and Express talk. eyebeam fine but there are known error with recording. Express talk recording looks ok, but sometime it doesn't have incoming voice with *. Cheers Benni-