similar to: Sipura endpoints

Hi list, Well I really didn't want to see things get to this point, but Sherman at Sipura along with their President Jan F. leave me no other choice. SIPURA has been provided a letter from our attorney for Breach of Contract and damages. They have yet to respond. A quick background. 1. Sherman (SIPURA's Director of Marketing), stated that we would do a join press release for the Oct

Anyone have any luck RMAing a Sipura phone since the Cisco take over? Sipura only has support via email or fax to end users and I haven't gotten a response to either for over 2 months. Linksys Support will jump you through all their scripted hoops to resolve your problem (they hope if they speak with a thick enough accent and make repeat the same steps over and over again that you will just

We're looking at implementing Asterisk in our department in the near future, we're looking at anywhere from 15-25 extensions. The machine we were looking at running this on was a Quad Xeon 450mhz (2MB L2 Cache) w/ 1GB of ram. I've heard bad things about running Asterisk on SMP machines? Would we be running into any performance issues with this machine? Tim Jackson Network Engineer

Any ideas? I edited the Makefile as instructed, ty. Now compiling .... sccp_channel.c 279 lines sccp_channel.c: In function `sccp_channel_send_callinfo': sccp_channel.c:48: structure has no member named `callerid' sccp_channel.c:49: structure has no member named `callerid' sccp_channel.c:49: structure has no member named `callerid' sccp_channel.c:49: structure has no

Ok, we're trying to use Asterisk as a PBX in our office. Our original plan was to use a Cisco 7960 with a 7914 attached. Short story is, no one updated chan_sccp in a long time and the 7914 is questionable at best anyway from what I've heard. We couldn't ever get chan_sccp to compile, I went to an older version of Asterisk and that broke some of our SIP devices. We tried using a couple

Does anybody out there have any evidence that Sipura support is still in operation? rgds benjk -- Sunrise Telephone Systems, 9F Shibuya Daikyo Bldg., 1-13-5 Shibuya, Tokyo, Japan. NB: Spam filters in place. Messages unrelated to the * mailing lists may get trashed.

I heard Sipura had really awesome documentation on the SPA-2000 and SPA-3000, but you have to email them for it. When I did, they said I had to get it from a reseller. It's been a while since I bought my units, I don't even remember where or who they were bought from. Can somebody email me the documentation for these devices? I'm quite interested in knowing what every one of their 200+

All, I get this whenever trying to dial to a peer when the peer registered to another server. I'm basically trying to use realtime to check for the peer and dial it. Mar 24 09:16:47 VERBOSE[4527]: -- Executing Dial("SIP/brak-f69f", "IAX2/brak-test/107") in new stack Mar 24 09:16:47 DEBUG[4527]: MySQL RealTime: Retrieve SQL: SELECT * FROM sip_users WHERE name =

I'm experiencing a very unusual problem with a few of my sipuras. They keep over heating after minimal usage. I unplug them and let them sit for 15 minutes and it starts working fine. The other way around is that I put a fan on it or something to keep it cooling. Has anyone else experienced this or are they just defective units? Regards, Mohammed Salim EZZI Telecom, Inc.

Having problems getting realtime working, I'm trying to use odbc for all of this. I've got Fedora 3 and have been fighting with odbc for a day now. I think I got it working correctly, however I can't seem to get the realtime portion working. In asterisk 'odbc show' shows it connected, I see it on my (odbc) mysql server connected and all, it connects and just idles. So, without

Hello, How good is :SPA 841 form SIPURA. Thanks Varun

Has anyone got any information on bulk provisioning of Linksys SPA-941/94s? There is an overview in the admin guide but it refers to a different provisioning guide that I haven't found anywhere. Kerry Garrison Director of Technical Services Tech Data Pros - Orange County's Mobile IT Service Provider (949) 502-7819 x200 - <mailto:kerryg@techdatapros.com> kerryg@techdatapros.com

This question isn't entirely Asterisk related, but I'm hoping that someone here may have the knowledge to respond to me anyway. I'm using Asterisk with several Sipura SPA-2000 SIP devices as FXS adapters. I would like to have my SPA's automatically provisioned through http or tftp, but I can't find any information on how to do so. Sipura's tech-support has not been very

Hi there everyone! I've bought a Sipura SPA 3000, and succesfully connected it to my Mac, where I installed Asterisk 1.4.0. Both ports (FXO and FXS) are well configured). However, living in Brazil, I'd like to know if there are optimal settings to my PSTN that I should enter into the config of the device. I experience a little bit of echo on the FXO probably because I raised the gain of

Hi all, The problem is on the volume of the voice sent by the SPA-841. I think the echo cancel algorithm sets a limit to the microphone when detects sounds or noise from the earphone. This problem generates an oscillation on the voice volume sent by the phone and even turns it off completely for very little lapses of time making the communication very uncomfortable. I manage three different

I am trying to configure the FXO port on a Sipura-3000 for use with Asterisk. When I connect to the Sipura to dial out on the PSTN line connected to the Sipura's FXO port, it gives me the dialtone of the PSTN line and then I can hear the DTMF for the number I dialled beforehand. It does work but the customer perceives this delayed second DTMF feedback as "unprofessional" and the

Does anyone have a Sipura 3k running, and using the FXO? I've got things working right, but if I try to toss a *67 in the dialplan, it seems the sipura is throwing a 403 forbidden back. For example: exten => _91NXXNXXXXXX,3,Dial,SIP/sipura1pstn1/${EXTEN:1} works fine exten => _91NXXNXXXXXX,3,Dial,SIP/sipura1pstn1/*67${EXTEN:1} does not (even if I toss a couple Ws in) I can't

Hi All, I have a number of SPAX00X units (spa1001, 2002, etc) and about 30 odd PAP2-NA units all hooked up to Asterisk. As you can imagine, setting them up took a while, and changing settings on them also takes a while. In order to prepare for future deployments, I'd like to use XML provisioning (or any kind of remote provisioning). I figured since Sipura/Cisco won't release the utility

Does anyone have some decent Nagios scripts out there that do more than monitor the proc itself? Rather than reinvite the wheel, figured I'd ask. I already saw the one on the wiki. Matt

Hello, I am very new to asterisk and voip in general and so far have managed to get the FXO card and a few sip phones working fine. My question is where does the Sipura SPA 2000 come in the picture? Can it be used as an extension (i.e FXS) ? Or is it to be used as a line (i.e FXO)? Or it can be used as both? My understanding is that its just like another ATA186. Is that true? I guess what I