similar to: Problems starting Asterisk with TDM22B

I get the following errors when starting Asterisk. == Parsing '/etc/asterisk/zapata.conf': Found Feb 19 21:14:35 WARNING[10440]: chan_zap.c:920 zt_open: Unable to specify channel 1: No such device Feb 19 21:14:35 ERROR[10440]: chan_zap.c:6860 mkintf: Unable to open channel 1: No such device here = 0, tmp->channel = 1, channel = 1 Feb 19 21:14:35

Hi- I'm totally stumped configuring my TDM400P with one FXS and one FXO module. Before I got the FXO module, I used to have an X101P, and everything was working very well. Now * doesn't seem to recognize the FXO channel. I've searched the wiki and the list archives. Stock Debian 3.0 stable installation. Any advice? Thanks. -- David Here's my configuration: modprobe zaptel

Hi, I've just got a TE110P card and installed at Asterisk. I configured zapata.conf, according to www.digium.com/index.php?menu=configuration, but the following error is happening: ... ... ... [chan_phone.so] => (Linux Telephony API Support) == Parsing '/etc/asterisk/phone.conf': Found == Registered channel type 'Phone' (Standard Linux Telephony API Driver)

I'm having a problem defining my channels Here is my zapata.conf ----------------------------------------------------------------------------------------------------- ; Zapata telephony interface ; ; Configuration file [channels] ; rxwink=300 ; Atlas seems to use long (250ms) winks usecallerid=yes hidecallerid=no callwaiting=yes callwaitingcallerid=yes threewaycalling=yes

I installed TDM400P and X100P pci cards in a system running mandrake 10.1 official, kernel 2.6.8.1-12mdksmp. I can compile zaptel, libpri, asterisk and modprobe (zaptel, wcfxs, wcfxo) without errors. Except that running ztcfg and asterisk fails. [root@asterisk asterisk]# ztcfg Notice: Configuration file is /etc/zaptel.conf line 3: Unable to open master device '/dev/zap/ctl'

Hi all, DIAX 0.9.9g is available for download (including the updated help file and web page) from the following locations: http://www.laser.com/dante or http://www.geocities.com/tdanro What's new in 0.9.9g (from 0.9.9f): - during a call, accept DTMF tones as monitored events to trigger output commands - call timer on the phone display - Swedish language added - can run a command from the

Hello all, This is my first post to this mailing list. I've been following the development (not as a developer, but as an interested user) of Asterisk for over a year now. It's only in the last month that we've decided to give it a try (hey, might as well...everything else we use is open source). We ordered a TDM11B (1 FXS, and 1 FXO). The card and Asterisk install was uneventful.

I just received two TDM400P cards, but I'm having problems with them. The full info is at: http://pastebin.com/824079 Extra, I'm using : libpri-1.2.3 zaptel-1.2.10 On a x86 stable Gentoo box. Kernel: 2.6.17 gcc-4.1.1, glibc-2.4-r4 Is that an hardware problem? Should I try the other card? -- Gustavo Felisberto (HumpBack) Web: http://dev.gentoo.org/~humpback Blog:

Hi all, I kindly ask DIAX users to send me a feedback related to the stability of the new version (0.9.9f), comparing with the older versions (especially 0.9.8). I ask this because I have DIAX runing for one week now without any crash. It is used mainly to control some X10 devices through a regular phone. Thank you and best regards, Dan

I am getting quite frustrated today, so please bear with me. I just installed Fedora Core 4 (was running RedHat 9 with a working Asterisk) now my Fedora does not appear to be recognizing my X100P (clone) at all. Hardware browser just shows them as unknown device. driver: hisax So, of course, my zaptel drivers do not work and therefore my asterisk does not work. any help would be greatly

can somebody that has these hardwares(X101P and S400P) working on his asterisk system please assist.................. you can send the solution to austino@skannet.com..... the error message is what i have below. ---------- Forwarded message ---------- Date: Thu, 1 May 2003 21:01:21 +0100 (WAT) From: austino@skannet.com To: asterisk-user@lists.digium.com Subject: Error working with X101P and

Hi, I have two WCT100P cards installed on a suse 9.0 box. Installation for Zaptel complains of some unresolved dependencies. The zaptel and wct1xxp modules load without any errors. ztcfg give no problems. The problem is when I start asterisk I get the following error and asterisk shuts down

Hi every one . There are any out there that have a unicall deploy working without problem ? Can give me some tips or referenece about his config ? Regards

iaxComm is an Open Source softphone for the Asterisk PBX. iaxComm compiles and runs on Win32, Linux and Mac OS X (Panther) systems. Recent Changes: * Improved jitterbuffer code * Steve Underwood's Packet Loss Concealment Code Features Include: * iLBC support * GSM support * speex support * ulaw and alaw support * Blind Transfer. * Custom Ringtones per

Hi all, We need help with our SuSe9.2 asterisk box We have one QuadBRI and one TDM40B in an ASUS pundit R-2 barebone. We have downloaded the bristuff (0.2.0-RC7j) and installed it without problems. once we downloaded and compiled asterisk, zaptel and all other stuff, the module installation succed in this order: modprobe zaptel modprobe qozap modprobe wcfsx then the ztcfg output this: Zaptel

Hi all, i have installed two digium cards on my asterisk box a TDM04B & TDM22B. The channels are configured as show below: Channel map: Channel 01: FXO Kewlstart (Default) (Slaves: 01) Channel 02: FXO Kewlstart (Default) (Slaves: 02) Channel 03: FXS Kewlstart (Default) (Slaves: 03) Channel 04: FXS Kewlstart (Default) (Slaves: 04) Channel 05: FXS Kewlstart (Default) (Slaves: 05) Channel 06:

I've put a t100p in our * server and I'm having trouble configuring it. It is directly connected to an Adtran TA 750 channel bank with two FXO cards (8 analog incoming lines total). I'm able to insmod and modprobe both zaptel and wct1xxp with no trouble, but when I start * with /usb/sbin/asterisk -c I get the following output: [root@rosella root]# /usr/sbin/asterisk -c Asterisk

I am trying to reconfigure an asterisk box that was using an HFC-S card with bristuff but is now using 2 analog lines therefore I want to use the TDM02B to connect to two POTS lines. The TDM02B has 2 red modules. I have this in /etc/zaptel.conf loadzone=nl defaultzone=nl fxsks=1-2 I have /etc/asterisk/zapata.conf signalling=fxs_ks echocancel=yes echocancelwhenbridged=yes echotraining=400

Hello All, Please forgive the lack of understanding as of yet but I have been trying to follow the mailing list messages over the last few days and would like to know if someone could wither point me into the right direction or possibly give me a brief overview of the complete process. Basically, I see that the Asterisk PBX systems can run on linux and seems to offer the engine base that is

Installing DevkitLite hardware (Very similar to John Lange's post on Tue Oct 08 2002) I cannot get anything to work on the phone connected to the s100u. I dont know what to do. Can someone please help me? I used the sample configuration files from digium documentaion that was supposed to be "sane" defaults for the kit. Very similar to John Lange's post on Tue Oct 08 2002 Here