similar to: Aastra 9112i or 9133i Ring Tones

I have a dilemma. I am trying to setup an asterisk setup for about 10 people, but with the ability to expand to 100s. We are looking into hardphones to use for our systems. Here are the requirments I am looking for: SIP Not POE Full duplex Speakerphone $100-$300 We would like to have the cordless and corded option if possible (at least for 3 of the 10 people). So here are the

Hi all, I'm looking for recommendations on ethernet switches for a new install. Ideally would want switches with at least 24 ports, ideally with a GE uplink, and that support PoE (power over ethernet) on every port. I've seen lots of switches, and lots of "power hubs", but the combination, which makes a lot of sense, seems rare. What is out there? Do the switches need to be

Hi all, To solve my need for dial in modems, I've hit upon an idea: buy a used T1 "analog" modem bank like a Lucent Portmaster that takes in a T1 and provides several 56K modems. This is overkill for a lightly used dial in service, but the prices of these boxes is so cheap (~$300) with ISPs going away from dial in service that it makes sense. This is how I imagine it would work:

Hi all, I like to have a dial in modem on my toll free number so that when I or my employees travel, they can always get in for net access to read email if no better method is available. Right now, my Panasonic KX-TD1232D PBX receives the call on a POTS line and routes it to an analog modem. The speeds achieved are around 24 kbps due to the digitization of the KX-TD1232D introducing

Hello, I ftp'ed the binary RPM for samba from us6.samba.org, and when I tried to verify it, rpm said that MD5 was NOT OK. Has anyone else reported this behavior? Thanks, Hiten Sonpal sonpal@ciholas.com Engineer, CIHOLAS Enterprises Voice: 812 476 2721 x 102 2626 Kotter Ave, Unit #D Fax: 812 476 2881 Evansville, IN 47715 http://www.ciholas.com

Hi all, While pondering my choices for local dial tone service via a bunch of POTS lines or a T1, I began to wonder if perhaps there is another way. Are there VoIP dialtone providers? That is, could I use only my internet connection for voice calls and not have a separate T1/POTS bank for that? I guess I am imagining a company that gateways between the PTSN and the internet backbone.

Hi all, This is a NEWBIE question, so all you experienced types that are tired of stupid questions can move on... I've pretty much given up trying to do my entire phone system over IP (including local service), so I have to select and provision my local CO lines. I need about 10-12 lines which can be POTS lines, of course. But, I thought, why not get something digital and expandable

Hi all, I would be most grateful if someone would review my plans for my new phone system and comment on areas of expected trouble and advice on what to do better. Instead of moving our Panasonic KX-TD1232/TVS200 system (ugh...) to our new location, we've decided to jump into IP telephony with *. But we are new to * (but not Linux), so we're trying to learn as much as we can before we

Okay, I am facing a move in two months to newly renovated space. I have to decide *this week* between: A) Pull LAN and phone cables, prepare to move and expand our "traditional" PBX (Panasonic KX-TD1232 and VPS200). or B) Pull only LAN cables, go VoIP, use Asterisk as PBX. It is *not* an option to purchase a VoIP system package from Cisco, 3com, etc. Installers are getting an

Hey - I know there's some other people out there that have the 9133i ... has anyone gotten the DTMF tones to work after the far side picks up? I didn't have any problems out of the box with my SPA-841 phones... the aastra has been nicer so far, but I can't seem to get it to dial the touch tones after an auto-answer device picks up on the far side... I googled, to no avail. -Karl

Hi, Does anyone have experience with Asterisk and the aastra 9112i or 9133i phones? I am looking at purchasing some, and was curious how quality, and stability was with them.

Hello, I have some Aastra 9112i's in production that almost function flawlessly. The problem I'm having is when a caller is put on hold they do not hear hold music. If they are on hold for too long (~ a minute?) they are hung up on. All other phones including Aastra 480i and Sipura/Linksys ATAs all seem to be working fine. Is this a quirk anyone else has experienced? Any

There is no release note, just a text file that says AASTRA TELECOM INC. February 2006 FC-000046-01-07.st - 9133i Generic SIP Firmware 1.3.1.1095 for customer release. ________________________________ From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Gareth Owen Sent: 15 February 2006 02:00 To: asterisk-users@lists.digium.com

I've been pulling out my hair all day on this one. If anyone can help, I'd really appreciate it. :-( I've got an Aastra 9133i (with the latest firmware version) and a Cisco 7960 sitting behind a NAT device on my LAN. The Asterisk server is hosted offsite and has a public IP address. I've set up port-forwarding on the firewall for both phones to tunnel the SIP messages initiated

Hello - I have just purchased an Aastra 9133i SIP phone for testing with Asterisk. Its a little flakey but overall is a far superior phone to the others in the $179 range. I have an issue regarding the message waiting indicator. The phone does not seem to respond to the "NOTIFY" command from Asterisk. Searching archives seems to indicate that this was previously an issue on the 480i

Hello - I have just purchased an Aastra 9133i SIP phone for testing with Asterisk. Its a little flakey but overall is a far superior phone to the others in the $179 range. I have an issue regarding the message waiting indicator. The phone does not seem to respond to the "NOTIFY" command from Asterisk. Searching archives seems to indicate that this was previously an issue on the

Hello. Just rx'd the sip - aastra 9133i. Haven't done sip before. My initial attempt at setup has failed. "No Service" Anyone want to contact me off-list or on irc ? Regards...Martin

Hi, I have several aastra 9133i phones, which are connected to an asterisk 1.2.6 system. I have setup MWI on the phones to point to the IP of the asterisk server, but although there is a message waiting new in the mailbox, the phone's light does not light. Any thoughts?

Ok, So I just installed some aastra 9133i phones. They work great. One small problem. When I do an 'all page' anyone who is on the phone gets their call placed on hold for the duration of the page! THIS IS NOT GOOD! How do I make the page only go to people who are not on the phone, and ignore people who are on the phone?

Aastra Telecom has released SIP v1.3.1 firmware for the Aastra range of IP phones (480i, 480iCT, 9112i and 9133i). The firmware and release notes (no updated admin and user guides yet) are available for download at: http://www.aastra.com/support/enterpriseip Contrary to what the version numbering would suggest, this is a significant update with many new features and bug fixes. See the release