similar to: Need help with hint and call group

I don't think that will fix my problem. The hints on the individual user extensions (101, 102, 103 and 104 below) are working just fine. sccp.conf example of 1 user: [devices] type = 7970 description = User1 tzoffset = -6 autologin = 101,401 speeddial = 102,User2,102@wct-internal speeddial = 103,User3,103@wct-internal speeddial = 104,User4,104@wct-internal device => SEP000F90CEF9D3

ive got asterisk running with chan_sccp and three cisco phones (2 7910's and 1 7960). lots of bugs. when i press the speed dial button on either 7910, asterisk dies. also, if i dial from the 7910 to 7910, everything works fine. i can dial from or to the 7960 once, and then one of the 10's and the 60 die and try to reregister. if i take the 7960 out of the mix and remove its

Hello @List, i'm using a Cisco 7970 / 7914 phone with Asterisk 1.4 & sccp part of my sccp.conf type = 7914 (Cisco 7970 with 7914 phone extension) autologin = 117 description = Test speeddial = 10,Test (10),10@mycompany my speeddial line is for internal call howto call a external number eg. +xx467584933 ?? i want to press a button and call directly out thank you greetings, Daniel

Hello I patche dmy 7970 with the current SIP image i have 2 lines on it via sip and 6 hint speeddials but it seems thats only a speeddial no infos about busy status or so comes to the speddial button. somebody can help me?

I have a new asterisk installation (1.4.2) that is working fine with SIP. Now I'm trying to add 2 cisco ip phones (7960) running SCCP (latest chan_sccp). I have the phones booted, and the tftp directory all setup, etc. But the phones do not quite work right. When I lift the handset I only get a dial-tone 1 out of 5 or so times I try, though hitting the speaker button works. I can dial

On Sat, May 28, 2005 at 01:51:56AM +0200, Stefan Gofferje arranged a set of bits into the following: > Hi folks, > > I'm trying the latest mayday chan_sccp and found it difficult to have > more than three speeddials. I have defined only one line but can't get > more than three SDs. On console, * says > > May 28 01:44:12 ERROR[26933]: sccp_actions.c:252 >

Hi, This is a message I already posted on the chan_sccp mailing list, but since this list has a lot of active members, I'm hoping someone might be able to help (And my problem is * related, so I guess it's ok if I post it here also ;) ). I'm trying to get SCCP ATA188s to run with Asterisk. The Asterisk box uses the latest Asterisk@Home image (Version 2.6). I have compiled and

I'm trying to setup a couple of Cisco 7960's in asterisk. I have asterisk working fine for sip clients, and can call the 7960's just fine, but I can't seem to dial out on them. As soon as I enter the first digit, the phone attempts to dial it without waiting for the rest. I've changed timeout settings, etc but can't seem to get it to work. Any ideas? Asterisk

Hi! I have two, not too related questions: - the probably simpler one: if anyone can help me out using a Cisco 7905G with chan_sccp? I did already managed to get it working with a SIP image, I'd just like to see it work with this one as well. It's probably something I screw up with the configuration, as the phone registers, only I don't get any lines with it, although I have it

I'm still having problems getting this to work. I cannot get anything to display on my 7914 other than blank lines. I have SIP/5920-5930 in [main] that I'd like to add to the 7914 and indicate hook status. The 7960 is registering okay as SCCP/5000. What exactly should my sccp.conf file look like? When I make changes to this, how do I enact them? Do I reload Asterisk and reboot the phone

Ok, so multiple people have said that hinting is possible with chan_sccp on the 7940/7960's and such, has anyone got this working? How do you go about getting this to work? I'd use the wiki, but it's link to the mailing list topic on that doesn't work anymore :( -- Aaron Daniel Computer Systems Technician Sam Houston State University amdtech@shsu.edu (936) 294-4198

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi Everybody, I am experiencing some troubles with my Bria iPhone Edition (v. 1.2.8 build 5312, on iOS 4.2.1 iPhone 3G) and Asterisk 1.8.3.2 + TLS/SRTP on LAN (without NAT). With 2 computer clients (Blink, one on Mac, one on Windows/Linux),9i can have a very fine secure conversation in both directions. When I want to do the same with my iPhone,

Hi list! I'm trying to configure the Kirk IP 600 wireless (DECT) system. The wireless phones are regular DECT phones, the Kirk IP 600 is doing the voip part by registering/gatewaying the phones to a callmanager server. The phones do not work and I think the problem is that they do not register at asterisk but I'm not sure because I don't understand a thing of the sccp/skinny

Hello, I have tried to install this phone for hours now and I can't get it working. Maybe someone can help me :) I have searched for more info from everywhere but there isn't much about 7910 :( >From the CLI I get this: NAME ADDRESS MAC Reg. State ================ =============== ================ ========== telefon --

I'm setting up a 7921 and now want to add a second line to the phone. In my SCCP.conf file I have: autologin = 235,299 However, on reloading SCCP the phone fails to login to the second line with this error: [Sep 12 12:46:49] WARNING[12224]: sccp_actions.c:185 sccp_handle_register: SEP001BD457F8B1: Failed to autolog into 299: Max available lines phone limit reached 299 Is there a

I'm having a wierd problem with a Cisco 7960 (sccp2) and asterisk (1.4.2) If the call that I'm trying to make goes through, everything works fine. But if there's any sort of error (like me messing around in my extensions.conf, etc). I can't get the connection to drop. ie: If I get the conjestion tone and hang up the phone, I can do a sccp show channels I can see that the

I've added lines like this: speeddial = 123,test speeddial = 260,Bob in the [device] section for my 7921, but the speed dials do NOT appear on the menu (click right from the main screen). Am I missing something obvious here? Thanks MD -------------- next part -------------- An HTML attachment was scrubbed... URL:

I get the following message when I dial 74#. Does anyone have any ideas on what might be going on? If I don't require numbers to be terminated with # everything works as expected, but you have to wait for the digit timeout, of course. MESSEGE: DEBUG[1150520624]: File pbx.c, Line 1683 (ast_pbx_run): Oooh, got something to jump out with ('#')! -- Invalid extension '#' in

Does anyone have the 7970 work with sccp? I have used the example configurations from the wiki. I can see that the phone is failing to retrieve the CTLSEP<MAC>.tlv file and then is able to retrieve the SEP<MAC>.cnf.xml file. The phone is hanging with the message "updating ctl". Thanks, John SEP<MAC>.cnf.xml: <device> <devicePool>

Hi all, Is there a "speed dial" type application in *? The NEC PBX we currently use has a feature which allows any phone to access a system-wide speed dail database simply by keying the speed-dial number and pressing the 'redial' key from any extension. Even using a vinella phone on an sli the user can dial 77+speedial# and access this directory. Does * have a similar