similar to: high pitched tone and message on answer

Changing from using floats to shorts did fix the high pitched tone problem. I'm having other problems but I'll look into it more first. SteveK wrote: > > On May 21, 2006, at 6:33 PM, Kevin Jenkins wrote: > >> When I just copy the microphone input buffer to the output buffer the >> sound plays OK. But if I encode and decode the buffer through Speex I >>

When I just copy the microphone input buffer to the output buffer the sound plays OK. But if I encode and decode the buffer through Speex I get a high pitched constant tone in the background. I actually do hear my voice speaking when I talk, but it's faint and much quieter than the tone. Here's what my data looks like: Input is the first 5 floats of each input buffer. Output is

Question: After about having the server running for about an hour, our callers occationally hear a high pitched beep that lasts the entire call. In some cases, the noise doesn't start until a minute or 2 into the call, while others last the entire call. In some of the more serious cases, calls are dropped after the noise has occurred as well. Another symptom has been really bad static on a

On May 21, 2006, at 6:33 PM, Kevin Jenkins wrote: > When I just copy the microphone input buffer to the output buffer > the sound plays OK. But if I encode and decode the buffer through > Speex I get a high pitched constant tone in the background. I > actually do hear my voice speaking when I talk, but it's faint and > much quieter than the tone. > > Here's

This is driving me nuts. Any help appreciated. I have a couple of annoying problems in my Asterisk box, and I'll be dipped if I can figure them out. The box in question is an Asterisk CVS-05/03/04 (1.0) checkout, using the Zaptel drivers of the same vintage from CVS. There are two X100P cards, and one TDM400P with a single FXS module. The machine is an Athlon 2400XP CPU, Debian

I am a little green when it comes to all this but I am trying to connect our PBX to an asterisk server using a TDM400 with 4 FXO modules. I am able to dial an extension on my PBX handset and I get a dialtone from the PBX. After 2 rings I then hear the asterisk server connect and I get a dialtone from asterisk. I am then able to dial an extension on another asterisk server. My question is: How do

please help!!! I am dialing into our asterisk server(TDM400p) from the psnt. I hear our voicemail message and I press the extention 1000. The Polycom ip phone in the office rings. I pickup but neither side can hear one another. What have I done wrong? thanks sip.conf: [general] context=local-access ; Default context for incoming calls bindport=5060

hi all, We have a TDM400 card with 4 wfo modules. now the modules load fine and when i start asterisk with on phone line connected it just starts spewing these messages: -- Starting simple switch on 'Zap/4-1' Jan 13 12:59:47 NOTICE[10831]: chan_zap.c:5367 ss_thread: Got event 2 (Ring/Answered)... Jan 13 12:59:47 NOTICE[10831]: chan_zap.c:5367 ss_thread: Got event 2 (Ring/Answered)...

Hi, I've got an x100P and I'm able to dial out and make phone calls with it ok but I just want to set it up to answer the phone and be a simple answering machine but it doesn't seem to want to answer the phone. I keep getting this: on the console when the phone rings: -- Starting simple switch on 'Zap/1-1' Nov 28 08:55:09 NOTICE[29298]: chan_zap.c:5458 ss_thread: Got

Hi all, I have hit a wall configuring a TDM400, I have set these up before without issue but today I just can't seem to figure out what I am doing wrong. On an incoming call the following is produced in the Asterisk console with verbose 4 -- Starting simple switch on 'Zap/2-1' Mar 22 16:12:34 NOTICE[2051]: chan_zap.c:6063 ss_thread: Got event 18 (Ring Begin)... Mar 22

Like some others on the list spandsp is segfaulting asterisk when recieving a fax. I'm on debian testing/unstable with freshly checked out asterisk CVS and sandsp. My libtiff version is 3.6.1. Here is the GDB output --- snip ----- Changed from phase 5 to 4 Start rx document - compression 2 Start rx page >>> CFR: 84 HDLC underflow in state 5 Post trainability Changed from phase

Using the latest SVN of zaptel and asterisk, I can no longer receive incoming analog calls. The caller just hears it ringing but Asterisk doesn't pick up. I am seeing these error messages: [Apr 9 09:38:02] WARNING[16564]: chan_zap.c:6470 ss_thread: CallerID returned with error on channel 'Zap/2-1' [Apr 9 09:38:50] WARNING[16570]: chan_zap.c:6470 ss_thread: CallerID

I have an Asterisk server running todays CVS (updated it just in case that was the problem). It has 3 X100P cards. The first two lines I use as my normal work lines and the third is my fax line which I use with SpanDSP. I run Fedora Core 4. I have a problem that the third X100P does not answer the call. From the console I can see that there is an incoming call with the following: --

Hi, I have Asterisk 1.4.18 and I have been running call center queues on it. Today it suddenly stopped adding inbound calls to queues. I am facing with following error: app_queue.c:3939 queue_exec: unable to join queue "myqueue" In extension file: Queue(myqueue|t|||120) And my agents are joining in following

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi to everybody. First of all I hope this is the right place to discuss such an (nitpicky) issue. I've just been testing the current Opus release and for mere curiosity compared its performance to WMAPro with CD quality music at low bitrates (48 kbit/s). While Opus generally does a very good job, I found one particular example (a high pitched

Hi list, I am running TDM11b + Asterisk-1.4.9 + Zaptel-1.4.4 + Libpri-1.4.1 on CentOS 5. I am having trouble to make my simple IVR extension work, here is relevant config: zapata.conf ---- context=incoming signalling=fxs_ks channel => 4 context=internal signalling=fxo_ks channel => 1 ----- extensions.conf: ---- [office] exten => s,1,Dial(Zap/1,30) [home] exten =>

Hi, I'm running Asterisk 1.0.8 on Gentoo, with an X100P (clone) card, and I'm having problems with Caller ID. I have run clidtest, and it seems happy enough, returning:- server clidtest # ./clidtest /dev/zap/1 Number: 0412222222, Name: MOBILE (that number's fake.) However, I'm not getting the caller ID passed through with *. Sometimes I get a "failed checksum" like

Can anyone tell me what this message means? Got event 17 (Polarity Reversal)... I'm running DAHDI 2.0 with a TDM401 card. Asterisk version 1.6.0. It appears that I get this Polarity Reversal each time an inbound call hangs up. This results in another ring, but no one is there. It appears as an unknown caller, but I believe its a phantom. Thanks, Jim [Oct 10 12:47:54] NOTICE[6669]:

Hi, I've googled it and look in voip-info.org <http://voip-info.org> without any success. Hope someone can point me to the right direction. I saw a couple similar questions, but don't see any answers. Fedora Core 2 2 X100P(clone) PSTN Asterisk 1.07 Everything seems to be running fine, but on occasion, Asterisk answers the call with high pitch screech sound (like fax or modem

Aloha, I'm finishing up the final touches on this install, and have run into an odd problem. I can't seem to get Caller ID on the analog phone lines working. It's a Digium AEX 410 card. I have Verbose set and a line to print the CID: I have usecallerid=yes and callerid=asreceived set in both chan_dahdi.conf and users.conf [analog] include=>default exten =>