samba - Nov 1999 - Printing using smbclient

Hi all

I trying to using smbclient to print to a shared printer on a Windows 98 PC
but when I run smbclient (with debug level 5) I get the following error....

	number of interfaces returned is: 3
	Added interface ip=192.100.100.100 bcast=192.100.100.255
nmask=255.255.255.0
	Opening sockets
	Connecting to 192.100.100.30 at port 139
	Connected
	Sent session request
	size=35
	smb_com=0x72
	smb_rcls=2
	smb_reh=0
	smb_err=1311
	smb_flg=128
	smb_flg2=0
	smb_tid=0
	smb_pid=23915
	smb_uid=0
	smb_mid=24015
	smt_wct=0
	smb_bcc=0
	SMBnegprot failed. myname=EUROGEN1 destname=SOMPOB - ERRSRV - 1311

Can anyone throw any light on what might be wrong, I've used smbclient in
this way lots of times before and never had a problem so I'm somewhat
perplexed by this one.

Thanks in advance

Malcolm Burtt
Senior Analyst
EuroGen Systems Limited.

-------------- next part --------------
HTML attachment scrubbed and removed

I can see the windows client from my DG-UNIX server.

# /usr/local/samba/bin/smbclient -L publicaud
Added interface ip=192.168.168.25 bcast=192.168.168.255 nmask=255.255.255.0
Server time is Mon Nov 11 16:10:22 2002
Timezone is UTC-5.0
security=share

Server=[PUBLICAUD] User=[] Workgroup=[AUDITOR] Domain=[AUDITOR]

        Sharename      Type      Comment
        ---------      ----      -------
        FX900          Printer
        IPC$           IPC       Remote Inter Process Communication
        PRINTER$       Disk

# lp -d fx900 /.profle
UX:lp: ERROR: Destination "fx900" is unknown to the
        LP print service.

How do I print to it?

Steven L. Hawks
External IT Support
Cole-Layer-Trumble Company
(937) 276-5261 x 235

The command to print basically is:
cat file_already_formatted_for_your_printer | smbclient //server/printer -c
'print -'
You will have to include some stuff for passwords and all.
This can be made much more complicated, of course. You can set up a print
queue on your linux server which filters the file and then sends it to your
windows printer with the above command.
The biggest problem is getting a print filter for your printer which runs
under linux. What is the name and model of your printer. The best of all
worlds is that it is a postscript printer.
Joel


On Sun, Nov 17, 2002 at 12:15:20PM -0500, Steven L Hawks
wrote:
> 
> no replies
> 
> Steven L. Hawks
> External IT Support
> Cole-Layer-Trumble Company
> (937) 276-5261 x 235
> 
> 
>
>                       Joel Hammer
>                       <Joel@HammersHome        To:       Steven L Hawks
<SLHawks@cltco.com>
>                       .com>                    cc:
>                                                Subject:  Re: [Samba]
Printing using smbclient
>                       11/16/02 05:23 PM
>
>
> 
> 
> 
> 
> Have you had any replies to this?
> Joel
> On Mon, Nov 11, 2002 at 02:57:33PM -0500, Steven L Hawks wrote:
> > I can see the windows client from my DG-UNIX server.
> >
> > # /usr/local/samba/bin/smbclient -L publicaud
> > Added interface ip=192.168.168.25 bcast=192.168.168.255
> nmask=255.255.255.0
> > Server time is Mon Nov 11 16:10:22 2002
> > Timezone is UTC-5.0
> > security=share
> >
> > Server=[PUBLICAUD] User=[] Workgroup=[AUDITOR] Domain=[AUDITOR]
> >
> >         Sharename      Type      Comment
> >         ---------      ----      -------
> >         FX900          Printer
> >         IPC$           IPC       Remote Inter Process Communication
> >         PRINTER$       Disk
> >
> > # lp -d fx900 /.profle
> > UX:lp: ERROR: Destination "fx900" is unknown to the
> >         LP print service.
> >
> > How do I print to it?
> >
> > Steven L. Hawks
> > External IT Support
> > Cole-Layer-Trumble Company
> > (937) 276-5261 x 235
> >
> > --
> > To unsubscribe from this list go to the following URL and read the
> > instructions:  http://lists.samba.org/mailman/listinfo/samba
> 
> 
> 
>