asterisk users - Jun 2006 - Sipura SPA-941 not available after Asterisk & Freepbx upgrade

I'm experiencing a problem with a Sipura SPA-941 not available for incoming
calls after Asterisk & Freepbx upgrade. I can dial out with the phone gto
any other internal or external ext. It is registered with the Asterisk
server. When I dial the Sipura directly from any other extension, it goes
directly to vm. I have other Sip softphones that are working fine. A sip
debug when calling the Sipura indicates "Extension 200 is not available to
be called" then goes to vm. This configuration had been working fine for
over six months prior to  the upgrade.

asterisk1*CLI> sip show peer 200
asterisk1*CLI>

  * Name       : 200
  Secret       : <Set>
  MD5Secret    : <Not set>
  Context      : from-internal
  Subscr.Cont. : <Not set>
  Language     :
  AMA flags    : Unknown
  CallingPres  : Presentation Allowed, Not Screened
  Callgroup    :
  Pickupgroup  :
  Mailbox      : 200@device
  VM Extension : asterisk
  LastMsgsSent : 3
  Call limit   : 0
  Dynamic      : Yes
  Callerid     : "David" <200>
  Expire       : 12789
  Insecure     : no
  Nat          : No
  ACL          : No
  CanReinvite  : No
  PromiscRedir : No
  User=Phone   : No
  Trust RPID   : No
  Send RPID    : No
  DTMFmode     : rfc2833
  LastMsg      : 0
  ToHost       :
  Addr->IP     : 192.168.1.174 Port 5060
  Defaddr->IP  : 0.0.0.0 Port 5060
  Def. Username: 200
  SIP Options  : (none)
  Codecs       : 0xc (ulaw|alaw)
  Codec Order  : (ulaw,alaw)
  Status       : Unmonitored
  Useragent    : Sipura/SPA941-4.1.8
  Reg. Contact : sip:200@192.168.1.174:5060
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20060603/81f284e8/attachment.htm

I finally had to give up on extension 200. I tried deleting/recreating and
reloading sipura and asterisk but no luck. I had to go to a different
extension for the line 1. line 2 never acted up. The new ext works fine.

On 6/3/06, David K Parker <davparker@gmail.com>
wrote:
>
> I'm experiencing a problem with a Sipura SPA-941 not available for
> incoming calls after Asterisk & Freepbx upgrade. I can dial out with
the
> phone gto any other internal or external ext. It is registered with the
> Asterisk server. When I dial the Sipura directly from any other extension,
> it goes directly to vm. I have other Sip softphones that are working fine.
A
> sip debug when calling the Sipura indicates "Extension 200 is not
available
> to be called" then goes to vm. This configuration had been working
fine for
> over six months prior to  the upgrade.
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20060603/9a08a6d6/attachment.htm