search for: cuaa0

.../sh # ## /usr/local/etc/rc.d/nut.sh : start/stop nut (ups management) # PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin NAME=nut case "$1" in start) echo "Starting and checking (5 times) for nut driver mge-shut" chmod 0600 /dev/cuaa0 chown nut:nut /dev/cuaa0 COUNTER=5 until [ $COUNTER -le 0 ]; do let COUNTER-=1 echo "attempt to start driver mge-shut" /usr/local/ups/bin/upsdrvctl start sleep 10 echo &...

Hi Has anyone got a Compaq(/HP) T700 UPS to work with the BCMXCP driver? I've built yesterday's CVS of NUT 2.1 on one of my FreeBSD systems but chown root:wheel /dev/cuaa0 /usr/local/libexec/upsdrvctl -u root start gives: -- Network UPS Tools - UPS driver controller 2.1.0 Network UPS Tools - BCMXCP UPS driver 0.10 (2.1.0) Communications with UPS lost: Error executing command Communications with UPS lost: Error executing command Communications with UPS lost: Error e...

...st battery.charge: 82 battery.charge.low: 30 battery.runtime: 01406 driver.flag.nolock: enabled driver.name: mge-shut driver.parameter.lowbatt: 90 driver.parameter.notification: 3 driver.parameter.offdelay: 60 driver.parameter.ondelay: 9 driver.parameter.pollinterval: 15 driver.parameter.port: /dev/cuaa0 driver.version: 2.0.2 driver.version.internal: 0.64 outlet.0.desc: Main Outlet outlet.0.id: 1 outlet.0.switchable: 0 outlet.1.autoswitch.charge.low: 0 outlet.1.desc: PowerShare Outlet 1 outlet.1.id: 2 outlet.1.switch: 1 outlet.1.switchable: 0 output.voltage: 230 ups.delay.shutdown: -1 ups.delay.sta...

...0.00020997,0.0} driver.parameter.linevoltage: 110 driver.parameter.loadPercentage: {6.1343,-0.3808,1.075,0.1811} driver.parameter.manufacturer: PowerCom driver.parameter.methodOfFlowControl: dtr0rts1 driver.parameter.numOfBytesFromUPS: 16 driver.parameter.pollinterval: 2 driver.parameter.port: /dev/cuaa0 driver.parameter.shutdownArguments: {{0,10},n} driver.parameter.type: KIN2200AP driver.parameter.validationSequence: {{7,0},{8,0},{8,0}} driver.parameter.voltage: {1.9216,-0.0977,0.82857,0.0000} driver.version: 2.2.0 driver.version.internal: $ Revision: 0.5 $ input.frequency: 0.00 input.voltage: 0....

...might have answerd this, but I can not find any think yet I am trying to load a SOLA 610 700va ups up and keep getting : --------------------------------- Network UPS Tools - UPS driver controller 2.0.5 Network UPS Tools - MGE UPS SYSTEMS/U-Talk driver 0.88 (2.0.5) .Detected Pulsar ESV11+ on /dev/cuaa0 Network UPS Tools - Best UPS driver 1.03 (2.0.5) Unknown model detected - please report this ID: 'SOLA' Detected Unknown Unknown SOLA (SOLA) on /dev/cuaa1 Starting nut. Network UPS Tools upsd 2.0.5 Connected to UPS [mge]: mge Connected to UPS [sola]: sola -------------------------------- T...

...hen I do a "upsrw" I get : [outlet.0.desc] [outlet.1.autoswitch.charge.low] [outlet.1.desc] [outlet.1.switch] [ups.delay.shutdown] Is that the ONLY items I can get besides : battery.charge: 0 battery.charge.low: 30 battery.runtime: 00000 driver.name: mge-shut driver.parameter.port: /dev/cuaa0 driver.version: 2.0.3 driver.version.internal: 0.65 outlet.0.desc: Main Outlet outlet.0.switchable: 0 outlet.1.autoswitch.charge.low: 0 outlet.1.desc: PowerShare Outlet 1 outlet.1.id: 2 outlet.1.switch: 1 outlet.1.switchable: 1 ups.delay.shutdown: -1 ups.load: 6 ups.mfr: MGE UPS SYSTEMS ups.serial:...

Skipped content of type multipart/mixed-------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: not available Url : http://lists.freebsd.org/pipermail/freebsd-stable/attachments/20060322/b3ddf5ba/attachment-0001.pgp

On Feb 2, 2008 10:16 AM, Luki <looky at poczta.fm> wrote: > Hello Carlos > > could you please help me to solve issue with Mustek 1000VA UPS under > Freebsd ? > I am not able to connect with it : > > >Network UPS Tools - UPS driver controller > >Network UPS Tools - Megatec protocol driver 1.5.4 [megatec] > >Carlos Rodrigues (c) 2003-2007 > >

Hi folks, has anyone been successful in getting a Mustek PowerMust 500 to talk to nut? All my attempts (tried "mustek" and "powermust" as drivers) have been unsuccessful so far. Thanks for any clues. Sascha -- http://yoyodyne.ath.cx

...bit off topic, but I'm hoping someone has seen this before. I'm running a couple of headless boxes, one is 4.7 release, the other is 4.8 release. Both have the same issue with newsyslog when I've got the serial port enabled for console management. (-h in boot.conf and a getty running on cuaa0 after the boot process) Logrotate tries to send an HUP to syslogd, but it's not working properly. I get rotated logs, but they stay empty. If I "nuke" syslogd, and try to restart it, it eventually dies with "waiting for child" messages and my sendmail hangs. Syslogd comes b...

Hey *, I'm getting an audit coming down the pipes and I have 2 4.6 release boxes to clean up. I say "clean up" because they have some requirements that I missed despite due diligence. My specific question is: To what extent can I get rid of UUCP? Aside from the SUID/SGID stuff that pops up via my finds, I simply see no reason to have any UUCP stuff on these boxes. Is this stuff

Hi, I took the advice of Daniel O'Connor, found out what variables I had available to me, and put them in the conf. So now it looks like : [ellipse] driver = mge-shut port = /dev/cuaa0 desc = "UPS" lowbatt = 5 offdelay = 120 let the UPS charge up fully, 24 hours. I plugged a single lamp into it, with a 60W bulb. At 3:40p I pulled the power. This is a sample of some readings I took since then : Time % Charge Load 3:40...

...ts] "Resolution" = "96" "Default" = "-adobe-helvetica-" "DefaultFixed" = "fixed" "DefaultSerif" = "-adobe-times-" "DefaultSansSerif" = "-adobe-helvetica-" [serialports] "Com1" = "/dev/cuaa0" "Com2" = "/dev/cuaa1" "Com3" = "/dev/cuaa2" "Com4" = "/dev/cuaa3" [registry] "LoadGlobalRegistryFiles" = "Y" "LoadHomeRegistryFiles" = "Y" "LoadWindowsRegistryFiles" = "Y"...

...sudo /usr/local/ups/bin/upsc ups_tamiaserver@localhost Password: battery.charge: 36 battery.charge.low: 30 battery.runtime: 00617 driver.name: mge-shut driver.parameter.lowbatt: 90 driver.parameter.notification: 3 driver.parameter.offdelay: 20 driver.parameter.ondelay: 3 driver.parameter.port: /dev/cuaa0 driver.version: 2.0.3-pre1 driver.version.internal: 0.65 outlet.0.desc: Main Outlet outlet.0.id: 1 outlet.0.switchable: 0 outlet.1.autoswitch.charge.low: 0 outlet.1.desc: PowerShare Outlet 1 outlet.1.id: 2 outlet.1.switch: 1 outlet.1.switchable: 0 output.voltage: 230 ups.delay.shutdown: -1 ups.dela...

Hi Stefanos, you should mail to the NUT list, and try the megatec driver, which is only available from subversion for the moment (but should be included in the next stable release). Carlos might give you some help with this driver. Arnaud Quette -- Linux / Unix Expert - MGE UPS SYSTEMS - R&D Dpt Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/ Debian Developer -

Hi all, I have two prodction servers with FreeBSD 5.4 (all security patches are applied). They running some services like dns, ssh, http, ftp, etc. But I woukd like to encrypt some services for some hosts with ipsec when it is accessed. For example: - DNS resolution: not encrypted. - DNS replication master-slave: encrypted by ipsec. - Telnet: encrypted by ipsec for some hosts. Deny