similar to: TDM 2400 With 24 FXO

Hello All, I am trying to figure out which way to go for a quad port fxo solution with a good echo can on it. My options are the sangoma remora, a mediatrix fxo, or something similar. The issue is that I would need a good EC. This would be on about a 9000 foot loop, and the lines don't function well on a spa-3000 or zaptel tdm 4 port card. Anyone have experience that drives them in a

Skipped content of type multipart/alternative-------------- next part -------------- A non-text attachment was scrubbed... Name: smime.p7s Type: application/x-pkcs7-signature Size: 3115 bytes Desc: not available Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20060323/c0928576/smime.bin

Wow ! No reply... May be I must talk about X100P instead of X101P ? Is someone has yet encountered this kind of "no sound" problem when bridging two FXO lines like this (first as input, second as output) ? Any idea ? TIA. Best Regards, Francois BERGERET, France. ----- Original Message ----- From: "Francois BERGERET" <f6hqz-m@hamwlan.net> To: "Asterisk Users

I thought I read somewhere that you no longer have to do a special make command for the 2.6 kernel. Is this true, or should I still make linux26? I'm having problems getting anything zaptel to load properly. ---- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com -------------- next part -------------- An HTML attachment was scrubbed... URL:

I would like to hear from anyone good or bad as what their experience has been in recent times with STABILITY of current builds of Asterisk and drivers for TDM400P. The sort of configuration is: 6 incoming POTS lines. ie. 2 TDM400P cards. I am not concerned with: price points, or the advantages or disadvantages of using POTS vs ISDN technology, but simply RELIABILITY & stability of the

Hello all, I'm using Wildcard TE410P card. Here is a zaptel.cfg loadzone=se defaultzone=se span=1,1,0,ccs,hdb3,crc4 bchan=1-15 dchan=16 bchan=17-31 span=2,0,0,ccs,hdb3,crc4 bchan=32-46 dchan=47 bchan=48-62 span=3,0,0,ccs,hdb3,crc4 bchan=63-77 dchan=78 bchan=79-93 span=4,0,0,ccs,hdb3,crc4 bchan=94-108 dchan=109 bchan=110-124 # ztcfg -vvv Zaptel Configuration ====================== SPAN 1:

I am looking for completly wireless desktop phones. Until I realized we needed wireless i was going to use polycom soundpoint 501's. Any suggestions on a comparable wireless phone? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070328/88e22671/attachment.htm

I get the following errors when starting Asterisk. == Parsing '/etc/asterisk/zapata.conf': Found Feb 19 21:14:35 WARNING[10440]: chan_zap.c:920 zt_open: Unable to specify channel 1: No such device Feb 19 21:14:35 ERROR[10440]: chan_zap.c:6860 mkintf: Unable to open channel 1: No such device here = 0, tmp->channel = 1, channel = 1 Feb 19 21:14:35

I finally got Solaris to successfully make asterisk, using these instructions: http://sunfreeware.com/programlistsparc10.html#gcc33 Now though, when I issue the make install, I get this error: mkdir -p /var/opt/asterisk/spool/system mkdir -p /var/opt/asterisk/spool/tmp mkdir -p /var/opt/asterisk/spool/meetme install -m 755 asterisk /opt/asterisk/usr/sbin/ install: asterisk was not found

Hi, To solve echo problems, I'm considering 2 alternatives. 1> Sangoma A104d - I can't find support for asterisk 1.2.1 2> Desktop echo canceller - http://www.oriontelecom.com/echo_canceller/desktop/e1_ec_desktop.html - I want to know where to buy and price. Any suggestion is appreciated. Thanks. Jason. p.s. : asterisk cli command "reload" can change rx_gain and

Sorry if this is a daft question but when a PSTN call comes in on my X100P the console shows the following; NOTICE[1217602880]: File chan_zap.c, Line 4456 (ss_thread): Got event 2 (Ring/Answered)... NOTICE[1217602880]: File chan_zap.c, Line 4456 (ss_thread): Got event 2 (Ring/Answered)... NOTICE[1217602880]: File chan_zap.c, Line 4456 (ss_thread): Got event 2 (Ring/Answered)...

The maintenance (adding RAM) took a little longer than I planned: 1) Shutdown - 1 minute 2) Open Case - 30 seconds At this point, I emember that I can''t add RAM to this box without removing the Mother Board (hinge-mounted in case) - slap forehead. 3) Remove cables, PCI NIC & MB - 2 minutes 4) Add RAM - 1 Minute 5) Get the %$#@ MB back in the case and aligned -- 15 Minutes 6)

Hi, I have a box with Debian Sarge, Asterisk 1.2.1 (and zaptel 1.2.1) and a TDM2400P with echo canceller. I installed the card but no echo cancellation is being made...seems like the echo canceller module does not work, infact the software cancellation is working. My zapata.conf has echocancel = 128 and echocancelwhenbridged = yes but no echotraining parameter which gives a warning. I found

Hi list, I have this problem: when someone is making a call, with asterisk and a TDM2400P connected to 8 fxo lines, the sound is good, but if three, for people are calling at the same time the sound got worse and worse. Using other voip cards the sound is much better even with all user calling at the same time. What can be, the problem? Someone else has having the same

Hi Francois, I kwnow, but I have "DSP:on" also if i not have an hardware echocan module :/ and I always have "Echo Cancellation: 0 taps, currently OFF". This is my zapata.conf [channels] language = it usecallerid = yes callwaiting = yes usecallingpres = yes callwaitingcallerid = yes threewaycalling = yes cancallforward = yes callreturn = yes switchtype = euroisdn

Dear All, I am not sure if this is the right place to ask my question but I can't find a newsgroup or support for this app_RPT concept so I hope if some one in this community who have tried it out could help me out. I studied this application requirments and saw the hardware needed they describe a radio quad which uses RJ 45 but I can't see where the RJ goes in order to be able to

Ok, but is there a way to check if echo cancellation is active on a call in progress ? Thanks Giordano -----Messaggio originale----- Da: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] Per conto di Steve Davies Inviato: marted? 28 marzo 2006 16.43 A: Asterisk Users Mailing List - Non-Commercial Discussion Oggetto: Re: [Asterisk-Users] Echo cancellation

I''v finished the french translation of the QuickStart Guides named "Basic two-interface firewall" As i''v not found the email of Tom Eastep i post this news here. I''m translating now the "Standalone", and after i will do the "Three interface" If there is some french guys here, may be they can read to find some errors ?! :) cya -- VETSEL

<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> <html> <head> </head> <body bgcolor="#ffffff" text="#000000"> I recently upgraded my Asterisk system to Dahdi and now I have an echo <br> problem. <br> <br> I am running Asterisk 1.4.25 with Dahdi Complete 2.2.0, on a Digium <br> TE121B PCI express

Hello, I just bought a TE121 T1/E1 card, and now trying to install it on a 1.4.23.1 asterisk with dahdi 2.1.0.4 Actually first everything went on well and i managed to see my card on dahdi. Here's the output: #asterisk# dahdi_hardware pci:0000:04:08.0 wcte12xp+ d161:8000 Wildcard TE121 and this is the scan: -------------------------- asterisk# dahdi_scan [1] active=yes alarms=RED