similar to: SIP: INFO before answer causes disconnect

Hi, I'm experiencing the same problem. We have 2 office locations and the Asterisk server is at one of them. At the other location, all SPA941 access the Asterisk server over an Internet link. All phones are set to "nat=yes" at the remote location. So my problem is that the MWI doesn't work at the remote location. The Sipsak messages are sent properly, but it's sent to the

Does anyone know how to set the distinctive ring on the Linksys SPA941? I want to be able to dial one extension and have the phone ring with a certain tone and then dial another and have the phone ring with a different tone. I have tried the following ------------------------------------------------------------------- exten => 802,1,SIPAddHeader(call_info=Classic-4) exten =>

Dear Group, I have just purchased two Linksys SPA941 and flashed these to the latest firmware. Everything works well except for the Hold button? Has anyone else experienced the same issue? What was the solution? Kind Regards Shad Mortazavi

Hi all, I'm new to this list, so forgive me if I'm not supposed to ask this: I currently own a Linksys SPA941 SIP phone with 5.1.8 firmware. Is there any way to use TLS with this phone<--->asterisk (v 1.6.0.9)? It is said that is supports TLS/SRTP but I don't see any of these options in the configuration file or the admin (advanced) SIP conf panel. Am I missing something? Thnx

I have an a bunch of SPA941 Linksys phones for users in and out of the office. When the phones are in the office (and on the same network as the asterisk server) the WMI goes on when it should and off when it should. But when the phone is on another network and natted it fails to do so. The light always stays off. Has anybody had a similar problem (and hopefully a resolve)?

Hi All, I seem to be having a problem with all my VSPs. When I am registering with them I don't seem to be passing my port number. This problem causes other users the inability to call my VoIP number with the VSP. My VSP showed me what they are seeing. I have changed my useragent to be: Linksys/SPA941-4.1.15 Linksys/SPA941-4.1.15 Contact sip:1234321234@aa.bb.cc.dd with no

Hi all, i know this question is not directly asterisk related - but i have no idea where else to ask. We do have around 50 pieces of LinkSys SPA941 - these phones do have a 2.5mm plug connection - and we do have many many headsets we used with normal PC's before (so 2x3.5mm plug connection). Does anyone here know where i can get an adapter 1x2.5mm -> 2x3.5mm ? Or can anyone here tell me

Hello, Yesterday night we have upgraded our Asterisk from 1.2.32 to 1.4.24.1 with lipbri 1.4.10, dahdi-linux-2.2.0-rc4 and dahdi-tools-2.2.0-rc2. Libpri and dahdi is only for dahdi dummy cause of the meetme function. After the upgrade we had the problem that some Linksys spa941 phone at one location could not dial out. incoming calls to the phones works without any problem, but outbound the

Hi all. The SPA941 and friends have pretty multicoloured LEDs, but there doesn't appear to be any support for SUBSCRIBE/NOTIFY as * as implemented for extension hinting. Has anyone managed to get the phone to support this? Thanks! -- David Zanetti <david.zanetti@catalyst.net.nz> Team Leader, Systems Administration Catalyst IT Limited +64-4-8032233 +64-21-402260 -------------- next

Appearently SPA941 is less than a SPA942 without two ports, poe and backlight. There is less features too, it doesn't support BLF. Is it possible to hack 942-software into 941, or is there another workaround? Leif -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20091112/0a6cbf82/attachment.htm

Hi I have a big problems on my Asterisk systems : I have one Asterisk Server with static IP (no nat) and 6 Linksys SPA941. All SPA are after a router with NAT: * SPA-1 and SPA-2 are on the same network, we have a pat 5060 => SPA-1 and 5061=> SPA-2 on the internet router * SPA-3, we have a pat 5062 => SPA-3 * SPA-4, we have a pat 5063 =>

Hello list, I got a couple of those "wouldn't it be great questions", as following: 1. Is it possible, with asterisk to hold a central phonebook directory of callers?, so that when this party calls a "textual" caller ID will be displayed on the phone display. 2. How can this be configured with Trixbox, I've looked at the configuration options - I assume it plays no

Hello Folks, I'm an Asterisk newbie, that being said I have managed to get an SPA941 working with 1.2.8. I've got some issues (like getting the voicemail button to work as it should, and making the message indicator light work) but overall I'm pretty happy. I'm now trying to get a PAP2-NA to work. I reset it, have admin access, updated the firmware, and have the same SIP settings

hi all, just wondering what's happening here: i have a pap2 and an spa941. everytime i call my spa from my pap2 i can see it being added dynamically on the regcontext: [Oct 7 11:59:08] -- Saved useragent "Linksys/SPA942-5.2.8" for peer 100100 [Oct 7 11:59:08] -- Added extension '100100' priority 1 to sipregcontext but from spa to pap2 i dont see it, i looked

Hello list, using Asterisk 1.4.30. I want to set the SIP-header Remote-Party-ID to display the name of the calling party on my phone in stead of the number. This is the dialplan : exten => 10,1,NoOp() exten => 10,n,SIPAddHeader(Remote-Party-ID: "eric" <sip:10 at 192.168.1.150>;party=called ) exten => 10,n,Dial(SIP/test2) This is what the CLI shows : /[Jul 12

Hi, I have Grandstream GXP-2000 connected to Asterisk, and Asterisk has trunk to VSP for PSTN calls. When ever I place local PSTN call, the landline doesn't hang up right away (40 sec), when I hang up the GXP-2000. The GXP-2000 seems to have problems making international calls as well. Where it hangs up soon as the other party picks up. I have used different IP phones, VSP's and etc.

I'm experiencing a problem with a Sipura SPA-941 not available for incoming calls after Asterisk & Freepbx upgrade. I can dial out with the phone gto any other internal or external ext. It is registered with the Asterisk server. When I dial the Sipura directly from any other extension, it goes directly to vm. I have other Sip softphones that are working fine. A sip debug when calling the

Hi for all I have one queue and one agent. That agent has a SPA941 with 3 lines configured to an asterisk. That agent logins into queue. If two clients call into that queue and the agent receive the two calls (one for any different line). It is possible that exist any configuration on asterisk to avoid that problem without limiting the number of lines on the agent phone? I'm using trixbox

I'm starting work on some provisioning tools to simplify plugging in and configuring hard SIP handsets and conference bridges (maybe eventually MPEG-4 PoE video cameras that speak SIP as well). Issue is that I'd like to glean as much information out of the configuration files... but don't want to write a whole new parser to do it (especially not one that understands templates and

Hi all, We have recently implemented an Asterisk system using Trixbox (asterisk v1.4.4 at the moment, yet to move to 1.4.9) but are getting pressure to switch back to our old key system unless we fix two major issues. So please help me avoid switching back! An overview: We have about 12 Linksys SPA941 SIP phones connected on a private switched network to our asterisk box which is a