search for: vsync

Displaying 20 results from an estimated 232 matches for "vsync".

Did you mean: sync
2017 May 10
1
regression? no more separate xscreens
...ot; Device "Device0" EndSection Section "Screen" Identifier "Screen1" Device "Device1" EndSection *** Xorg.0.log *** [ 27.845] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 27.845] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 27.845] (II) modeset(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 27.845...
2009 Mar 27
3
[Bug 20915] New: Refresh rate out of range, server backtrace
...id=24327) --> (http://bugs.freedesktop.org/attachment.cgi?id=24327) bios I'm using a 9600GSO/386Mb card with a CRT Horizon Monitor connected using a dvi2vga connector and with the following modeline: ModeLine "1280x960 at 75" 129.9 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync This works in nv, nvidia and vesa drivers. In nouveau I get an Out of Range Popup, a plain black screen or a backtrace: Caught signal 8. Server aborting (EE) NOUVEAU(0): PLL limits table revision 0x30 not currently supported For certain fixed vertical and horizontal ranges I get either an out-o...
2016 May 05
6
CentOS 7 and 4K display
I installed C7 along with MATE desktop... My monitor is a 4K unit but when I goto the System -> preferences -> hardware -> Displays there is selection for the 4K display. It stops at 1920x1080. The var log x file shows the 4K resolutions in the file so that is good. How do I get the selections for 4K to show up? Thanks, Jerry
2009 Jul 26
0
Centos 5.3 on HP 2133 Mini-Note
...efault mode "1280x768": 80.1 MHz, 47.7 kHz, 60.0 Hz Modeline "1280x768-60.0" 80.14 1280 1344 1480 1680 768 769 772 795 # Default mode "1280x720": 74.6 MHz, 44.2 kHz, 59.2 Hz Modeline "1280x720-59.2" 74.60 1280 1341 1474 1688 720 721 724 746 -hsync +vsync # Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz Modeline "1024x768-60.0" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync EndSection Section "Monitor" Identifier "HP-2133 LCD" VertRefresh 50.00-100.00 # X11 discovery...
2010 Nov 17
4
[Bug 31684] New: No Xv acceleration with 7600 GT AGP (NV4B), last git drivers
....0) unless otherwise stated. (--) NOUVEAU(0): Virtual size is 1280x1024 (pitch 1280) (**) NOUVEAU(0): Driver mode "1280x1024": 157.5 MHz (scaled from 0.0 MHz), 91.1 kHz, 85.0 Hz (II) NOUVEAU(0): Modeline "1280x1024"x85.0 157.50 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync (91.1 kHz) (**) NOUVEAU(0): Mode "1600x1200": 206.0 MHz (scaled from 0.0 MHz), 94.0 kHz, 75.0 Hz (II) NOUVEAU(0): Modeline "1600x1200"x75.0 205.99 1600 1720 1896 2192 1200 1201 1204 1253 -hsync +vsync (94.0 kHz) (**) NOUVEAU(0): Driver mode "1600x1200": 202.5 MHz...
2016 Jul 08
1
Help with nouveau driver
...): 3336394d0a20202020202020000000ff [ 4.689] (II) NOUVEAU(0): 00000000000000000000000000000059 [ 4.689] (II) NOUVEAU(0): Printing probed modes for output DVI-I-1 [ 4.689] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP) [ 4.689] (II) NOUVEAU(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e) [ 4.689] (II) NOUVEAU(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)...
2011 Oct 13
1
xrandr or xorg.conf... help with virtual size desktop
...AU(0): 4b1e5511000a202020202020000000fc [ 26.642] (II) NOUVEAU(0): 0041535553205657323636480a2000b2 [ 26.642] (II) NOUVEAU(0): Printing probed modes for output DVI-I-1 [ 26.642] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) [ 26.642] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) [ 26.642] (II) NOUVEAU(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz) [ 26.642...
2012 May 04
1
NV43: Native resolution not available on Dell 2007FP
...sing EDID range info for horizontal sync [ 4677.074] (II) NOUVEAU(0): Using EDID range info for vertical refresh [ 4677.074] (II) NOUVEAU(0): Printing DDC gathered Modelines: [ 4677.074] (II) NOUVEAU(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz) [ 4677.074] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 4677.074] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) [ 4677.074] (II) NOUVEAU(0...
2014 Oct 28
5
[Bug 85570] New: DPMS does not turn off LCD backlight on G73 (NV4B) [GeForce 7600 GS]
...AU(0): 4b185211000a202020202020000000fc [ 25.261] (II) NOUVEAU(0): 00565832363430770a2020202020002a [ 25.261] (II) NOUVEAU(0): Printing probed modes for output VGA-1 [ 25.261] (II) NOUVEAU(0): Modeline "1920x1200"x60.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP) [ 25.261] (II) NOUVEAU(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e) [ 25.261] (II) NOUVEAU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)...
2009 Jul 20
2
Installation of CentOS 5.3 on to Hp 2133
...efault mode "1280x768": 80.1 MHz, 47.7 kHz, 60.0 Hz Modeline "1280x768-60.0" 80.14 1280 1344 1480 1680 768 769 772 795 # Default mode "1280x720": 74.6 MHz, 44.2 kHz, 59.2 Hz Modeline "1280x720-59.2" 74.60 1280 1341 1474 1688 720 721 724 746 -hsync +vsync # Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz Modeline "1024x768-60.0" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync EndSection Section "Monitor" Identifier "HP-2133 LCD" VertRefresh 50.00-100.00 # X11 discovery...
2016 May 06
0
CentOS 7 and 4K display
...ctive: 3840 h_sync: 3888 h_sync_end 3920 h_blank_end 4000 h_border: 0 [ 6.540] (II) NOUVEAU(0): h_active: 3840 h_sync: 4016 h_sync_end 4104 h_blank_end 4400 h_border: 0 [ 6.996] (II) NOUVEAU(0): Modeline "3840x2160"x0.0 533.25 3840 3888 3920 4000 2160 2163 2168 2222 +hsync -vsync (133.3 kHz eP) [ 6.996] (II) NOUVEAU(0): Modeline "3840x2160"x0.0 297.00 3840 4016 4104 4400 2160 2168 2178 2250 +hsync -vsync (67.5 kHz e) [ 7.104] (II) NOUVEAU(0): Modeline "3840x2160"x0.0 533.25 3840 3888 3920 4000 2160 2163 2168 2222 +hsync -vsync (133.3 kHz eP...
2008 Jan 02
1
[Fwd: Problems with two S3 video devices.]
...g default mode "840x525" (width too large for virtual size) (--) S3VIRGE(0): Virtual size is 800x600 (pitch 800) (**) S3VIRGE(0): *Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz (II) S3VIRGE(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync (**) S3VIRGE(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz (II) S3VIRGE(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (**) S3VIRGE(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz (II) S3VIRGE(0): Modeline "800x...
2016 Apr 05
1
[Bug 94826] New: Cannot set external display as primary in optimus mode
...(G0): Using hsync ranges from config file [ 2392.883] (II) NOUVEAU(G0): Using vrefresh ranges from config file [ 2392.883] (II) NOUVEAU(G0): Printing DDC gathered Modelines: [ 2392.883] (II) NOUVEAU(G0): Modeline "2560x1600"x0.0 268.50 2560 2608 2640 2720 1600 1603 1609 1646 +hsync -vsync (98.7 kHz eP) [ 2392.883] (II) NOUVEAU(G0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e) [ 2392.883] (II) NOUVEAU(G0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (...
2015 Dec 01
4
New monitor weirdnesses (CentOS 5.11)
...ad to do that that I have totally forgotten how to do it. And I have been unable to find it with a websearch either. >From /var/log/Xorg.0.log: (II) VESA(0): Printing DDC gathered Modelines: (II) VESA(0): Modeline "1366x768"x0.0 85.50 1366 1436 1579 1792 768 771 774 798 +hsync +vsync (47.7 kHz) (II) VESA(0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz) (II) VESA(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) VESA(0): Modeline "800x600"x0.0 36.00...
2012 Apr 09
12
[Bug 48464] New: Crash when GLXVBlank set to true
https://bugs.freedesktop.org/show_bug.cgi?id=48464 Bug #: 48464 Summary: Crash when GLXVBlank set to true Classification: Unclassified Product: xorg Version: git Platform: x86-64 (AMD64) OS/Version: Linux (All) Status: NEW Severity: normal Priority: medium Component: Driver/nouveau
2018 Sep 23
2
Strange monitor behavior on forced DVI-D output
On Sun, Sep 23, 2018 at 12:26 PM, Wolfgang Rißler <wolle321 at freenet.de> wrote: > I try to send a friendly ping to my problem. > At the moment I'm running at 1600x1200 (monitor than has 1600x1200 > too), what looks better then 1920x1200 picture on that Monitor with > 960x1200. > I cant get 1920x1200 working, but I'm shure, that the monitor has this > native
2008 Feb 18
6
system-config-display wrongly sets up Viewsonic VG730m monitor
I originally set up this monitor with an analogue lead. Everything seemed fine, so I didn't check xorg.conf at all. Then I bought a digital lead, and since then the monitor blinks. Running system-config-display identifies it as a 1280 x 1084 CRT monitor. It is an LCD monitor. That model is not on the drop-down list, so assuming that a specific driver wasn't available for it, I
2014 Dec 13
0
[Bug 82714] [G84] nouveau fails to properly initialize GPU
...202020000000fc0031 (II) NOUVEAU(0): 37544654204c4344204d4e54000000fe (II) NOUVEAU(0): 003230303230353133202020202000d3 (II) NOUVEAU(0): Printing probed modes for output VGA-1 (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 -hsync -vsync (64.0 kHz eP) (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) (II) NOUVEAU(0): Modeline &qu...
2016 Jul 08
0
Help with nouveau driver
...): 3336394d0a20202020202020000000ff [ 4.689] (II) NOUVEAU(0): 00000000000000000000000000000059 [ 4.689] (II) NOUVEAU(0): Printing probed modes for output DVI-I-1 [ 4.689] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP) [ 4.689] (II) NOUVEAU(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e) [ 4.689] (II) NOUVEAU(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)...
2016 May 06
2
CentOS 7 and 4K display
...h_sync_end 3920 > h_blank_end 4000 h_border: 0 > [ 6.540] (II) NOUVEAU(0): h_active: 3840 h_sync: 4016 h_sync_end 4104 > h_blank_end 4400 h_border: 0 > [ 6.996] (II) NOUVEAU(0): Modeline "3840x2160"x0.0 533.25 3840 3888 > 3920 4000 2160 2163 2168 2222 +hsync -vsync (133.3 kHz eP) > [ 6.996] (II) NOUVEAU(0): Modeline "3840x2160"x0.0 297.00 3840 4016 > 4104 4400 2160 2168 2178 2250 +hsync -vsync (67.5 kHz e) > [ 7.104] (II) NOUVEAU(0): Modeline "3840x2160"x0.0 533.25 3840 3888 > 3920 4000 2160 2163 2168 2222 +hsync...